From: John T. <cv...@cv...> - 2008-07-28 23:02:11
|
Modified file emc2/configs/stepper/pluto_inch.ini Full file: <http://cvs.linuxcnc.org/cvs/emc2/configs/stepper/pluto_inch.ini?rev=1.6> Difference: <http://cvs.linuxcnc.org/cvs/emc2/configs/stepper/pluto_inch.ini.diff?r1=1.5;r2=1.6> Branch: TRUNK Log: revision 1.6 date: 2008/07/28 23:02:01; author: bigjohnt; state: Exp; lines: +3 -1 Added EDITOR to all configs that use AXIS --- pluto_inch.ini 2007/10/12 13:40:16 1.5 +++ pluto_inch.ini 2008/07/28 23:02:01 1.6 @@ -13,7 +13,7 @@ [EMC] #- Version of this INI file -VERSION = $Revision: 1.5 $ +VERSION = $Revision: 1.6 $ #+ Name of machine, for use with display, etc. MACHINE = EMC-HAL-STEP-PLUTO @@ -53,6 +53,8 @@ INTRO_GRAPHIC = emc2.gif INTRO_TIME = 5 +# Editor to be used with Axis +EDITOR = gedit ############################################################################### # Task controller section Modified file emc2/configs/stepper/sim_inch.ini Full file: <http://cvs.linuxcnc.org/cvs/emc2/configs/stepper/sim_inch.ini?rev=1.13> Difference: <http://cvs.linuxcnc.org/cvs/emc2/configs/stepper/sim_inch.ini.diff?r1=1.12;r2=1.13> Branch: TRUNK Log: revision 1.13 date: 2008/07/28 23:02:01; author: bigjohnt; state: Exp; lines: +3 -1 Added EDITOR to all configs that use AXIS --- sim_inch.ini 2007/10/12 18:33:03 1.12 +++ sim_inch.ini 2008/07/28 23:02:01 1.13 @@ -13,7 +13,7 @@ [EMC] #- Version of this INI file -VERSION = $Revision: 1.12 $ +VERSION = $Revision: 1.13 $ #+ Name of machine, for use with display, etc. MACHINE = EMC-HAL-STEP-SIM @@ -58,6 +58,8 @@ INTRO_GRAPHIC = emc2.gif INTRO_TIME = 5 +# Editor to be used with Axis +EDITOR = gedit ############################################################################### # Task controller section Modified file emc2/configs/stepper/stepper_inch.ini Full file: <http://cvs.linuxcnc.org/cvs/emc2/configs/stepper/stepper_inch.ini?rev=1.18> Difference: <http://cvs.linuxcnc.org/cvs/emc2/configs/stepper/stepper_inch.ini.diff?r1=1.17;r2=1.18> Branch: TRUNK Log: revision 1.18 date: 2008/07/28 23:02:01; author: bigjohnt; state: Exp; lines: +3 -1 Added EDITOR to all configs that use AXIS --- stepper_inch.ini 2007/10/12 18:33:03 1.17 +++ stepper_inch.ini 2008/07/28 23:02:01 1.18 @@ -13,7 +13,7 @@ [EMC] #- Version of this INI file -VERSION = $Revision: 1.17 $ +VERSION = $Revision: 1.18 $ #+ Name of machine, for use with display, etc. MACHINE = EMC-HAL-STEP-IN @@ -58,6 +58,8 @@ INTRO_GRAPHIC = emc2.gif INTRO_TIME = 5 +# Editor to be used with Axis +EDITOR = gedit ############################################################################### # Task controller section |