From: Dan L. <da...@la...> - 2003-05-13 15:16:56
|
On 13 May 2003 at 17:01, Kern Sibbald wrote: > Hello Dan, > > I think I have found some problems that I introduced when > I made the code try reading a drive with the automount > feature so that users could pre-mount tapes and they would > just be used. They show up only when there is a problem with > the requested volume (i.e. it has expired or something). > This may or may not be related to your errors (I think so). > > I've implemented the fixes and it passes my regression tests > (which doesn't mean too much in this case), but I don't > have time to specific testing until tomorrow. > > If you are interested in testing, > please download what is currently in the CVS and try > it. I'll download that now and try it. > Please be aware, this is "unstable" code (IMO), and the > daemons are not compatible with version 1.30, so you > should run it only in a test environment. Understood. I have only one box using Bacula at the moment. > Any feedback would be welcome. I hope to have something with an hour. FWIW: I've found that one tape is causing problems. Consistently, regardless of slot, I can produce this error with this tape: # /usr/local/sbin/mtx -f /dev/pass1 load 1 mtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request Sense: Error Code=70 (Current) mtx: Request Sense: Sense Key=Hardware Error mtx: Request Sense: FileMark=no mtx: Request Sense: EOM=no mtx: Request Sense: ILI=no mtx: Request Sense: Additional Sense Code = 44 mtx: Request Sense: Additional Sense Qualifier = AF mtx: Request Sense: BPV=yes mtx: Request Sense: Error in CDB=no mtx: Request Sense: SKSV=no mtx: Request Sense: Field Pointer = 00 00 MOVE MEDIUM from Element Address 2 to 1 Failed -- Dan Langille : http://www.langille.org/ |