From: Mario. <em...@gm...> - 2008-05-21 08:26:54
|
This is all great gyus, but I still have the feeling it would be nice to mention this in the documentation. Remember the guides and manuals fall into obsolescence with every one - no matter how good improvement. :) On 5/21/08, John Kasunich <jmk...@fa...> wrote: > Dewey Garrett wrote: > > I've been using halscope frequently for a number of distinct purposes but don't > > like setting it up or wrangling the config file (.scope.cfg) each time so I > > made a simple change to halscope that lets a user specify an input file to read > > and/or an output file to write for configuration items. > > > > Modified behavior: > > > > $ halscope -h > > Usage: > > halscope [-h] [-i infile] [-o outfile] [num_samples] > > > > The current behavior is not affected. > > > > John Kasunich suggested I post about it here to see if there's > > any interest in adding a patch to CVS. > > > > The one modified file (scope.c) is posted at: > > > > http://pastebin.ca/1021409 > > > > > > dgarrett > > > > > > > Dewey: > > Well it took me several weeks to get around to it, but I committed your > patches - both the halscope one mentioned above, and the hal_joystick > one that you sent me privately. I tweaked the latter a bit so that the > pin names remain "joystick.0.foo" unless you specify a prefix with -p. > The default component name is now "hal_joystick" and the default prefix > is "joystick.0". The -p option changes both name and prefix to whatever > is specified. > > Thanks for your contributions! > > Regards, > > > John Kasunich > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-developers mailing list > Emc...@li... > https://lists.sourceforge.net/lists/listinfo/emc-developers > |