Re: [Alsa-user] edirol fa-66
Brought to you by:
perex
Menu
▾
▴
Re: [Alsa-user] edirol fa-66
|
From: Clemens L. <cla...@go...> - 2012-01-26 09:31:08
|
(CC to the FFADO list) Stefan Thomas wrote: > Dear community, > I hope this is the right adress for my question, because it's not so much about alsa but about jack and firewire. > I'm using Ubuntu Oneiric and I have a firewire soundcard, the edirol fa-66. > I have installed jackd1, which includes the ffado-drivers for firewire modules. > Off course I have clicked the "enable raw1394 access" in the ubuntu studio controls. > When I start qjackctl with the firewire drivers, it stops immediately. > I can read in the message window of qjack: > > cannot load driver module firewire > > When I type > > ls -al /dev/raw1394 > > and sudo chmod 777 /dev/raw1394 > I get > > ls: Zugriff auf /dev/raw1394 nicht möglich: Datei oder Verzeichnis nicht gefunden > > (in english: can't get acess do /dev/raw139, file or folder not found) > > Somewhere I have read the one should do: > > sudo ln -s /dev/fw0 /dev/raw1394 No, this is definitely _not_ what one should do. FFADO will access /dev/fw* directly anyway. > After that I get for ls -al /dev/raw1394 > > lrwxrwxrwx 1 root root 8 2012-01-25 08:46 /dev/raw1394 -> /dev/fw0 > > But I have still the same problem! > Jack "says" always > > loading driver .. > > SSE2 detected > > libffado 2.999.0- built Oct 10 2011 08:11:23 > > firewire ERR: Error creating FFADO streaming device > > cannot load driver module firewire > > But a few months ago everything worked excellent! > Does somenone have an idea, which could be the first step in solving my problem? > The output of ffado-diag says > > > > FFADO diagnostic utility 2.999.0- > ============================ > (C) 2008 Pieter Palmers > 2009-2010 Arnold Krille > > > === CHECK === > Base system... > kernel version............ 3.0.0-15-generic > old 1394 stack present.... False > old 1394 stack loaded..... False > old 1394 stack active..... False > new 1394 stack present.... True > new 1394 stack loaded..... True > new 1394 stack active..... True > /dev/raw1394 node present. False > Prerequisites (dynamic at run-time)... > gcc ............... gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1 > g++ ............... sh: g++: not found > PyQt4 (by pyuic4) . sh: pyuic4: not found > jackd ............. jackd version 0.121.0 tmpdir /dev/shm protocol 24 > path ............ /usr/bin/jackd > flags ........... Package jack was not found in the > pkg-config search path. > Perhaps you should add the directory containing `jack.pc' > to the PKG_CONFIG_PATH environment variable > No package 'jack' found > libraw1394 ........ 2.0.7 > flags ........... -lraw1394 > libavc1394 ........ Package libavc1394 was not found in the > pkg-config search path. > Perhaps you should add the directory containing `libavc1394.pc' > to the PKG_CONFIG_PATH environment variable > No package 'libavc1394' found > flags ........... Package libavc1394 was not found in the > pkg-config search path. > Perhaps you should add the directory containing `libavc1394.pc' > to the PKG_CONFIG_PATH environment variable > No package 'libavc1394' found > libiec61883 ....... Package libiec61883 was not found in the > pkg-config search path. > Perhaps you should add the directory containing `libiec61883.pc' > to the PKG_CONFIG_PATH environment variable > No package 'libiec61883' found > flags ........... Package libiec61883 was not found in the > pkg-config search path. > Perhaps you should add the directory containing `libiec61883.pc' > to the PKG_CONFIG_PATH environment variable > No package 'libiec61883' found > libxml++-2.6 ...... Package libxml++-2.6 was not found in the > pkg-config search path. > Perhaps you should add the directory containing `libxml++-2.6.pc' > to the PKG_CONFIG_PATH environment variable > No package 'libxml++-2.6' found > flags ........... Package libxml++-2.6 was not found in the > pkg-config search path. > Perhaps you should add the directory containing `libxml++-2.6.pc' > to the PKG_CONFIG_PATH environment variable > No package 'libxml++-2.6' found > dbus-1 ............ Package dbus-1 was not found in the > pkg-config search path. > Perhaps you should add the directory containing `dbus-1.pc' > to the PKG_CONFIG_PATH environment variable > No package 'dbus-1' found > flags ........... Package dbus-1 was not found in the > pkg-config search path. > Perhaps you should add the directory containing `dbus-1.pc' > to the PKG_CONFIG_PATH environment variable > No package 'dbus-1' found > Prerequisites (static at compile-time)... > gcc ............... gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1 > g++ ............... g++ (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1 > PyQt4 (by pyuic4) . Python User Interface Compiler 4.8.5 for Qt version 4.7.3 > jackd ............. sh: jackd: not found > path ............ > flags ........... Package jack was not found in the pkg-config search path. > libraw1394 ........ 2.0.7 > flags ........... -lraw1394 > libavc1394 ........ Package libavc1394 was not found in the pkg-config search path. > flags ........... Package libavc1394 was not found in the pkg-config search path. > libiec61883 ....... 1.2.0 > flags ........... -liec61883 -lraw1394 > libxml++-2.6 ...... 2.34.1 > flags ........... -pthread -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -pthread -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lgthread-2.0 -lrt -lglib-2.0 > dbus-1 ............ 1.4.14 > flags ........... -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -ldbus-1 -lpthread -lrt > Hardware... > Host controllers: > 03:00.3 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd FireWire Host Controller [1180:e832] (prog-if 10 [OHCI]) > Subsystem: Sony Corporation Device [104d:907a] > Control: ... DisINTx+ > Interrupt: pin D routed to IRQ 55 Oooh, another PCI Express controller that claims to have MSI support ... > ... > Hardware Interrupts: > -------------------- > IRQ 55: PID: None, count: [1, 1, 1, 1, 1, 1, 1, 1], Sched None (priority None), drivers: ['firewire_ohci'] ... but doesn't fire it more than once. Stefan, please try (as root): rmmod firewire-ohci modprobe firewire-ohci quirks=81 > FireWire kernel drivers: > > The new FireWire kernel stack is loaded. > This is still kind of experimental. If you encounter problems, please also check > with the old stack. Regards, Clemens |