[Bacula-users] 3999 Device "/dev/changer" not found or could not be opened.

[Marchon . <ema...@gm...>]

Hi,

Really really need help

When running bconsole to mount or label the following error occurs.
------# bconsoleConnecting to Director abnspsrv05:91011000 OK: abnspsrv05.cnh-boavista.abnot Version: 5.2.6 (21 February 2012)Enter a period to cancel a command.*mountAutomatically selected Catalog: MyCatalogUsing Catalog "MyCatalog"The defined Storage resources are:     1: File     2: AutochangerSelect Storage resource (1-2): 2Connecting to Storage daemon Autochanger at abnspsrv05:9103 ...3999 Device "/dev/changer" not found or could not be opened.Enter autochanger drive[0]: 1Enter autochanger slot: 13999 Device "/dev/changer" not found or could not be opened.------
My TapeLibrary is a Dell TL4000 with two drive.

I did the tests using the mtx-changer and btape successfully. But when I run the error occurs bconsole noted above.

To help in the diagnosis following configuration files.
---bacula-sd.conf---Autochanger {  Name = Autochanger  Device = Drive-1  Device = Drive-2  Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"  Changer Device = /dev/changer}Device {  Name = Drive-1                      #  Drive Index = 0  Media Type = LTO-4  Archive Device = /dev/nst0  AutomaticMount = yes;               # when device opened, read it  AlwaysOpen = yes;  RemovableMedia = yes;  RandomAccess = no;  AutoChanger = yesDevice {  Name = Drive-2                      #  Drive Index = 1  Media Type = LTO-4  Archive Device = /dev/nst1  AutomaticMount = yes;               # when device opened, read it  AlwaysOpen = yes;  RemovableMedia = yes;  RandomAccess = no;  AutoChanger = yes
---END---
---bacula-dir.conf session Storage--- 
Storage {  Name = Autochanger#  Do not use "localhost" here  Address = abnspsrv05                # N.B. Use a fully qualified name here  SDPort = 9103  Password = "*****************************"          # password for Storage daemon  Device = /dev/changer                      # must be same as Device in Storage daemon  Media Type = LTO-4                  # must be same as MediaType in Storage daemon  Autochanger = yes                   # enable for autochanger device}---END---
Best regards
______________________________________
Ema Iron Head