RE: [Bayonne-dialogic] Dynamic Protocol Detection under Global Ca ll

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

What are the proper names P_xxx names for CAS and other non-isdn 
t1 span card protocols?  I am right now building up a globalcall config 
system on top of the current driver...

On Mon, 28 Oct 2002, Gilmore, Gerry wrote:

> 
> 	Range of network device names, are they always going to be
> 	N_dtiBxCy ?  What are other possibilities.
> 
> For all digital (T1/E1) cards, the network device name (:N_ parameter) is
> always of the form: dtiBxTy where 'x' is the span number and 'y' is either
> 23,24 or 30, depending on whether it's T1 or E1 and CAS or ISDN. Actually,
> you can use the ATDV_SUBDEVS() function to get the 24 vs. 30 info. for each
> board.
> 
> For analog, it's a bit funny in that the network device name is listed by
> the :V_ parameter. So, for example, a single 4-port system fro North
> American analog protocol would pass (:V_dxxxB1C1:P_na_an_io) to gc_Open().
> 
> 
> 	Number of device ports/timeslots that need to be opened for a 
> 	"span" by a protocol name
> For T1 CAS, it's 24. For T1 ISDN, it's 23. For E1, it's 30.
> 
> Gerry
> 
> Gerry Gilmore
> Field Applications Engineer
> Intel Corporation
> Intel Communication Sales Organization 
> phone: 770-619-5909 x105
> fax: 770-619-5889
> email: Ger...@in...
> http://www.intel.com
> 
> 
> 
> -----Original Message-----
> From: David Sugar [mailto:dy...@os...]
> Sent: Monday, October 28, 2002 2:12 PM
> To: Gilmore, Gerry
> Cc: Sean Bruno - TELECOM; bay...@li...
> Subject: RE: [Bayonne-dialogic] Dynamic Protocol Detection under Global
> Ca ll
> 
> 
> 
> As soon as I can get some verification that the current driver works, I 
> think I will try to do a programmable config file.  Here is what I need to
> know:
> 
> 	Range of network device names, are they always going to be
> 	N_dtiBxCy ?  What are other possibilities.
> 
> 	Number of device ports/timeslots that need to be opened for a 
> 	"span" by a protocol name
> 
> In addition, I may need to define a span "type", at least for digital span 
> cards, since they can be E1, T1, or even BRI based spans, and that is not
> clear from the network protocol string alone.
> 
> On Mon, 28 Oct 2002, Gilmore, Gerry wrote:
> 
> > You're right, David....There's no good, rock-solid way to auto-detect. The
> > best way is to use a config file which would include:
> > 
> > Network device name (such as dtiB1T1)
> > Protocol string (as used by gc_Open)
> > Voice Resource device name (if needed by protocol - CAS and analog,
> > specifically)
> > 
> > To keep the config file length manageable, you *could* use the board-level
> > device name (such as dtiB1), protocol, etc., since you'll almost always be
> > using the same protocol on all channels of a board (logical span,
> actually).
> > 
> > Gerry
> > 
> > 
> > Gerry Gilmore
> > Field Applications Engineer
> > Intel Corporation
> > Intel Communication Sales Organization 
> > phone: 770-619-5909 x105
> > fax: 770-619-5889
> > email: Ger...@in...
> > http://www.intel.com
> > 
> > 
> > 
> > -----Original Message-----
> > From: David Sugar [mailto:dy...@os...]
> > Sent: Monday, October 28, 2002 1:48 PM
> > To: Sean Bruno - TELECOM
> > Cc: Gerry Gilmore; bay...@li...
> > Subject: Re: [Bayonne-dialogic] Dynamic Protocol Detection under Global
> > Call
> > 
> > 
> > 
> > We could move this stuff into the config file and in fact, I want to, 
> > since Mark originally hardcoded the configuration.  However, I do not know
> 
> > of any way we can do a complete auto-detect.
> > 
> > On 28 Oct 2002, Sean Bruno - TELECOM wrote:
> > 
> > > Is there an accepted method for "auto" detecting what procol the machine
> > > is set up to use so that the gc_open(); doesn't have the protocol
> > > "hardcoded" into it?
> > > 
> > > example:
> > >   sprintf(devmap[i].devname, ":N_dtiB1T%d:P_ISDN", i + 1);
> > >   sprintf(devmap[i].voicedev, "dxxxB%dC%d", card, vox);
> > >   slog(Slog::levelDebug) << "opening " << devmap[i].devname << ",
> > > suggesting " << devmap[i].voicedev << "for vox" << endl;
> > >   if(gc_OpenEx(&devmap[i].linedev, devmap[i].devname, EV_SYNC,
> > > 
> > > Can we pull the protocol "P_ISDN" out of a config file or something?
> > > 
> > > On Mon, 2002-10-28 at 06:28, Gilmore, Gerry wrote:
> > > > You apparently have specified the board-level device "dxxxB1" rather
> > than
> > > > the channel-level device "dxxxB1C1" (or dxxxB1C2, etc.)
> > > > 
> > > > 
> > > > Gerry Gilmore
> > > > Field Applications Engineer
> > > > Intel Corporation
> > > > Intel Communication Sales Organization 
> > > > phone: 770-619-5909 x105
> > > > fax: 770-619-5889
> > > > email: Ger...@in...
> > > > http://www.intel.com
> > > > 
> > > > 
> > > > 
> > > > -----Original Message-----
> > > > From: Rogier Mars [mailto:ro...@xs...]
> > > > Sent: Sunday, October 27, 2002 6:26 PM
> > > > To: bay...@li...
> > > > Cc: ro...@fo...
> > > > Subject: [Bayonne-dialogic] dialogic d21/d card failed to go onhook
> > > > 
> > > > 
> > > > Hi,
> > > > 
> > > > I've been using your list to configure the dialogic driver for linux
> and
> > the
> > > > bayonne package. after some trouble with the driver hanging the system
> > > > (which seems to have been caused by irq conflicts), the driver looks
> > okay
> > > > now.
> > > > 
> > > > only when I start a demo program, I get an error message:
> > > > ------------------------------------
> > > > D/xxx Customer Service Demonstration Program Version 97.08
> > > > Copyright (c) 1988-1997 Dialogic Corporation
> > > > ALL RIGHTS RESERVED
> > > > WARNING: sr_putstop: dxxxB1 not ready for command!
> > > > ./custserv: dxxxB1 now in use
> > > > ./custserv: using dxxxB1 failed to go onhook.
> > > > Interrupted system call
> > > > ------------------------------------
> > > > 
> > > > Is this a hardware problem or is this a misconfiguration?
> > > > I've seen one document on the internet that had some info about this
> > > > message, and it said to increase the timeout from 1 to 10 seconds,
> only
> > it
> > > > did not state what timeout or in which file that was.
> > > > 
> > > > Is there anyone that has had the same error message, and knows a
> > solution?
> > > > 
> > > > thanks,
> > > > 
> > > > rogier
> > > > 
> > > > 
> > > > I've included configuration data below:
> > > > 
> > > > ------------------------------------
> > > > 
> > > > ###################################
> > > > # #
> > > > # DIALOGIC CONFIGURATION FILE #
> > > > # #
> > > > ###################################
> > > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > > [Genload - All Boards]
> > > > LogFile=genload.log
> > > > D41DAddress = D0000
> > > > BusType=None
> > > > PCMEncoding=ULAW
> > > > [Genload - Address D0000] /* D/XXD */
> > > > PCMEncoding=ULAW
> > > > ----------------------------------------------------
> > > > .sbairq
> > > > 6
> > > > ----------------------------------------------------
> > > > .mastercfg
> > > > 00200 vox sram 1 2
> > > > 00201 ant an 1 0
> > > > ----------------------------------------------------
> > > > /proc/interrupts
> > > > CPU0
> > > > 0: 12826 XT-PIC timer
> > > > 1: 676 XT-PIC keyboard
> > > > 2: 0 XT-PIC cascade
> > > > 11: 0 XT-PIC eth0
> > > > 14: 1345 XT-PIC ide0
> > > > 15: 5 XT-PIC ide1
> > > > NMI: 0
> > > > LOC: 0
> > > > ERR: 0
> > > > MIS: 0
> > > > ----------------------------------------------------
> > > > /proc/ioports
> > > > 0000-001f : dma1
> > > > 0020-003f : pic1
> > > > 0040-005f : timer
> > > > 0060-006f : keyboard
> > > > 0080-008f : dma page reg
> > > > 00a0-00bf : pic2
> > > > 00c0-00df : dma2
> > > > 00f0-00ff : fpu
> > > > 0170-0177 : ide1
> > > > 01f0-01f7 : ide0
> > > > 02f8-02ff : serial(set)
> > > > 0376-0376 : ide1
> > > > 03c0-03df : vga+
> > > > 03f6-03f6 : ide0
> > > > 03f8-03ff : serial(set)
> > > > 0cf8-0cff : PCI conf1
> > > > 6000-600f : VIA Technologies, Inc. Bus Master IDE
> > > > 6000-6007 : ide0
> > > > 6008-600f : ide1
> > > > 6200-621f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
> > > > 6200-621f : ne2k-pci
> > > > ----------------------------------------------------
> > > > /proc/iomem
> > > > 00000000-0009ffff : System RAM
> > > > 000a0000-000bffff : Video RAM area
> > > > 000c0000-000c7fff : Video ROM
> > > > 000f0000-000fffff : System ROM
> > > > 00100000-03ffffff : System RAM
> > > > 00100000-002268a5 : Kernel code
> > > > 002268a6-002a221f : Kernel data
> > > > e0000000-e07fffff : Matrox Graphics, Inc. MGA 2064W [Millennium]
> > > > e0800000-e0803fff : Matrox Graphics, Inc. MGA 2064W [Millennium]
> > > > ffff0000-ffffffff : reserved
> > > > ----------------------------------------------------
> > > > Starting ORB Event Server:
> > > > Starting Orbacus4 nameserv:
> > > > ----------------------------------------------------
> > > > Warning: loading /lib/modules/2.4.19/misc/streams-dlgnDriver.o will
> > taint
> > > > the kernel: no license
> > > > Warning: loading /lib/modules/2.4.19/misc/streams-dlgnDriver.o will
> > taint
> > > > the kernel: forced load
> > > > Using /lib/modules/2.4.19/misc/streams-dlgnDriver.o
> > > > Warning: kernel-module version mismatch
> > > > /lib/modules/2.4.19/misc/streams-dlgnDriver.o was compiled for kernel
> > > > version 2.4.9-12
> > > > while this kernel is version 2.4.19
> > > > Warning: loading /lib/modules/2.4.19/misc/streams-gncfdDriver.o will
> > taint
> > > > the kernel: no license
> > > > Warning: loading /lib/modules/2.4.19/misc/streams-gncfdDriver.o will
> > taint
> > > > the kernel: forced load
> > > > Using /lib/modules/2.4.19/misc/streams-gncfdDriver.o
> > > > Warning: kernel-module version mismatch
> > > > /lib/modules/2.4.19/misc/streams-gncfdDriver.o was compiled for kernel
> > > > version 2.4.9-12
> > > > while this kernel is version 2.4.19
> > > > Warning: loading /lib/modules/2.4.19/misc/streams-gpioDriver.o will
> > taint
> > > > the kernel: no license
> > > > Warning: loading /lib/modules/2.4.19/misc/streams-gpioDriver.o will
> > taint
> > > > the kernel: forced load
> > > > Using /lib/modules/2.4.19/misc/streams-gpioDriver.o
> > > > Warning: kernel-module version mismatch
> > > > /lib/modules/2.4.19/misc/streams-gpioDriver.o was compiled for kernel
> > > > version 2.4.9-12
> > > > while this kernel is version 2.4.19
> > > > Warning: loading /lib/modules/2.4.19/misc/streams-sctmrDriver.o will
> > taint
> > > > the kernel: no license
> > > > Warning: loading /lib/modules/2.4.19/misc/streams-sctmrDriver.o will
> > taint
> > > > the kernel: forced load
> > > > Using /lib/modules/2.4.19/misc/streams-sctmrDriver.o
> > > > Warning: kernel-module version mismatch
> > > > /lib/modules/2.4.19/misc/streams-sctmrDriver.o was compiled for kernel
> > > > version 2.4.9-12
> > > > while this kernel is version 2.4.19
> > > > Warning: loading /lib/modules/2.4.19/misc/streams-dvbmDriver.o will
> > taint
> > > > the kernel: no license
> > > > Warning: loading /lib/modules/2.4.19/misc/streams-dvbmDriver.o will
> > taint
> > > > the kernel: forced load
> > > > Using /lib/modules/2.4.19/misc/streams-dvbmDriver.o
> > > > Warning: kernel-module version mismatch
> > > > /lib/modules/2.4.19/misc/streams-dvbmDriver.o was compiled for kernel
> > > > version 2.4.9-12
> > > > while this kernel is version 2.4.19
> > > > Dialogic Generic Downloader Version 5.10 (Build 12)
> > > > Copyright (c) 1992-2000 by Dialogic Corp.
> > > > Using /usr/dialogic/cfg/dialogic.cfg to configure Dialogic Boards
> > > > System Download ............................................
> > > > D/21D (addr D000) Download .. d4x Firmware Version 6.53 Build
> 0028.0002
> > > > 1 Dialogic Board Successfully Installed
> > > > Dialogic NFAS Configuration Program
> > > > Version 2.0
> > > > Linux 2.x.x
> > > > Copyright (c) 2001 Intel Corp.
> > > > ALL RIGHTS RESERVED
> > > > Add SW Devices ....
> > > > REGVOX: #
> > > > REGVOX: # Dialogic Generic Configuration File
> > > > REGVOX: #
> > > > REGVOX: #
> > > > REGVOX: # Total number of virtual boards - 1
> > > > REGVOX: #
> > > > REGVOX:
> > > > REGVOX: #
> > > > REGVOX: # Board Type - D/21D
> > > > REGVOX: #
> > > > REGVOX: dxxxB1 2 1 C D0000 2000 0 D4X 3
> > > > Add SW Devices Done
> > > > Dialogic SCSA Transmit Timeslot Assignment Program
> > > > Version 2.0
> > > > Linux 2.x.x
> > > > Copyright (C) 1997-2000 Dialogic Corp.
> > > > ALL RIGHTS RESERVED
> > > > ----------------------------------------------------
> > > > lsmod
> > > > Module Size Used by Tainted: PF
> > > > streams-dvbmDriver 126912 0 (unused)
> > > > streams-sctmrDriver 25888 0 (unused)
> > > > streams-gpioDriver 9644 0
> > > > streams-gncfdDriver 11936 1
> > > > streams-dlgnDriver 462704 0 [streams-dvbmDriver streams-sctmrDriver
> > > > streams-gpioDriver streams-gncfdDriver]
> > > > streams 501696 0 [streams-dvbmDriver streams-sctmrDriver
> > streams-gpioDriver
> > > > streams-gncfdDriver streams-dlgnDriver]
> > > > ne2k-pci 4768 1
> > > > 8390 6320 0 [ne2k-pci]
> > > > ----------------------------------------------------
> > > > CPU0
> > > > 0: 28066 XT-PIC timer
> > > > 1: 1498 XT-PIC keyboard
> > > > 2: 0 XT-PIC cascade
> > > > 6: 2 XT-PIC dlgnsba
> > > > 11: 6 XT-PIC eth0
> > > > 14: 2506 XT-PIC ide0
> > > > 15: 5 XT-PIC ide1
> > > > NMI: 0
> > > > LOC: 0
> > > > ERR: 0
> > > > MIS: 0
> > > > ----------------------------------------------------
> > > > 0000-001f : dma1
> > > > 0020-003f : pic1
> > > > 0040-005f : timer
> > > > 0060-006f : keyboard
> > > > 0080-008f : dma page reg
> > > > 00a0-00bf : pic2
> > > > 00c0-00df : dma2
> > > > 00f0-00ff : fpu
> > > > 0170-0177 : ide1
> > > > 01f0-01f7 : ide0
> > > > 02f8-02ff : serial(set)
> > > > 0376-0376 : ide1
> > > > 03c0-03df : vga+
> > > > 03f6-03f6 : ide0
> > > > 03f8-03ff : serial(set)
> > > > 0cf8-0cff : PCI conf1
> > > > 6000-600f : VIA Technologies, Inc. Bus Master IDE
> > > > 6000-6007 : ide0
> > > > 6008-600f : ide1
> > > > 6200-621f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
> > > > 6200-621f : ne2k-pci
> > > > ----------------------------------------------------
> > > > 00000000-0009ffff : System RAM
> > > > 000a0000-000bffff : Video RAM area
> > > > 000c0000-000c7fff : Video ROM
> > > > 000f0000-000fffff : System ROM
> > > > 00100000-03ffffff : System RAM
> > > > 00100000-002268a5 : Kernel code
> > > > 002268a6-002a221f : Kernel data
> > > > e0000000-e07fffff : Matrox Graphics, Inc. MGA 2064W [Millennium]
> > > > e0800000-e0803fff : Matrox Graphics, Inc. MGA 2064W [Millennium]
> > > > ffff0000-ffffffff : reserved
> > > > ----------------------------------------------------
> > > > D/xxx Customer Service Demonstration Program Version 97.08
> > > > Copyright (c) 1988-1997 Dialogic Corporation
> > > > ALL RIGHTS RESERVED
> > > > WARNING: sr_putstop: dxxxB1 not ready for command!
> > > > ./custserv: dxxxB1 now in use
> > > > ./custserv: using dxxxB1 failed to go onhook.
> > > > Interrupted system call
> > > > 
> > > > 
> > > > 
> > > > -------------------------------------------------------
> > > > This SF.net email is sponsored by: ApacheCon, November 18-21 in
> > > > Las Vegas (supported by COMDEX), the only Apache event to be
> > > > fully supported by the ASF. http://www.apachecon.com
> > > > _______________________________________________
> > > > Bayonne-dialogic mailing list
> > > > Bay...@li...
> > > > https://lists.sourceforge.net/lists/listinfo/bayonne-dialogic
> > > > 
> > > > 
> > > > -------------------------------------------------------
> > > > This sf.net email is sponsored by:ThinkGeek
> > > > Welcome to geek heaven.
> > > > http://thinkgeek.com/sf
> > > > _______________________________________________
> > > > Bayonne-dialogic mailing list
> > > > Bay...@li...
> > > > https://lists.sourceforge.net/lists/listinfo/bayonne-dialogic
> > > 
> > 
> 