Re: [coLinux-users] Networking inop

[Douglas P. <do...@in...>]

I'm almost there, I can ping from Linux to the TAP IP address but not 
out to the internet.

Could you please tell me what your IP's on both windows interfaces are 
and what the IP on your Linux side is?  Also the default gateway on both 
linux and windows?

Also, is there a Debian (Knoppix) commandline program for altering the 
network IP/netmask/dns/default gateway?  If not how do you set default 
gateway and IP?


Thanks (Almost there)

Doug P

Sam Moffatt wrote:
> Setup the tap device to have a static address matching the settings
> you have under colinux - with a different ip of course - and it should
> work perfectly after that point.
> 
> 
> On Wed, 02 Feb 2005 22:36:17 -0800, Douglas Phillipson
> <do...@in...> wrote:
> 
>>I just installed colonix/colinux with Knoppix 3.7 instead of 3.6.  I got
>>no errors this time but networking still isn't working.  I could use
>>some pointers...
>>
>>Thanks
>>
>>Doug P
>>
>>Sam Moffatt wrote:
>>
>>>colinux doesn't set up the network connection; i'm not sure about
>>>colonist, I haven't had time to play with it. i suggest that you
>>>reconfigure the windows lan device and then check the linux side of
>>>things.
>>>
>>>as for service, colinux-daemon --install-service should do the trick
>>>
>>>On Wed, 02 Feb 2005 21:54:00 -0800, Douglas Phillipson
>>><do...@in...> wrote:
>>>
>>>
>>>>Sam Moffatt wrote:
>>>>
>>>>
>>>>>Did you install the TAP device properly? Or check that it is actually
>>>>>install properly. Should appear as another lan device.
>>>>>
>>>>>
>>>>>On Wed, 02 Feb 2005 20:46:08 -0800, Douglas Phillipson
>>>>><do...@in...> wrote:
>>>>>
>>>>>
>>>>>
>>>>>>I'm using colinux 0.6.2 and colonist 0.9.1.  The install went smooth
>>>>>>with Knopix 3.6 but networking appears to be dead.
>>>>>>
>>>>>>What daemons should be running in the windows task manager with
>>>>>>colinux/Colonist?  I have:
>>>>>>
>>>>>>colinux-daemon
>>>>>>colinux-net-daemon
>>>>>>colinux-console
>>>>>>
>>>>>>Networking is not working.  My colinux/colonist vm is on 172.17.18.19
>>>>>>but there is no route to the W2k OS.
>>>>>>
>>>>>>Where is the xml file that configures networking.  I don't think
>>>>>>networking is working between colinux and w2k.  How does one
>>>>>>troubleshoot this?
>>>>>>
>>>>>>Thanks for a great piece of software! (Once I get it running)
>>>>>>
>>>>>>Doug P
>>>>>>
>>>>
>>>>Was the Colonix installation supposed to configure all the networking
>>>>automatically?
>>>>
>>>>Doug P
>>>>
>>>
> 
>