Re: [Alsa-user] SB Audigy 2 ZS detected incorrectly as Audigy 1

[Takashi I. <ti...@su...>]

At Thu, 06 Aug 2009 09:30:15 +0200,
I wrote:
> 
> At Tue, 28 Jul 2009 23:54:06 +0100,
> Des Gibbons wrote:
> > 
> > I have a problem getting my SB AUdigy 2 ZS recognised correctly in
> > ALSA, it seems to detect it as an audigy 1 card.
> > 
> > 
> > lspci -v
> > 
> > 05:02.0 Multimedia audio controller: Creative Labs SB Audigy (rev 05)
> >         Subsystem: Creative Labs Device 2005
> >         Flags: bus master, medium devsel, latency 64, IRQ 18
> >         I/O ports at d8c0 [size=64]
> >         Capabilities: [dc] Power Management version 2
> >         Kernel driver in use: EMU10K1_Audigy
> >         Kernel modules: snd-emu10k1
> > 
> > root@big:~# cat /proc/asound/cards
> >  0 [Audigy         ]: Audigy - Audigy 1 [Unknown]
> >                       Audigy 1 [Unknown] (rev.5, serial:0x20051102) at
> > 0xd8c0, irq 18
> > 
> > !!################################
> > !!ALSA Information Script v 0.4.57
> > !!################################
> > 
> > !!Script ran on: Tue Jul 28 22:48:38 UTC 2009
> > 
> > 
> > !!Linux Distribution
> > !!------------------
> > 
> > Ubuntu 9.04 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 9.04"
> > 
> > 
> > !!DMI Information
> > !!---------------
> > 
> > Manufacturer:      Dell Inc.
> > Product Name:      PowerEdge SC440
> > 
> > 
> > !!Kernel Information
> > !!------------------
> > 
> > Kernel release:    2.6.28-13-server
> > Operating System:  GNU/Linux
> > Architecture:      x86_64
> > Processor:         unknown
> > SMP Enabled:       Yes
> > 
> > 
> > !!ALSA Version
> > !!------------
> > 
> > Driver version:     1.0.20
> > Library version:    1.0.20
> > Utilities version:  1.0.20
> > 
> > 
> > !!Loaded ALSA modules
> > !!-------------------
> > 
> > snd_emu10k1
> > 
> > 
> > !!Advanced information - PCI Vendor/Device/Susbsystem ID's
> > !!--------------------------------------------------------
> > 
> > 05:02.0 0401: 1102:0004 (rev 05)
> > 	Subsystem: 1102:2005
> > 
> > !!-------Mixer controls for card 0 [Audigy]
> > 
> > Card hw:0 'Audigy'/'Audigy 1 [Unknown] (rev.5, serial:0x20051102) at
> > 0xd8c0, irq 18'
> >   Mixer name	: 'SigmaTel STAC9750,51'
> >   Components	: 'AC97a:83847650'
> >   Controls      : 199
> >   Simple ctrls  : 34
> > 
> > 
> > 
> > It does work ok as it is, but I can't use the 7.1 outputs, which is what I need.
> > 
> > Any advice?
> 
> Try to pass serial=0x20061102 option to snd-emu10k1 module.

Correction: subsystem=0x20061102 instead.


Takashi