From: Pekka S. <pek...@ko...> - 2002-04-11 18:40:45
|
and 3rd try. Maybe I need to learn how to use my email client ;-) On Thu, 11 Apr 2002 21:39:08 -0200 Pekka Sakara <pek...@ko...> wrote: > yeah and attached file too... :-) > > On Thu, 11 Apr 2002 21:36:12 -0200 > Pekka Sakara <pek...@ko...> wrote: > > > > I have forgoten to pas cell with 0xff when sending. This was causing > > > trouble when sending more than one cell in an urb. > > > This is corected and should work now. > > > > Yes, eci module is almost usable now... :-) > > > > This evening I had ADSL-line up and running from 20:13 to 21:06 and in that time I performed some test with eci. > > > > I downloaded 28.8Megs big file, speed was just great, 52kB/s. Maximum that I can get with my 512k ADSL connection. > > > > I had ping running all the time in another console, once ping died with segmentation fault message and I got stuff to my syslog (I'll try to run oops trace to find out what caused ping to die)... > > > > But then I tried to upload file with ftp and then my system hang. In this point clock here in Finland was 21:06. Every time I try this, system hang. Remote ftpd system recieves 0 to 2k data and then nothing becouse my system hang. And I can duplicate this as many times you want. > > > > Attached is part of my system log. > > > > In first part I had normal debug settings, log all to syslog from eci. Then at 20:13 I get ADSL back up and running with recompiled eci where I turned most debugging stuff off from eci to see if I can get more speed... to my suprice there was not real difference in data transfer speed with debug or without debug in eci. Crc-errors in log happened in time of downloading that 28.8M file. > > > > Regards, > > psakara > > > |