From: Alan H. <al...@fa...> - 2003-04-07 23:15:44
|
On Tue, Apr 08, 2003 at 01:02:07AM +0200, Michel D=E4nzer wrote: > On Mon, 2003-04-07 at 18:45, Ian Romanick wrote:=20 > >=20 > > There are basically four states that the driver can be in WRT vertica= l=20 > > refresh synchronization. > >=20 > > 1. Application preference. The application can select the number of=20 > > vertical refreshes that must occur between buffer swaps (aka the swap= =20 > > interval). The default value is 1. This is the default setting. > >=20 > > 2. No-vsync. No swap throttling or refresh synchronization occurs.=20 > > This is the old default, but it is now controlled by setting=20 > > 'LIBGL_NO_VSYNC=3D1'. > >=20 > > 3. "Throttle refresh." This is like #1, but the application cannot=20 > > change the swap interval from the default setting of 1. This is=20 > > selected by 'LIBGL_THROTTLE_REFRESH=3D1'. IMHO, this setting is of l= ittle=20 > > use and should be depricated. >=20 > Why not simply drop it in favour of the new default? Assuming it stays= , > that is, which I vote for, along with adding support for the swap > extension(s) to glxgears. Don't the nvidia drivers default to this as > well? =20 No. I get over 4000 fps with glxgears on a Quadro4 750XGL, by default. Alan. |