Re: [Alsa-devel] [Alsa-user] Edirol DA-2496

[Jonatan de la T. <jon...@on...>]

El vie, 19-09-2003 a las 10:27, Clemens Ladisch escribi=F3:
> Jonatan de la Torre wrote:
> > * One IC whose PCB tag is IC38
> >
> > CS8420-CS
>=20
> sample rate converter
>=20
> > * Four IC's whose PCB tags are IC17, IC22, IC27, IC32
> >
> > AK4524VF
>=20
> stereo 24bit 96kHz DAC/ADC
>=20
> These chips are used on M-Audio cards, too.
>=20
> > Anything else before I close the box?
>=20
> Please try to load the snd-ice1712 driver, and show the contents of
> the /proc/asound/cardX/ice1712 file. The driver might actually work
> with your card.
>=20
> If not, the EEPROM subvendor/device ID has to be added to the driver.
> Your card looks as if it might be compatible to the Delta 1010LT; if
> it isn't, we have to know to which pins of the ICE1712 the other chips
> are connected.
>=20
>=20
> Regards,
> Clemens
>=20
>=20
Hi Clemens and people, here I am again, this is the contents of
/proc/asound/card0/ice1712
ICEnsemble ICE1712 at 0xd400, irq 15

EEPROM:
  Subvendor        : 0xce164010
  Size             : 29 bytes
  Version          : 1
  Codec            : 0x1f
  ACLink           : 0x80
  I2S ID           : 0x71
  S/PDIF           : 0x0
  GPIO mask        : 0xfc
  GPIO state       : 0x2
  GPIO direction   : 0x3
  AC'97 main       : 0x0
  AC'97 pcm        : 0x0
  AC'97 record     : 0x0
  AC'97 record src : 0x44
  DAC ID #0        : 0x7
  DAC ID #1        : 0x7
  DAC ID #2        : 0x7
  DAC ID #3        : 0x7
  ADC ID #0        : 0x7
  ADC ID #1        : 0x7
  ADC ID #2        : 0x7
  ADC ID #3        : 0x7
  Extra #28        : 0x0

Registers:
  PSDOUT03         : 0x0000
  CAPTURE          : 0x00000000
  SPDOUT           : 0x800f
  RATE             : 0x08

The driver almost works but how can I know wich one ? I think that only
OSS driver works but ALSA not.
Maybe the owner manual helps you. I can send the pdf file and some
snapshots of the M$Windows Control Panel to you.

How do I do to know the conections? I follow the tracks on the board?