From: Kostas G. <gew...@im...> - 2000-09-30 17:59:36
|
On Fri, 29 Sep 2000, Michel [iso-8859-1] Dδnzer wrote: > > There was a patch very recently to the XFree86 CVS tree that looked like > > it would fix the DDC failure in the r128 driver. Try that patch and see > > if you get past this problem. > > I will, I just don't let the driver fail if the DDC init function fails for > now. The DDC code will never work in ppc as it is now , it depends in vbe/int10 which requires a x86 BIOS in the card. Note that for now it will fail for cards with x86 BIOS as well since ISA IO/MEM accesses don't work for linux/ppc. > > The new Rage 128 Mobility code is on the trunk. The driver now reads > > the display mode parameters from the video BIOS mode tables since those > > are the only parameters that are guaranteed to work with the graphics > > chip and flat panel in your system (this info is directly from ATI). > > I'm not sure how this will affect the PPC code. If it cannot access the > > video BIOS, then I'm not sure if/how it will work. > > Apparently there is no video BIOS at all, we can only determine the PLL values > from what OF set them to. Do you think this could be done for the FP > parameters as well? The OF method wasn't working perfectly we were still leaving some of the PLL values at the default setting :(. It will be better to check if there is anything we can use in the OF rom, the values might be there as well either in a table similar to the x86 one or in lost somewhere in forth code ... Kostas |