Re: [Alsa-user] Trouble installing on an HP ZT1180
Brought to you by:
perex
From: Michael A. <mik...@iq...> - 2003-09-23 22:07:30
|
Okay, removing all of the sound-related modules from modules.conf resolved the errors, and I have re-ran all of the installs for the alsa drivers, I added the suggested lines to modules.conf, and I have gone in to alsamixer and unmuted everything except headphones, and turned the volume sliders up to 20. However, I still get no sound. In addition, I launch xmms and try to play an mp3, no sound, doesn't seem to want to actually play any files. However, I don't get any error messages regarding the sound card. Any ideas? On Tue, 2003-09-23 at 13:45, Frans Ketelaars wrote: > On Tuesday 23 September 2003 19:08, Michael Amos wrote: > > It appears that is the case. How do I remove the old drivers? > > Please (also) reply to the list, they may know than me, also it's > usefull for people searching the archives :) > > The easiest way seems to remove all sound related lines in > /etc/modules.conf and follow the instructions at > http://www.alsa-project.org/alsa-doc/ for your VIA soundchip. > Rebooting should get the ALSA drivers loaded. > > HTH, > > -Frans > > > On Tue, 2003-09-23 at 00:13, Frans Ketelaars wrote: > > > On Monday 22 September 2003 23:03, Michael Amos wrote: > > > > I'm running an HP ZT1180, RedHat 9. Everything builds fine, but > > > > when I attempt to do the modprobe portion of the destructions, I > > > > get the following: > > > > > > > > /lib/modules/2.4.20-19.9/kernel/sound/pci/snd-via82xx.o: > > > > init_module: No such device > > > > Hint: insmod errors can be caused by incorrect module parameters, > > > > including invalid IO or IRQ parameters. > > > > You may find more information in syslog or the output from > > > > dmesg /lib/modules/2.4.20-19.9/kernel/sound/pci/snd-via82xx.o: > > > > insmod /lib/modules/2.4.20-19.9/kernel/sound/pci/snd-via82xx.o > > > > failed /lib/modules/2.4.20-19.9/kernel/sound/pci/snd-via82xx.o: > > > > insmod snd-via82xx failed > > > > /lib/modules/2.4.20-19.9/kernel/sound/acore/seq/oss/snd-seq-oss.o > > > >: init_module: Device or resource busy > > > > Hint: insmod errors can be caused by incorrect module parameters, > > > > including invalid IO or IRQ parameters. > > > > You may find more information in syslog or the output from > > > > dmesg > > > > /lib/modules/2.4.20-19.9/kernel/sound/acore/seq/oss/snd-seq-oss.o > > > >: insmod > > > > /lib/modules/2.4.20-19.9/kernel/sound/acore/seq/oss/snd-seq-oss.o > > > > failed > > > > /lib/modules/2.4.20-19.9/kernel/sound/acore/seq/oss/snd-seq-oss.o > > > >: insmod snd-seq-oss failed > > > > > > > > Any ideas? > > > > > > Maybe the OSS driver (via82cxxx_audio ?) is still loaded? You can > > > check with '/sbin/lsmod'. > > > > > > HTH, > > > > > > -Frans > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > Alsa-user mailing list > Als...@li... > https://lists.sourceforge.net/lists/listinfo/alsa-user -- Michael Amos <mik...@iq...> |