From: Sandro T. <tek...@li...> - 2008-10-21 07:56:11
|
Hi to all, just begin to play with DL. I'm not a module expert but I think I've found a bug in the e100 module loading (Intel ethernet card or on board card for laptops, for example Thinkpad) in the development version 1.3.6-2008-08-12 for i586 CPUs. I installed DL on a USB key and everything went fine. In the setup procedure I set up the e100 module but when I tried to get an IP from the lan dhcp server I've got a fault, due to something wrong in the file /etc/dhclient.conf (btw, there is also some garbage in this file, like reference to 'andare.fugue.com', 'home.vix.com' and 'andare.swiftmedia.com'): line 14 ---> script "/etc/dhclient-script"; while this script file is located in /sbin Quick workaround in 3 steps to let the network run: 1. ifconfig eth1 up 2. cp /sbin/dhclient-script /etc 3. sudo dhclient eth1 Remeber to save-config after these steps, so next time you boot you have only to do steps 1 and 3. At the moment I didn't try to automatize this at boot time, because this won't be my final hw architecture. Regards Sandro = $99 Professional Custom Logo Design 3 High Quality Logo Concepts with free Unlimited Revisions. http://a8-asy.a8ww.net/a8-ads/adftrclick?redirectid=eb058bcd7d8fae8300d5dad6199f6a51 -- Powered by Outblaze |