[Dri-patches] Re: [Dri-users] Mach64 dri setup

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Ok the patch is atttached, you have what we call a "Mach64 LB" or PCI_CHIP_MACH64LB.
In order to use this patch you'l need to build from source.

--- Shan Mignot <sha...@fr...> wrote:
> Hi,
> 
> I've recently downloaded the dri package 
> (mach64-20020705-linux.i386.tar.bz2) for the mach64 chipset and tried 
> to set things up. Here is what lspci reports about my graphic card:
> 
> 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro 
> AGP-133 (rev dc) (prog-if 00 [VGA])
>          Subsystem: CLEVO/KAPOK Computer: Unknown device 0280
>          Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping+ SERR- FastB2B-
>          Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- 
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>          Latency: 8 min, 66 set, cache line size 08
>          Region 0: Memory at fd000000 (32-bit, non-prefetchable) 
> [size=16M]
>          Region 1: I/O ports at 2000 [size=256]
>          Region 2: Memory at fc100000 (32-bit, non-prefetchable) 
> [size=4K]
>          Expansion ROM at <unassigned> [disabled] [size=128K]
>          Capabilities: <available only to root>
> 
> Although XFree86 detects 8 Mo of video memory, it does not use of the 
> it and hence the buffer allocation fails and xdm refuses to start my 
> window manager. Here is what I think is relevant from my XFree86.0.log 
> file:
> 
> (II) ATI:  Candidate "Device" section "ATI 3D LT PRO".
> (II) ATI:  Shared PCI/AGP Mach64 in slot 1:0:0 detected.
> (II) ATI:  Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active 
> "Device" section "ATI 3D LT PRO".
> (II) ATI(0): VESA BIOS detected
> (II) ATI(0): VESA VBE Version 2.0
> (II) ATI(0): VESA VBE Total Mem: 8128 kB
> (II) ATI(0): VESA VBE OEM: ATI MACH64
> (II) ATI(0): VESA VBE OEM Software Rev: 1.0
> (II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
> (II) ATI(0): VESA VBE OEM Product: MACH64LP
> (II) ATI(0): VESA VBE OEM Product Rev: 01.00
> (II) ATI(0): VESA VBE DDC supported
> (II) ATI(0): VESA VBE DDC Level none
> (II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
> (II) ATI(0): VESA VBE DDC read failed
> (--) ATI(0): ATI 3D Rage LT Pro graphics controller detected.
> (--) ATI(0): Chip type 4C42 "LB", version 4, foundry UMC, class 0, 
> revision 0x03.
> (--) ATI(0): AGP bus interface detected;  block I/O base is 0x2000.
> (--) ATI(0): ATI Mach64 adapter detected.
> (!!) ATI(0): For information on using the multimedia capabilities
>   of this adapter, please see http://gatos.sf.net.
> (--) ATI(0): Internal RAMDAC (subtype 1) detected.
> (==) ATI(0): RGB weight 888
> (==) ATI(0): Default visual is TrueColor
> (==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) ATI(0): Using Mach64 accelerator CRTC.
> (--) ATI(0): 1024x768 panel (ID 2) detected.
> (--) ATI(0): Panel model LG LP150X1.
> (--) ATI(0): Panel clock is 65.146 MHz.
> (II) ATI(0): Using digital flat panel interface.
> (II) ATI(0): Storing hardware cursor image at 0xFD7FFC00.
> (II) ATI(0): Using 8 MB linear aperture at 0xFD000000.
> (!!) ATI(0): Virtual resolutions will be limited to 8191 kB
>   due to linear aperture size and/or placement of hardware cursor image 
> area.
> (II) ATI(0): Using Block 0 MMIO aperture at 0xFC100400.
> (II) ATI(0): Using Block 1 MMIO aperture at 0xFC100000.
> (==) ATI(0): Write-combining range (0xfd000000,0x800000)
> (II) ATI(0): MMIO write caching enabled.
> (--) ATI(0): 8192 kB of SGRAM (1:1) detected (using 8191 kB).
> (WW) ATI(0): Cannot shadow an accelerated frame buffer.
> (--) ATI(0): Internal programmable clock generator detected.
> (--) ATI(0): Reference clock 29.500 MHz.
> (WW) ATI(0): DRI static buffer allocation failed -- need at least 8192 
> kB video memory
> (II) ATI(0): Largest offscreen areas (with overlaps):
> (II) ATI(0):    1024 x 1279 rectangle at 0,768
> (II) ATI(0):    768 x 1280 rectangle at 0,768
> (II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
>          Screen to screen bit blits
>          Solid filled rectangles
>          8x8 mono pattern filled rectangles
>          Indirect CPU to Screen color expansion
>          Solid Lines
>          Offscreen Pixmaps
>          Setting up tile and stipple cache:
>                  32 128x128 slots
>                  10 256x256 slots
> 
> (==) ATI(0): Backing store disabled
> (==) ATI(0): Silken mouse enabled
> (**) Option "dpms"
> (**) ATI(0): DPMS enabled
> (II) ATI(0): Direct rendering disabled
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (II) Keyboard "Generic Keyboard" handled by legacy driver
> (**) Option "Protocol" "PS/2"
> (**) Configured Mouse: Protocol: "PS/2"
> (**) Option "CorePointer"
> (**) Configured Mouse: Core Pointer
> (**) Option "Device" "/dev/psaux"
> (==) Configured Mouse: Buttons: 3
> (**) Option "Emulate3Buttons" "true"
> (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
> (**) Option "ZAxisMapping" "4 5"
> (**) Configured Mouse: ZAxisMapping: buttons 4 and 5
> (II) XINPUT: Adding extended input device "Configured Mouse" (type: 
> MOUSE)
> AUDIT: Thu Jul 11 16:00:59 2002: 245 X: client 2 rejected from local 
> host
>    Auth name: XDM-AUTHORIZATION-1 ID: -1
> AUDIT: Thu Jul 11 16:00:59 2002: 245 X: client 3 rejected from local 
> host
>    Auth name: XDM-AUTHORIZATION-1 ID: -1
> 
> And here is the content of my /etc/X11/XF86-Config-4 file:
> 
> Section "Files"
>          FontPath        "unix/:7100"                    # local font 
> server
>          # if the local font server has problems, we can fall back on 
> these
>          FontPath        "/usr/lib/X11/fonts/misc"
>          FontPath        "/usr/lib/X11/fonts/cyrillic"
>          FontPath        "/usr/lib/X11/fonts/100dpi/:unscaled"
>          FontPath        "/usr/lib/X11/fonts/75dpi/:unscaled"
>          FontPath        "/usr/lib/X11/fonts/Type1"
>          FontPath        "/usr/lib/X11/fonts/Speedo"
>          FontPath        "/usr/lib/X11/fonts/100dpi"
>          FontPath        "/usr/lib/X11/fonts/75dpi"
> EndSection
> 
> Section "Module"
>          Load    "GLcore"
>          Load    "bitmap"
>          Load    "dbe"
>          Load    "ddc"
>          Load    "dri"
>          Load    "extmod"
>          Load    "freetype"
>          Load    "glx"
>          Load    "int10"
>          Load    "pex5"
>          Load    "record"
>          Load    "speedo"
>          Load    "type1"
>          Load    "vbe"
>          Load    "xie"
> EndSection
> 
> Section "InputDevice"
>          Identifier      "Generic Keyboard"
>          Driver          "keyboard"
>          Option          "CoreKeyboard"
>          Option          "XkbRules"      "xfree86"
>          Option          "XkbModel"      "pc101"
>          Option          "XkbLayout"     "us"
> EndSection
> 
> Section "InputDevice"
>          Identifier      "Configured Mouse"
>          Driver          "mouse"
>          Option          "CorePointer"
>          Option          "Device"                "/dev/psaux"
>          Option          "Protocol"              "PS/2"
>          Option          "Emulate3Buttons"       "true"
>          Option          "ZAxisMapping"          "4 5"
> EndSection
> 
> Section "Device"
>          Identifier      "ATI 3D LT PRO"
>          Driver          "ati"
>          VendorName      "ATI"
>          BoardName       "MACH64 LB"
>          Chipset         "ati"
>          ChipId          0x4c42
>          ChipRev         0xdc
>          BusId           "PCI:1:0:0"
>          VideoRam        8192
> EndSection
> 
> Section "Monitor"
>          Identifier      "Generic Monitor"
>          Option          "DPMS"
>          VendorName      "Monitor Vendor"
>          ModelName       "Monitor Model"
> EndSection
> 
> Section "Screen"
>          Identifier      "Default Screen"
>          Device          "ATI 3D LT PRO"
>          Monitor         "Generic Monitor"
>          DefaultDepth    24
>          SubSection "Display"
>                  Depth           1
>                  Modes           "1024x768" "800x600" "640x480"
>          EndSubSection
>          SubSection "Display"
>                  Depth           4
>                  Modes           "1024x768" "800x600" "640x480"
>          EndSubSection
>          SubSection "Display"
>                  Depth           8
>                  Modes           "1024x768" "800x600" "640x480"
>          EndSubSection
>          SubSection "Display"
>                  Depth           15
>                  Modes           "1024x768" "800x600" "640x480"
>          EndSubSection
>          SubSection "Display"
>                  Depth           16
>                  Modes           "1024x768" "800x600" "640x480"
>          EndSubSection
>          SubSection "Display"
>                  Depth           24
>                  Modes           "1024x768" "800x600" "640x480"
>          EndSubSection
> EndSection
> 
> Section "ServerLayout"
>          Identifier      "Default Layout"
>          Screen          "Default Screen"
>          InputDevice     "Generic Keyboard"
>          InputDevice     "Configured Mouse"
> EndSection
> 
> I would really appreciate if anyone could give me a clue of what is 
> really the problem and what needs to be fixed.
> 
> Thanks,
> 
> Shan
> 
> 
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> PC Mods, Computing goodies, cases & more
> http://thinkgeek.com/sf
> _______________________________________________
> Dri-users mailing list
> Dri...@li...
> https://lists.sourceforge.net/lists/listinfo/dri-users

__________________________________________________
Do You Yahoo!?
Sign up for SBC Yahoo! Dial - First Month Free
http://sbc.yahoo.com