Menu
▾
▴
[Dri-users] ATI fglrx drivers + kernel 2.6 + Debian Unstable
|
From: Rahul J. <rj...@ny...> - 2003-12-07 22:20:48
|
OK, so I've installed the drivers and all that other fun stuff. The module compiled fine and it loads fine, as far as I can tell. I have merged the config that fglrxconfig makes with the stuff I custom-made. (FWIW, it seems that xtrap with fglrx causes the X server to segfault.) Unfortunately, I can't seem to get DRI to actually initialize. I've tried fiddling with the overlay options to no avail. Here is most of my XF86Config-4: | Section "ServerLayout" | Identifier "XFree86 Configured" | Screen 0 "Screen0" 0 0 | #Screen 1 "Screen1" LeftOf "Screen0" | InputDevice "Mouse0" "CorePointer" | InputDevice "Keyboard0" "CoreKeyboard" | #Option "Xinerama" "True" | Option "AllowDeactivateGrabs" "True" | Option "AllowClosedownGrabs" "True" | EndSection | | Section "Module" | Load "bitmap" | Load "dbe" | Load "ddc" | Load "extmod" | #SubSection "extmod" | # Option "omit xfree86-dga" | #EndSubSection | Load "freetype" | Load "glx" | Load "dri" | Load "record" | Load "speedo" | Load "type1" | #Load "xtrap" | EndSection | | Section "Monitor" | DisplaySize 312 234 | Identifier "Monitor0" | VendorName "Sony" | ModelName "CPD-200GS" | VertRefresh 50-120 | HorizSync 30-85 | Option "DPMS" | EndSection | | Section "Device" | Identifier "Card0" | Driver "fglrx" | # === disable PnP Monitor === | #Option "NoDDC" | # === disable/enable XAA/DRI === | Option "no_accel" "no" | Option "no_dri" "no" | # === FireGL DDX driver module specific settings === | # === Screen Management === | Option "DesktopSetup" "0x00000000" | Option "MonitorLayout" "AUTO, AUTO" | Option "IgnoreEDID" "off" | Option "HSync2" "unspecified" | Option "VRefresh2" "unspecified" | Option "ScreenOverlap" "0" | # === TV-out Management === | Option "NoTV" "yes" | Option "TVStandard" "NTSC-M" | Option "TVHSizeAdj" "0" | Option "TVVSizeAdj" "0" | Option "TVHPosAdj" "0" | Option "TVVPosAdj" "0" | Option "TVHStartAdj" "0" | Option "TVColorAdj" "0" | Option "GammaCorrectionI" "0x00000000" | Option "GammaCorrectionII" "0x00000000" | # === OpenGL specific profiles/settings === | Option "Capabilities" "0x00000800" | # === Video Overlay for the Xv extension === | Option "VideoOverlay" "on" | # === OpenGL Overlay === | # Note: When OpenGL Overlay is enabled, Video Overlay | # will be disabled automatically | Option "OpenGLOverlay" "on" | # === Center Mode (Laptops only) === | Option "CenterMode" "off" | # === Pseudo Color Visuals (8-bit visuals) === | Option "PseudoColorVisuals" "on" | # === QBS Management === | Option "Stereo" "off" | Option "StereoSyncEnable" "1" | # === FSAA Management === | Option "FSAAScale" "4" | Option "FSAADisableGamma" "no" | Option "FSAACustomizeMSPos" "no" | Option "FSAAMSPosX0" "0.000000" | Option "FSAAMSPosY0" "0.000000" | Option "FSAAMSPosX1" "0.000000" | Option "FSAAMSPosY1" "0.000000" | Option "FSAAMSPosX2" "0.000000" | Option "FSAAMSPosY2" "0.000000" | Option "FSAAMSPosX3" "0.000000" | Option "FSAAMSPosY3" "0.000000" | Option "FSAAMSPosX4" "0.000000" | Option "FSAAMSPosY4" "0.000000" | Option "FSAAMSPosX5" "0.000000" | Option "FSAAMSPosY5" "0.000000" | # === Misc Options === | Option "UseFastTLS" "0" | Option "BlockSignalsOnLock" "on" | Option "UseInternalAGPGART" "no" | Option "ForceGenericCPU" "no" | BusID "PCI:1:0:0" # vendor=1002, device=4e44 | Screen 0 | EndSection | | Section "Screen" | Identifier "Screen0" | Device "Card0" | Monitor "Monitor0" | DefaultDepth 24 | SubSection "Display" | Depth 1 | Modes "1152x864" "1024x768" "800x600" "640x480" "400x300" | EndSubSection | SubSection "Display" | Depth 4 | Modes "1152x864" "1024x768" "800x600" "640x480" "400x300" | EndSubSection | SubSection "Display" | Depth 8 | Modes "1152x864" "1024x768" "800x600" "640x480" "400x300" | EndSubSection | SubSection "Display" | Depth 15 | Modes "1152x864" "1024x768" "800x600" "640x480" "400x300" | EndSubSection | SubSection "Display" | Depth 16 | Modes "1152x864" "1024x768" "800x600" "640x480" "400x300" | EndSubSection | SubSection "Display" | Depth 24 | Modes "1152x864" "1024x768" "800x600" "640x480" "400x300" | EndSubSection | EndSection | | Section "dri" | Group 44 # video | Mode 0660 | EndSection Here is some of the output in the X server log: | (II) LoadModule: "glx" | (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a | (II) Module glx: vendor="The XFree86 Project" | compiled for 4.2.1.1, module version = 1.0.0 | ABI class: XFree86 Server Extension, version 0.1 | (II) Loading sub module "GLcore" | (II) LoadModule: "GLcore" | (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a | Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:debug_xform.o": No symbols found | (II) Module GLcore: vendor="The XFree86 Project" | compiled for 4.2.1.1, module version = 1.0.0 | ABI class: XFree86 Server Extension, version 0.1 | (II) Loading extension GLX | (II) LoadModule: "dri" | (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a | (II) Module dri: vendor="The XFree86 Project" | compiled for 4.2.1.1, module version = 1.0.0 | ABI class: XFree86 Server Extension, version 0.1 | (II) Loading sub module "drm" | (II) LoadModule: "drm" | (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a | [...] | (II) Module vgahw: vendor="The XFree86 Project" | compiled for 4.2.1.1, module version = 0.1.0 | ABI class: XFree86 Video Driver, version 0.5 | (II) fglrx(0): PCI bus 1 card 0 func 0 | (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 | (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) | (==) fglrx(0): Default visual is TrueColor | (**) fglrx(0): Option "NoAccel" "no" | (**) fglrx(0): Option "NoDRI" "no" | (**) fglrx(0): Option "Capabilities" "0x00000800" | (**) fglrx(0): Option "GammaCorrectionI" "0x00000000" | (**) fglrx(0): Option "GammaCorrectionII" "0x00000000" | (**) fglrx(0): Option "OpenGLOverlay" "on" | (**) fglrx(0): Option "VideoOverlay" "on" | (**) fglrx(0): Option "DesktopSetup" "0x00000000" | (**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO" | (**) fglrx(0): Option "HSync2" "unspecified" | (**) fglrx(0): Option "VRefresh2" "unspecified" | (**) fglrx(0): Option "ScreenOverlap" "0" | (**) fglrx(0): Option "IgnoreEDID" "off" | (**) fglrx(0): Option "UseInternalAGPGART" "no" | (**) fglrx(0): Option "Stereo" "off" | (**) fglrx(0): Option "StereoSyncEnable" "1" | (**) fglrx(0): Option "UseFastTLS" "0" | (**) fglrx(0): Option "BlockSignalsOnLock" "on" | (**) fglrx(0): Option "ForceGenericCPU" "no" | (**) fglrx(0): Option "CenterMode" "off" | (**) fglrx(0): Option "FSAAScale" "4" | (**) fglrx(0): Option "FSAADisableGamma" "no" | (**) fglrx(0): Option "FSAACustomizeMSPos" "no" | (**) fglrx(0): Option "FSAAMSPosX0" "0.000000" | (**) fglrx(0): Option "FSAAMSPosY0" "0.000000" | (**) fglrx(0): Option "FSAAMSPosX1" "0.000000" | (**) fglrx(0): Option "FSAAMSPosY1" "0.000000" | (**) fglrx(0): Option "FSAAMSPosX2" "0.000000" | (**) fglrx(0): Option "FSAAMSPosY2" "0.000000" | (**) fglrx(0): Option "FSAAMSPosX3" "0.000000" | (**) fglrx(0): Option "FSAAMSPosY3" "0.000000" | (**) fglrx(0): Option "FSAAMSPosX4" "0.000000" | (**) fglrx(0): Option "FSAAMSPosY4" "0.000000" | (**) fglrx(0): Option "FSAAMSPosX5" "0.000000" | (**) fglrx(0): Option "FSAAMSPosY5" "0.000000" | (**) fglrx(0): Option "NoTV" "yes" | (**) fglrx(0): Option "TVStandard" "NTSC-M" | (**) fglrx(0): Option "TVHSizeAdj" "0" | (**) fglrx(0): Option "TVVSizeAdj" "0" | (**) fglrx(0): Option "TVHPosAdj" "0" | (**) fglrx(0): Option "TVVPosAdj" "0" | (**) fglrx(0): Option "TVHStartAdj" "0" | (**) fglrx(0): Option "TVColorAdj" "0" | (**) fglrx(0): Option "PseudoColorVisuals" "on" | (**) fglrx(0): Qbs disabled | (==) fglrx(0): RGB weight 888 | (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) | (**) fglrx(0): Gamma Correction for I is 0x00000000 | (**) fglrx(0): Gamma Correction for II is 0x00000000 | (==) fglrx(0): Buffer Tiling is ON | (II) Loading sub module "int10" | (II) LoadModule: "int10" | (II) Loading /usr/X11R6/lib/modules/linux/libint10.a | (II) Module int10: vendor="The XFree86 Project" | compiled for 4.2.1.1, module version = 1.0.0 | ABI class: XFree86 Video Driver, version 0.5 | (II) fglrx(0): initializing int10 | (II) fglrx(0): Primary V_BIOS segment is: 0xc000 | (--) fglrx(0): Chipset: "ATI R300 ND (R9700 PRO)" (Chipset = 0x4e44) | (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002) | (--) fglrx(0): board vendor info: original ATI grafics adapter | (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 | (--) fglrx(0): MMIO registers at 0xe1000000 | (--) fglrx(0): ChipExtRevID = 0x00 | (--) fglrx(0): ChipIntRevID = 0x02 | (--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM) | (II) fglrx(0): board/chipset is supported by this driver (original ATI board) | [...] | (II) fglrx(0): DesktopSetup 0x0000 | (**) fglrx(0): PseudoColor visuals enabled | (**) fglrx(0): Pseudo Color Vsuals enabled | (**) fglrx(0): OpenGL Overlay enabled | (II) Module ramdac: vendor="The XFree86 Project" | compiled for 4.2.1.1, module version = 0.1.0 | ABI class: XFree86 Video Driver, version 0.5 | (**) fglrx(0): NoAccel = NO | (II) Loading sub module "xaa" | (II) LoadModule: "xaa" | (II) Loading /usr/X11R6/lib/modules/libxaa.a | (II) Module xaa: vendor="The XFree86 Project" | compiled for 4.2.1.1, module version = 1.0.0 | ABI class: XFree86 Video Driver, version 0.5 | (**) fglrx(0): FSAAScale=4 | (**) fglrx(0): FSAA Gamma 140049499 | (**) fglrx(0): FSAA Multisample Position is 140051371 | (**) fglrx(0): NoDRI = NO | (II) Loading sub module "fglrxdrm" | (II) LoadModule: "fglrxdrm" | (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a | (II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany" | compiled for 4.2.0, module version = 3.2.8 | ABI class: XFree86 Server Extension, version 0.1 | (II) fglrx(0): Depth moves disabled by default | (**) fglrx(0): Capabilities: 0x00000800 | (**) fglrx(0): cpuFlags: 0x4000000f | (**) fglrx(0): cpuSpeedMHz: 0x000005b4 | (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" | (**) fglrx(0): using built in AGPGART module: no | (**) fglrx(0): UseFastTLS=0 | (**) fglrx(0): BlockSignalsOnLock=1 | (==) fglrx(0): EnablePrivateBackZ = YES | (II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024] | (--) Depth 24 pixmap format is 32 bpp | (II) do I need RAC? No, I don't. | (II) resource ranges after preInit: | [0] 0 0 0xe1000000 - 0xe100ffff (0x10000) MX[B] | [1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B] | [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) | [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) | [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] | [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] | [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] | [7] -1 0 0xe3404000 - 0xe3404fff (0x1000) MX[B] | [8] -1 0 0xe3403000 - 0xe34030ff (0x100) MX[B] | [9] -1 0 0xe3401000 - 0xe34010ff (0x100) MX[B] | [10] -1 0 0xe3400000 - 0xe3400fff (0x1000) MX[B] | [11] -1 0 0xe3402000 - 0xe3402fff (0x1000) MX[B] | [12] -1 0 0xe3000000 - 0xe33fffff (0x400000) MX[B] | [13] -1 0 0xe1010000 - 0xe101ffff (0x10000) MX[B](B) | [14] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) | [15] -1 0 0xe1000000 - 0xe100ffff (0x10000) MX[B](B) | [16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) | [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] | [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] | [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] | [20] 0 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] | [21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] | [22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] | [23] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B] | [24] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B] | [25] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] | [26] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] | [27] -1 0 0x00004000 - 0x0000400f (0x10) IX[B] | [28] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B) | [29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] | [30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] | (II) fglrx(0): UMM area: 0xd05cc000 (size=0x07a34000) | (II) fglrx(0): driver needs XFree86 version: 4.2.x | (II) fglrx(0): detected XFree86 version: 4.2.1 | (II) Loading extension ATIFGLRXDRI | (II) fglrx(0): doing DRIScreenInit | drmOpenDevice: minor is 0 | drmOpenDevice: node name is /dev/dri/card0 | drmOpenDevice: open result is 5, (OK) | drmOpenDevice: minor is 0 | drmOpenDevice: node name is /dev/dri/card0 | drmOpenDevice: open result is 5, (OK) | drmOpenDevice: minor is 0 | drmOpenDevice: node name is /dev/dri/card0 | drmOpenDevice: open result is 5, (OK) | drmOpenDevice: minor is 1 | drmOpenDevice: node name is /dev/dri/card1 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 2 | drmOpenDevice: node name is /dev/dri/card2 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 3 | drmOpenDevice: node name is /dev/dri/card3 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 4 | drmOpenDevice: node name is /dev/dri/card4 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 5 | drmOpenDevice: node name is /dev/dri/card5 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 6 | drmOpenDevice: node name is /dev/dri/card6 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 7 | drmOpenDevice: node name is /dev/dri/card7 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 8 | drmOpenDevice: node name is /dev/dri/card8 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 9 | drmOpenDevice: node name is /dev/dri/card9 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 10 | drmOpenDevice: node name is /dev/dri/card10 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 11 | drmOpenDevice: node name is /dev/dri/card11 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 12 | drmOpenDevice: node name is /dev/dri/card12 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 13 | drmOpenDevice: node name is /dev/dri/card13 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | drmOpenDevice: minor is 14 | drmOpenDevice: node name is /dev/dri/card14 | drmOpenDevice: open result is -1, (No such device) | drmOpenDevice: Open failed | (II) fglrx(0): [drm] drmOpen failed | (EE) fglrx(0): DRIScreenInit failed! | (WW) fglrx(0): *********************************************** | (WW) fglrx(0): * DRI initialization failed! * | (WW) fglrx(0): * (maybe driver kernel module missing or bad) * | (WW) fglrx(0): * 2D acceleraton available (MMIO) * | (WW) fglrx(0): * no 3D acceleration available * | (WW) fglrx(0): ********************************************* * | (II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x08000000 | (==) fglrx(0): Write-combining range (0xd0000000,0x8000000) | (II) fglrx(0): FBMM initialized for area (0,0)-(1152,8191) | (II) fglrx(0): FBMM auto alloc for area (0,0)-(1152,864) (front color buffer - assumption) | (==) fglrx(0): Backing store disabled | (==) fglrx(0): Silken mouse enabled | (II) fglrx(0): Using hardware cursor (scanline 864) | (II) fglrx(0): Largest offscreen area available: 1152 x 7326 | (**) Option "dpms" | (**) fglrx(0): DPMS enabled | (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) | Screen to screen bit blits | Solid filled rectangles | Solid Horizontal and Vertical Lines | Offscreen Pixmaps | Setting up tile and stipple cache: | 32 128x128 slots | 32 256x256 slots | 16 512x512 slots | (II) fglrx(0): Acceleration enabled | (II) fglrx(0): Direct rendering disabled Any assistance or advice is appreciated. TIA. -- Rahul Jain |