From: Dan L. <da...@la...> - 2007-01-11 20:48:11
|
I'm setting up a NEO 2000, and I'm seeing this: $ sudo /usr/local/sbin/btape -c /usr/local/etc/bacula-sd.conf /dev/nsa0 Tape block granularity is 1024 bytes. btape: butil.c:286 Using device: "/dev/nsa0" for writing. 11-Jan 15:37 btape: 3301 Issuing autochanger "loaded? drive 0" command. 11-Jan 15:37 btape: 3302 Autochanger "loaded? drive 0", result is Slot 1. 11-Jan 15:37 btape: 3301 Issuing autochanger "loaded? drive 0" command. 11-Jan 15:37 btape: 3302 Autochanger "loaded? drive 0", result is Slot 1. btape: btape.c:368 open device "NEO 2000" (/dev/nsa0): OK * Should I be concerned about that "loaded?" string? I've never seen that question mark before. $ bconsole -c /usr/local/etc/bconsole.conf Connecting to Director system100.example.com:9101 1000 OK: system100-dir Version: 2.0.0 (04 January 2007) Enter a period to cancel a command. *update slots Automatically selected Catalog: MyCatalog Using Catalog "MyCatalog" The defined Storage resources are: 1: File 2: NEO Select Storage resource (1-2): 2 Connecting to Storage daemon NEO at system100.example.com:9103 ... 3306 Issuing autochanger "slots" command. Device "NEO 2000" has 0 slots. No slots in changer to scan. * What? no slots? but.... $ sudo /usr/local/sbin/rc-chio-changer /dev/ch0 slots 29 $ grep Changer /usr/local/etc/bacula-sd.conf Changer Command = "/usr/local/sbin/rc-chio-changer %c %o %S %a %d" Changer Device = /dev/ch0 Clues? Ideas? Thanks. -- Dan Langille : Software Developer looking for work my resume: http://www.freebsddiary.org/dan_langille.php PGCon - The PostgreSQL Conference - http://www.pgcon.org/ |