Re: [Bacula-users] bacula-fd on winserver 2010

[Jeremiah D. J. <jjest@u.washington.edu>]

Problem resolved.

The bacula-sd dns entry was not being recognized by the client. pine (the bacula-fd client) is using separate DNS servers. I changed the the bacula-sd address to the IP address and all works now.

Thanks for  all the help!

JJ

-----Original Message-----
From: John Drescher [mailto:dre...@gm...] 
Sent: Thursday, October 28, 2010 2:19 PM
To: Jeremiah D. Jester
Cc: Duilio Poggi O.; bacula-users
Subject: Re: [Bacula-users] bacula-fd on winserver 2010

On Thu, Oct 28, 2010 at 5:04 PM, Jeremiah D. Jester <jjest@u.washington.edu> wrote:
> Pine is the fd client and .55 is the correct host ip.
>
> John - Yes, I can ping the dir from the client, however, bconsole will not connect from the client. There is no firewall on the director and windows firewall is disabled on the client.
>
> "Connecting to Director 10.200.1.124:9101" and then the DOS prompt closes.
>
> But I can ping it fine.
>
> C:\Users\jjest>ping 10.200.1.124
> Pinging 10.200.1.124 with 32 bytes of data:
> Reply from 10.200.1.124: bytes=32 time<1ms TTL=64 Reply from 
> 10.200.1.124: bytes=32 time<1ms TTL=64
>
> Other windows clients can connect without any problem so shouldn't be a port issue...
>
Although this will not help your backup problem. Make sure your bconsole.conf file is correct on the windows client. That probably should be in the same folder as the bacula-fd.conf

John