Re: [Cdrdao-devel] cdrdao OK under Linux, not Win32

[Andreas M. <an...@da...>]

Hi Mark, wrote:
> I have an HP 9150i CD-writer. Under Linux, cdrdao finds it with no problem. With the Windows port, under Win2000, I solved the initial "scanbus execution failed" error by installing the Adaptec ASPI layer. However, 'cdrdao scanbus' now completes without error but without finding the drive.
> 
> Any suggestions on where to go from here? The drive is connected to /dev/hdd (slave of secondary IDE).

That's strange. Maybe the ASPI layer does not work with the W2K 
architecture anymore. If onyl the device scanning is affected you
may try out some bus/id/lun combinations directly
(option --device bus,id,lun).  'bus' should be in the range 0-2 (if
you also have a SCSI adaptor you may increase the upper range),
'id' should be 0 or 1 and 'lun' is always 0.

If this still does not work please try to contact some W2K user over
the various newsgroups. Maybe they can give you some hint how to
activate the ASPI layer. 

If someone can implement a direct SCSI access method avoiding the
ASPI layer please let me know.
 
Regards,
Andreas
-- 
Andreas Mueller                  Tel: +49 89 67808848
Ramsmeierstr. 1                Email: an...@da...
85579 Neubiberg, Germany