From: Keith G. <gr...@ma...> - 2003-01-05 23:23:35
|
Sorry, I should have refreshed my in box before writting this. I see tha= t you=20 already saw the faq entry. Perhaps the config will be helpful any way. = I=20 know I had trouble with black screens until I forced PCI mode. On Sunday 05 January 2003 05:16 pm, Keith Gross wrote: > I've attached my XF86Config. The most important line is in device sect= ion > and forces the driver into PCI mode. > > Option "ForcePCIMode" "true" > > One thing to note is that you will most likely need to disable dri by > uncommenting the option line in the device section that says nodri. Thi= s is > because XFree 4.2.1 doesn't support dri and 3D acceleration for PCI Rad= eons > on X86. I'm using a hacked version of the DRI from CVS. If you check = in > the faq section on the DRI home page there are instructions for setting= up > dri for PCI Radeons. You should get your Radeon working for 2D using t= he > stock install before trying to use the hack to get #d. > > Section "ServerLayout" > =09Identifier "XFree86 Configured" > =09Screen 0 "Screen0" 0 0 > =09InputDevice "Mouse0" "CorePointer" > =09InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > =09RgbPath "/usr/X11R6/lib/X11/rgb" > =09ModulePath "/usr/X11R6/lib/modules" > =09FontPath "/usr/X11R6/lib/X11/fonts/misc/" > =09FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > =09FontPath "/usr/X11R6/lib/X11/fonts/TTF" > =09FontPath "/usr/X11R6/lib/X11/fonts/truetype" > =09FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > =09FontPath "/usr/X11R6/lib/X11/fonts/CID/" > =09FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > =09FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > EndSection > > Section "Module" > =09SubSection "extmod" > =09# option "omit xfree86-dga" > =09EndSubSection > =09Load "xie" > =09Load "pex5" > =09Load "glx" > =09Load "dri" > =09Load "dbe" > =09Load "i2c" > =09Load "ddc" > =09Load "record" > =09Load "xtrap" > =09Load "speedo" > =09Load "type1" > EndSection > > Section "InputDevice" > =09Identifier "Keyboard0" > =09Driver "keyboard" > EndSection > > Section "InputDevice" > =09Identifier "Mouse0" > =09Driver "mouse" > =09Option=09 "Protocol" "IMPS/2" > =09Option=09 "Device" "/dev/mouse" > =09Option "ZAxisMapping" "4 5" > EndSection > > Section "Modes" > =09Identifier "MagModes" > =09Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 10= 66 > +hsync +vsync > =09Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -= hsync > -vsync > =09Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsy= nc > +vsync Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 > -hsync -vsync Modeline "1280x960" 108.00 1280 1376 1488 1800 960 96= 1 > 964 1000 +hsync +vsync > =09Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -= hsync > -vsync > =09Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doub= lescan > +hsync +vsync > =09Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doubl= escan > +hsync +vsync > =09Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doubl= escan > +hsync +vsync > =09Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doubl= escan > +hsync +vsync > =09Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doubl= escan > -hsync -vsync > =09Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doubl= escan > -hsync -vsync > =09Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doubl= escan > +hsync +vsync > =09Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doubl= escan > -hsync -vsync > EndSection > > Section "Monitor" > =09DisplaySize=09 337 270=09# mm > =09Identifier "Monitor0" > =09VendorName "Mag" > =09#ModelName "1765" > =09HorizSync=0931.0-80.0 > =09VertRefresh=0960.0-70.0 > UseModes=09"MagModes" > =09Option=09 "DPMS" > EndSection > > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg]: arg optional > #Option "accel" =09# [<bool>] > #Option "crt_screen" =09# [<bool>] > #Option "composite_sync" =09# [<bool>] > #Option "hw_cursor" =09# [<bool>] > #Option "linear" =09# [<bool>] > #Option "mmio_cache" =09# [<bool>] > #Option "probe_clocks" =09# [<bool>] > #Option "reference_clock" =09# <freq> > #Option "shadow_fb" =09# [<bool>] > #Option "sw_cursor" =09# [<bool>] > Option "ForcePCIMode" "true" > =09Identifier "AtiRadeon" > =09Driver "radeon" > =09VendorName "ATI" > =09BusID "PCI:0:18:0" > =09#option "nodri" > =09VideoRam 32768 > EndSection > > #Section "Device" > #=09Identifier "onboard" > # Driver "ati" > # VendorName "ATI" > # BusID "PCI:1:0:0" > #EndSection > > Section "Device" > =09Identifier "Vesa" > =09Driver "vesa" > EndSection > > Section "Screen" > =09Identifier "Screen0" > =09Device "AtiRadeon" > =09Monitor "Monitor0" > =09DefaultDepth=0924 > =09SubSection "Display" > =09=09Depth 24 > =09=09Modes "1280x1024" "1024x768" "800x600" "640x480" "720x400" > =09EndSubSection > EndSection > > Section "DRI" > =09mode 0666 > EndSection > > On Sunday 05 January 2003 08:58 pm, Yarema Prykarpatskyy wrote: > > Hi, > > I have Mandrake9.0 with XFree86 4.21. All my attempts to get work vi= deo > > card Radeon 7000 PCI was unsuccessful. If you have some suggestion ho= w > > to get work it please help! Or maybe someone has radeon.o works prope= rly > > with my configuration? > > Thanks in advance for help, > > > > Y. > > > > > > > > ------------------------------------------------------- > > This sf.net email is sponsored by:ThinkGeek > > Welcome to geek heaven. > > http://thinkgeek.com/sf > > _______________________________________________ > > Dri-users mailing list > > Dri...@li... > > https://lists.sourceforge.net/lists/listinfo/dri-users > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > Dri-users mailing list > Dri...@li... > https://lists.sourceforge.net/lists/listinfo/dri-users |