Re: [Alsa-user] MSI kt3 ultra-aru

[Dr. D. W. <da...@ch...>]

Dear Frank, Honza, Todd, et al,

i have now got the alsa 0.9 installed and using alsamixer, unmuted=20
everything and turned the volumes up.
but still no sound.
in gnome i can see the software is processing sound and the
panel applet mixer and sound monitor show action when I play and mp3=20
in xmms
and xmms oplays the mp3 as the visuals are active.

my speakers are fine  as the cd player works.
I am running the commercial X-server form Xig, for hardware stereo=20
graphics, might this cause a conflict

here is my modules.conf

alias eth0 eepro100
alias parport_lowlevel parport_pc
alias usb-controller usb-uhci
# ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-via8322
alias snd-card-1 snd-via8322
options snd-card-via8233 snd_id=3D"Via8233" snd_index=3D0
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-via8322
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias char-major-10-179 xsvc

cheers

Dan

On Thursday, June 27, 2002, at 11:06 PM, Todd Witter wrote:

> There are samples of what to put in your /etc/modules.conf file in=20
> the INSTALL doc.
> eg:
> =A0
> # ALSA portion
> alias char-major-116 snd=A0 (I'm making this up but hopefully you'll=20=

> get the idea)
> alias snd-card-0 snd-ymfpci (my sound card driver... replace with=20
> yours)
> alias snd-card-1 snd-ymfpci
> =A0
> ..and so on.=A0 Read through the entire INSTALL doc... it'll show you=20=

> some examples including what to add for OSS stuff, too.
> =A0
> Todd
>
> ----- Original Message -----
> From: Dr. Dan White
> To: ber...@kn...
> Cc: Takashi Iwai ; als...@li...
> Sent: Thursday, June 27, 2002 12:41 PM
> Subject: Re: [Alsa-user] MSI kt3 ultra-aru
>
> Hi Honza and Takashi
>
> Now I have downloaded the 5 alsa 0.9 tarballs
> unpacked them, got the patch and ran it, then did
>
> ./configure --with-cards=3Dvia8233 --with-oss=3Dyes
> make
> make install
>
> for the drivers dir
> and for the others did
>
> ./configure
> make
> make install
>
> All went well, no errors
>
> So now you say I need to edit modutils
> but I can't see this file, what did you mean??????
> exactly what should I put where.?????
>
> do i need to edit my /etc/modules.conf
> if so what needs to be in there. I don't understand the instructions=20=

> in the drivers directory INSTALL file
>
> cheers
>
> Dan
>
> -------------------------------------------
> the way to do it:
> patch -p0 < ~/configure.dif
> (patch is in your home directory and you're in the
> alsa-driver directory)
> than compile the driver
> ./configure --with-cards=3Dvia8233 --with-oss=3Dyes
> make
> ./snddevices
> than libs
> ./configure
> make
> than utils
> /configure
> make
> edit modutils (read INSTALL and README in alsa-driver directory)
> modprobe snd-via8233
> unmute card with alsamixer (or amixer)
> listen to music :)
>
> ps:
> Just front speakers working
> (I wasn't able to switch card to 5+1 mode withou s-bracket ....)
>
> Feel free to ask me if you still have problems
>
>
> Honza
> -------------------------------
>
>
> -------------------------------------------------------
> Sponsored by:
> ThinkGeek at http://www.ThinkGeek.com/
> _______________________________________________
> Alsa-user mailing list
> Als...@li...
> https://lists.sourceforge.net/lists/listinfo/alsa-user
>
>
Daniel James White PhD.
Cell Biology
Department of Biological and Environmental Science
University of Jyv=E4skyl=E4
FIN-40351
Jyv=E4skyl=E4
Finland

da...@ch...
http://www.chalkie.org.uk
>