Re: [Alsa-user] snd-usb-audio and Midiman Oxygen
Brought to you by:
perex
From: Paul W. <pw_...@sl...> - 2002-12-09 23:59:39
|
On Mon, Dec 09, 2002 at 11:04:32AM +0100, Clemens Ladisch wrote: > There should now be messages about a disconnect and another new device > connect. Maybe the firmware didn't get loaded properly. > > Please try to run the loader by hand, maybe there's an error message: > /sbin/fxload -s /usr/share/usb/MidiSportLoader.ihx -I /usr/share/usb/MidiSportKS.ihx > OK, here's what I get: $ sudo /sbin/fxload -s /usr/share/usb/MidiSportLoader.ihx -I /usr/share/usb/MidiSportKS.ihx no device specified! usage: /sbin/fxload [-vV] [-t type] [-D devpath] [-I firmware_hexfile] [-s loader] [-c config_byte] [-L link] [-m mode] ... [-D devpath] overrides DEVICE= in env ... device types: one of an21, fx, fx2 ... at least one of -I, -L, -m is required So, I look at "man fxload" and find out that the arg to -D should be a path in /proc/bus/usb, and further that this path should be "a usbfs file ... provided by the Linux kernel as part of USB hotplugging." But... /proc/bus/usb is empty when the device is plugged in. Maybe my kernel is not really set up right for usbfs. Time for more research... -- Paul Winkler http://www.slinkp.com "Welcome to Muppet Labs, where the future is made - today!" |