RE: [Airjack-users] Airjack error - Operation not permitted

[Jerry S. <js...@de...>]

I believe that was true.  I rebuilt the kernel with some things out of
it and now the driver builds just fine and works with essid_jack an
other tools.  I still can't get airjack to build...I think I have my
kernel source tree all screwed up.  I really probably should start over
but most things work just great and I'd hate to screw it up.  I ought to
get airjack working on my ipaq...then I could rebuild/fix my laptop.

-----Original Message-----
From: Abaddon [mailto:ab...@80...] 
Sent: Monday, November 03, 2003 6:47 AM
To: Jerry Shenk
Cc: 'Joshua Wright'; 'airjack-users'
Subject: RE: [Airjack-users] Airjack error - Operation not permitted


as best I can tell this is some redhat kernel thing, if you're not
running redhat please let me know what you're running...can you let me
know the kernel you're using including any redhat
subversions...thanks...

--Abaddon


On Tue, 2003-10-28 at 08:38, Jerry Shenk wrote:
> Here's the last couple lines of dmesg:
> airjack_cs: Initialization complete.
> aj0: index 0x01: Vcc 5.0, Vpp 5.0, irq 5, io 0x0140-0x017f
> eth0: flipped to 10baseT
> eth0: flipped to 10baseT
> 
> And here's the response from id:
> uid=0(root) gid=0(root)
> groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel)
> 
> And here's the exact error when I run essid_jack:
> ]# ./essid_jack -b 00:04:96:50:27:67  -c 1 -i aj0
> get_socket: Operation not permitted
> 
> -----Original Message-----
> From: Joshua Wright [mailto:Jos...@jw...] 
> Sent: Tuesday, October 28, 2003 7:53 AM
> To: Jerry Shenk; airjack-users
> Subject: RE: [Airjack-users] Airjack error - Operation not permitted
> 
> 
> Jerry,
> 
> > I've been working on getting AirJack working today.  I believe I
have
> > the drivers built but when I try to run most of the executables, I
get
> > either a message that I don't have the parameters right 
> > (which I can get by) or an "operation not permitted".
> 
> Are you running the tools as root?  To open and bind sockets, you need
> root privileges.  I usually run airjack and related tools with sudo -
> "sudo essid_jack ...".
>  
> > I also have not been able to build airjack.  With version 
> > 0.6.6b-alpha,
> > I get a whole pile of undefined references.  With 6.2, I get errors
> > about "_not_SMP safe...".  In both cases, it ends with "make: ***
> > [airjack.o] Error 1".  Also, in both cases everything in the tools
> > directory seems to be built correctly and runs till I get the 
> > parameters right, then I get the "operation not permitted".
> 
> Sounds like your Linux kernel has SMP support enabled.  You can either
> recompile your kernel without SMP support (assuming your machine has a
> single processor), or just edit the Makefile to remove any instances
of
> "-Werror".
> 
> Try running the tools as root.  If you still have a problem, send the
> exact output from the message with the output of "id" and the last few
> lines of "dmesg".
> 
> -Joshua Wright
> Senior Network and Security Architect
> Johnson & Wales University
> Jos...@jw... 
> http://home.jwu.edu/jwright/
> 
> pgpkey: http://home.jwu.edu/jwright/pgpkey.htm
> fingerprint: FDA5 12FC F391 3740 E0AE BDB6 8FE2 FC0A D44B 4A73
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: The SF.net Donation Program.
> Do you like what SourceForge.net is doing for the Open
> Source Community?  Make a contribution, and help us add new
> features and functionality. Click here: http://sourceforge.net/donate/
> _______________________________________________
> Airjack-users mailing list
> Air...@li...
> https://lists.sourceforge.net/lists/listinfo/airjack-users