Re: [Bacula-users] SD not using more than 1 drive in autochanger

[Alex C. <ch...@pc...>]

On Mon, 3 Nov 2008 16:23:10 -0600
"Jeff Falgout" <jtf...@gm...> wrote:

> >
> > *status
> > <snipped>
> >
> > Device status:
> > Autochanger "T200-1" with devices:
> >   "T200-1-Drive-0" (/dev/nst0)
> >   "T200-1-Drive-2" (/dev/nst1)
> >   "T200-1-Drive-3" (/dev/nst2)
> > Device "T200-1-Drive-0" (/dev/nst0) is mounted with:
> >    Volume:      041775L4
> >    Pool:        Default
> >    Media type:  LTO-4
> >    Slot 6 is loaded in drive 0.
> >    Total Bytes Read=1,024 Blocks Read=1 Bytes/block=1,024
> >    Positioned at File=0 Block=0
> > Device "T200-1-Drive-2" (/dev/nst1) is not open.
> >    Drive 2 status unknown.
> > Device "T200-1-Drive-3" (/dev/nst2) is not open.
> >    Drive 3 status unknown.
> > ====

Do you have your Maximum Concurrent Jobs defined in all of the places where you need it?  You need to set it in up to five places.
http://www.bacula.org/fr/dev-manual/Tips_and_Suggestions.html#SECTION0081818000000000000000

For example, I don't see it in your Storage section in bacula-dir.conf.

Regards,
Alex