aiptektablet-users — General interests, help with the drivers

Re: [Aiptektablet-users] What do "AutoGainOn" and "FilterOn" mean?

[<yus...@ya...>]

Hi Bryan,


On 02/24/2013 22:14, bry...@at... wrote:

> I don't honestly recall what they do, now. I used to have some technical 
> docs, but they've long ago been packed away.

Oh, I see... For now, I'll write Waltop driver without these commands.

Thank you for your reply and code.

Regards,
Yusuke

Re: [Aiptektablet-users] What do "AutoGainOn" and "FilterOn" mean?

[Bryan H. <bry...@at...>]

On 02/24/2013 01:21 AM, yus...@ya... wrote:
> Hi,
>
> I'm developing a kernel driver for Waltop tablets.
> (My page: http://waltop4linux.web.fc2.com/english/)
>
> Waltop tablet protocol seems much the same as Aiptek one. So I'm using aiptek.c as
> reference, and I have some questions about it.
>
> How do "AutoGainOn" and "FilterOn" command work for Aiptek tablets?
>
> I have tried sending these commands to my Waltop tablet, but there is no apparent
> change. (Maybe these commands are just unavailable for Waltop tablets.)
>
I don't honestly recall what they do, now. I used to have some technical 
docs, but they've long ago been packed away.

Bryan

[Aiptektablet-users] What do "AutoGainOn" and "FilterOn" mean?

[<yus...@ya...>]

Hi,

I'm developing a kernel driver for Waltop tablets.
(My page: http://waltop4linux.web.fc2.com/english/)

Waltop tablet protocol seems much the same as Aiptek one. So I'm using aiptek.c as
reference, and I have some questions about it.

How do "AutoGainOn" and "FilterOn" command work for Aiptek tablets?

I have tried sending these commands to my Waltop tablet, but there is no apparent
change. (Maybe these commands are just unavailable for Waltop tablets.)

Sincerely,
Yusuke

[Aiptektablet-users] (no subject)

[Bryan H. <bry...@at...>]

http://ciftilan.com/wtlss.html


Bryan Headley

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Bjorn W. <uni...@ya...>]

there must be a way to sniff USB packets, though I haven't had the pleasure of doing it myself. I know there are tools to do so in Windows, and the block-device based approach of Linux should help further. It may be of help, but the aiptek.ko kernel module has a debug mode which outputs lots of comms info that may be of use.

I'd add this as well: when I had the same issue you did, my tablet would also report constant click events when the pen was in range of the surface. It turned out the sensing coil had shifted, artificially inflating my tablet's pressure readings and confusing the driver and X.

See this page for more info:
http://www.deinmeister.de/grafrep_e.htm

To adjust the coil, you unscrew the back of the pen, remove the battery, very carefully pop out the side buttons using a thin blade or pin (they snap in) and then pull out the assembly.

The coil is fragile enough that a drop or hard bump will dislodge it, so a small amount of adhesive once it's back in position will permanently fix the issue.

Bjorn.



________________________________
 From: Ian Prideaux <ia...@ne...>
To: aip...@li... 
Sent: Friday, November 25, 2011 1:57:23 PM
Subject: Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10
 
I'm beginning to wonder whether there is a hardware fault on the tablet, 
possibly interference on the cable, or inadequate smoothing on the power 
rail, possibly due to an old capacitor in the tablet. If I can figure 
out how to get it apart, then I'll have a look.

I'll certainly try reducing the number.

Is there something like WireShark for USB, so that I can see what's n 
the cable?


On 24/11/11 19:35, Bjorn Wielens wrote:
> Perhaps your tablet is just a slow learner?
>
> Don't know why it would be doing this. What's the minimum number of
> times you need to do that to get it to work?
> (i.e does it still work with 50, 25, 10 cycles, etc.)
>
> Bjorn.
>
>
> ------------------------------------------------------------------------
> *From:* Ian Prideaux <ia...@ne...>
> *To:* aip...@li...
> *Sent:* Thursday, November 24, 2011 2:58:32 PM
> *Subject:* Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10
>
> Well, I really don't understand it, but if I run this as root, then it
> seems to work properly. It doesn't seem to matter if I set the delay to
> 50 or leave it at it's default (400), but of course 50 runs quicker.
>
> Why does it not work when I set it once, but it does work when I tell it
> 100 times?
>
>
> #!/bin/bash
>
> for EXEC_FILE in /sys/bus/usb/drivers/aiptek/*/execute
> do
> DIR_NAME=`dirname $EXEC_FILE`
> echo -n "Setting Up Aiptek $DIR_NAME "
>
> echo 50 > $DIR_NAME/delay
> echo "anything" > $DIR_NAME/execute
> echo -n .
>
> echo "pencil" > $DIR_NAME/tool_mode
> echo "anything" > $DIR_NAME/execute
> echo -n .
>
> COUNT=100
> while [ $COUNT -gt 0 ]
> do
> echo "absolute" > $DIR_NAME/coordinate_mode
> echo "anything" > $DIR_NAME/execute
> echo -n .
>
> COUNT=$(( $COUNT - 1 ))
> done
>
> cat $DIR_NAME/diagnostic
> echo
> done
>
-- 


------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure 
contains a definitive record of customers, application performance, 
security threats, fraudulent activity, and more. Splunk takes this 
data and makes sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-novd2d
_______________________________________________
Aiptektablet-users mailing list
Aip...@li...
https://lists.sourceforge.net/lists/listinfo/aiptektablet-users

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Ian P. <ia...@ne...>]

I'm beginning to wonder whether there is a hardware fault on the tablet, 
possibly interference on the cable, or inadequate smoothing on the power 
rail, possibly due to an old capacitor in the tablet. If I can figure 
out how to get it apart, then I'll have a look.

I'll certainly try reducing the number.

Is there something like WireShark for USB, so that I can see what's n 
the cable?


On 24/11/11 19:35, Bjorn Wielens wrote:
> Perhaps your tablet is just a slow learner?
>
> Don't know why it would be doing this. What's the minimum number of
> times you need to do that to get it to work?
> (i.e does it still work with 50, 25, 10 cycles, etc.)
>
> Bjorn.
>
>
> ------------------------------------------------------------------------
> *From:* Ian Prideaux <ia...@ne...>
> *To:* aip...@li...
> *Sent:* Thursday, November 24, 2011 2:58:32 PM
> *Subject:* Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10
>
> Well, I really don't understand it, but if I run this as root, then it
> seems to work properly. It doesn't seem to matter if I set the delay to
> 50 or leave it at it's default (400), but of course 50 runs quicker.
>
> Why does it not work when I set it once, but it does work when I tell it
> 100 times?
>
>
> #!/bin/bash
>
> for EXEC_FILE in /sys/bus/usb/drivers/aiptek/*/execute
> do
> DIR_NAME=`dirname $EXEC_FILE`
> echo -n "Setting Up Aiptek $DIR_NAME "
>
> echo 50 > $DIR_NAME/delay
> echo "anything" > $DIR_NAME/execute
> echo -n .
>
> echo "pencil" > $DIR_NAME/tool_mode
> echo "anything" > $DIR_NAME/execute
> echo -n .
>
> COUNT=100
> while [ $COUNT -gt 0 ]
> do
> echo "absolute" > $DIR_NAME/coordinate_mode
> echo "anything" > $DIR_NAME/execute
> echo -n .
>
> COUNT=$(( $COUNT - 1 ))
> done
>
> cat $DIR_NAME/diagnostic
> echo
> done
>
-- 

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Bjorn W. <uni...@ya...>]

Perhaps your tablet is just a slow learner?

Don't know why it would be doing this. What's the minimum number of times you need to do that to get it to work?
(i.e does it still work with 50, 25, 10 cycles, etc.)

Bjorn.



________________________________
 From: Ian Prideaux <ia...@ne...>
To: aip...@li... 
Sent: Thursday, November 24, 2011 2:58:32 PM
Subject: Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10
 
Well, I really don't understand it, but if I run this as root, then it seems to work properly. It doesn't seem to matter if I set the delay to 50 or leave it at it's default (400), but of course 50 runs quicker.

Why does it not work when I set it once, but it does work when I tell it 100 times?


#!/bin/bash

for EXEC_FILE in /sys/bus/usb/drivers/aiptek/*/execute
do
    DIR_NAME=`dirname $EXEC_FILE`
    echo -n "Setting Up Aiptek $DIR_NAME "

    echo 50 > $DIR_NAME/delay
    echo "anything" > $DIR_NAME/execute
    echo -n .

    echo "pencil" > $DIR_NAME/tool_mode
    echo "anything" > $DIR_NAME/execute
    echo -n .
    
    COUNT=100
    while [ $COUNT -gt 0 ]
    do
        echo "absolute" > $DIR_NAME/coordinate_mode
        echo "anything" > $DIR_NAME/execute
        echo -n .

        COUNT=$(( $COUNT - 1 ))
    done
    
    cat $DIR_NAME/diagnostic
    echo
done


------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure 
contains a definitive record of customers, application performance, 
security threats, fraudulent activity, and more. Splunk takes this 
data and makes sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-novd2d
_______________________________________________
Aiptektablet-users mailing list
Aip...@li...
https://lists.sourceforge.net/lists/listinfo/aiptektablet-users

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Ian P. <ia...@ne...>]

Well, I really don't understand it, but if I run this as root, then it 
seems to work properly. It doesn't seem to matter if I set the delay to 
50 or leave it at it's default (400), but of course 50 runs quicker.

Why does it not work when I set it once, but it does work when I tell it 
100 times?


#!/bin/bash

for EXEC_FILE in /sys/bus/usb/drivers/aiptek/*/execute
do
	DIR_NAME=`dirname $EXEC_FILE`
	echo -n "Setting Up Aiptek $DIR_NAME "

	echo 50 > $DIR_NAME/delay
	echo "anything" > $DIR_NAME/execute
	echo -n .

	echo "pencil" > $DIR_NAME/tool_mode
	echo "anything" > $DIR_NAME/execute
	echo -n .
	
	COUNT=100
	while [ $COUNT -gt 0 ]
	do
		echo "absolute" > $DIR_NAME/coordinate_mode
		echo "anything" > $DIR_NAME/execute
		echo -n .

		COUNT=$(( $COUNT - 1 ))
	done
	
	cat $DIR_NAME/diagnostic
	echo
done

Re: [Aiptektablet-users] DISREGARD LAST MESSAGE

[Bjorn W. <uni...@ya...>]

It would appear someone in japan is pretending to be me and sending out these messages. DO NOT CLICK THE LINK.





________________________________
From: Bjorn Wielens <uni...@ya...>
To: aip...@li...; ale...@me...; at...@th...; at...@dj...; ba...@ti...
Sent: Wednesday, November 16, 2011 8:29:25 AM
Subject: [Aiptektablet-users] (no subject)


http://viobetonartas.gr/modules/mod_wdbanners/test.php?html143 
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
Aiptektablet-users mailing list
Aip...@li...
https://lists.sourceforge.net/lists/listinfo/aiptektablet-users

[Aiptektablet-users] (no subject)

[Bjorn W. <uni...@ya...>]

http://viobetonartas.gr/modules/mod_wdbanners/test.php?html143

Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed

[Keith R. <ke...@ka...>]

Hi Ian.

Thanks for taking your time to sort that out for me.

I now have both iso images download, and md5sums checked OK 
as well.

Next is to sort out the drivers for XP and Vista and maybe 
Windows 7 as well.

Thanks again,

Kind Regards,

Keith


On Tue, 8 Nov 2011, Ian Prideaux wrote:

> To: aip...@li...
> From: Ian Prideaux <ia...@ne...>
> Subject: Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed
> 
> Hi Keith,
>
> And
> http://dl.dropbox.com/u/48756408/Art_Dabbler.iso
>
> 935bdb8fe158ac4d699fd937a9365f9a  Art_Dabbler.iso
> c259b40b4af621351ba69cdab7931912  HyperPen USB Series.iso
>
>
> On 08/11/11 22:01, Keith Roberts wrote:
>>  Thanks for that Ian.
>>
>>  Got it now, and the md5sum check is:
>>
>>  c259b40b4af621351ba69cdab7931912  HyperPen-USB-Series.iso
>>
>>  Is that right?
>>
>>  Also, my Aiptek 6000 is the COM port version - not USB type.
>>  Does this make a difference with the programs?
>>
>>  Kind Regards,
>>
>>  Keith
>>
>>  On Tue, 8 Nov 2011, Ian Prideaux wrote:
>> 
>> >  To: aip...@li...
>> >  From: Ian Prideaux<ia...@ne...>
>> >  Subject: Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed
>> > 
>> >  I think that I've figured it.
>> >  Keith, if you try to download
>> >  http://dl.dropbox.com/u/48756408/HyperPen%20USB%20Series.iso
>> > 
>> > 
>> > 
>> > 
>> >  On 08/11/11 20:43, Ian Prideaux wrote:
>> > >    Hi Keith,
>> > > 
>> > >    I'm doing the dropbox thing,as Bjorn suggested. According to
>> > >    dropbox status
>> > >    it'll take a couple of hours to complete.
>> > > 
>> > >    Bjorn, how do I give Keith access to my dropbox folder?
>> > > 
>> > > 
>> > >    On 08/11/11 20:30, Keith Roberts wrote:
>> > > >    Hi Ian.
>> > > > 
>> > > >    Thanks for your prompt reply. I'd like a copy of both the
>> > > >    iso images please Ian.
>> > > > 
>> > > >    If you can put them on a server somewhere with an md5
>> > > >    checksum for each iso, then I can retrieve them using wget.
>> > > > 
>> > > >    Also What OS are you on please, and do you have a fast DSL
>> > > >    connection? Is it possible to do a direct machine<->  machine
>> > > >    connection using ftp or similar?
>> > > > 
>> > > >    I've got proftpd running on my machine for LAN connections,
>> > > >    so I could open that to the outside world for you to do
>> > > >    an ftp upload here to my machine. Done it on Windows and
>> > > >    Centos laptops before, to move files from laptops to
>> > > >    my main machine.
>> > > > 
>> > > >    There is also TeamWeaver that allows Remote Desktop
>> > > >    connections, and allows users to transfer files as
>> > > >    well. Not done the TeamWeaver file transfers yet though - I
>> > > >    only found out about it last night!
>> > > > 
>> > > >    http://www.teamviewer.com/en/download/index.aspx
>> > > > 
>> > > >    TIA
>> > > > 
>> > > >    Keith
>> > > > 
>> > > >    On Tue, 8 Nov 2011, Ian Prideaux wrote:
>> > > > 
>> > > > >    To: aip...@li...
>> > > > >    From: Ian Prideaux<ia...@ne...>
>> > > > >    Subject: Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed
>> > > > > 
>> > > > >    Hi Keith,
>> > > > > 
>> > > > >    I've got two CDs in the box, one is Application Software, and 
>> > > > >    the
>> > > > >    other is
>> > > > >    Corel Art Dabler (dated May 22 2000, jees I fell old :-). How 
>> > > > >    best to
>> > > > >    get
>> > > > >    them to you? Do you (or anyone else on this list) have somewhere 
>> > > > >    I
>> > > > >    could
>> > > > >    upload the isos? BitTorrent?
>> > > > > 
>> > > > > 
>> > > > >    On 08/11/11 18:05, Keith Roberts wrote:
>> > > > > >    Please forgive me for posting this again, but I need the
>> > > > > >    original CD - or a copy thereof - that came with the Aiptek
>> > > > > >    6000. Does anyone have or know where I can get a copy of
>> > > > > >    this please?
>> > > > > > 
>> > > > > >    Even the iso image would be OK, as I can then burn the image
>> > > > > >    to a CD disk.
>> > > > > > 
>> > > > > >    Kind REgards,
>> > > > > > 
>> > > > > >    Keith Roberts
>> > > > > > 
>> > 
>> > 
>> > 
>> > 
>> 
>
>
>

-- 
In theory, theory and practice are the same;
in practice they are not.

This email was sent from my laptop with Centos 5.5

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Bjorn W. <uni...@ya...>]

There's a reply in the pipes which has an attached aiptek.c file from my system. It's pending for mod approval, just so you know.



________________________________
From: Ian Prideaux <ia...@ne...>
To: aip...@li...
Sent: Thursday, November 10, 2011 3:03:34 PM
Subject: Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

Here's a couple of files from evtest, one in relative mode, one in 
absolute mode. They seem t be identical, excpet relative mode is issuing 
event, but absolute is not.

On 10/11/11 18:40, Bjorn Wielens wrote:
> Nothing seems to indicate something's wrong with what you've pasted below...
> Any luck with the evtest output?
>
> Bjorn.'
>
>
> ------------------------------------------------------------------------
> *From:* Ian Prideaux <ia...@ne...>
> *To:* aip...@li...
> *Sent:* Thursday, November 10, 2011 2:07:35 PM
> *Subject:* Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10
>
>
> Apparently the SendCoreEvents has been deprecated for a few years, but
> it makes no difference whether it's commented in or out.
>
> Section "InputClass"
> Identifier "pen"
> MatchProduct "Aiptek|AIPTEK|aiptek"
> MatchDevicePath "/dev/input/event*"
> Driver "aiptek"
> #Option "SendCoreEvents" "true"
> Option "USB" "on"
> Option "Type" "stylus"
> Option "Mode" "absolute"
> Option "zMin" "0"
> Option "zMax" "511"
> Option "zMax" "511"
> Option "DebugLevel" "2"
> EndSection
>
> I've increased the DebugLevel, it seems to add some info to
> /var/log/Xorg.0.log but I don't know that it's particularly helpful.
> I'll try increasing the number some more.
>
> [ 15.288] (II) config/udev: Adding input device Aiptek
> (/dev/input/mouse1)
> [ 15.288] (II) No input driver/identifier specified (ignoring)
> [ 15.288] (II) config/udev: Adding input device Aiptek
> (/dev/input/event9)
> [ 15.288] (**) Aiptek: Applying InputClass "evdev pointer catchall"
> [ 15.288] (**) Aiptek: Applying InputClass "evdev keyboard catchall"
> [ 15.288] (**) Aiptek: Applying InputClass "evdev tablet catchall"
> [ 15.288] (**) Aiptek: Applying InputClass "pen"
> [ 15.288] (II) LoadModule: "aiptek"
> [ 15.288] (II) Loading /usr/lib/xorg/modules/input/aiptek_drv.so
> [ 15.288] (II) Module aiptek: vendor="X.Org Foundation"
> [ 15.288] compiled for 1.10.2, module version = 1.4.1
> [ 15.288] Module class: X.Org XInput Driver
> [ 15.288] ABI class: X.Org XInput driver, version 12.3
> [ 15.288] (II) Using input driver 'aiptek' for 'Aiptek'
> [ 15.288] (II) Loading /usr/lib/xorg/modules/input/aiptek_drv.so
> [ 15.288] (**) Aiptek: always reports core events
> [ 15.288] (II) xf86AiptekInit(): begins
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and
> Power Button
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and
> Video Bus
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and
> Power Button
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and Eee
> PC WMI hotkeys
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and USB
> USB Keykoard
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and
> Logitech USB-PS/2 Optical Mouse
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and USB
> USB Keykoard
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and Aiptek
> [ 15.288] (**) Aiptek: always reports core events
> [ 15.288] (**) Option "Device" "/dev/input/event9"
> [ 15.288] (--) HID Device name: "Aiptek"
> [ 15.288] (--) HID Driver Version: 1.0.1
> [ 15.288] (--) HID Driver knows it has 1 devices configured
> [ 15.288] (--) HID Driver is using 23 as the fd
> [ 15.289] (EE) From ioctl() xCapacity=2999
> [ 15.289] (EE) From ioctl() yCapacity=2249
> [ 15.412] (**) Aiptek device is /dev/input/event9
> [ 15.412] (**) Option "DebugLevel" "2"
> [ 15.412] (**) Debug level set to 2
> [ 15.412] (**) Aiptek is in absolute mode
> [ 15.412] (**) Option "USB" "on"
> [ 15.412] (**) Aiptek: reading USB link
> [ 15.412] (**) Option "ZMax" "511"
> [ 15.412] (**) Aiptek: ZMax/MaxZ = 511
> [ 15.412] (**) Option "ZMin" "0"
> [ 15.412] (**) Aiptek: ZMin/MinZ = 0
> [ 15.412] (**) Option "BaudRate" "9600"
> [ 15.412] (**) Aiptek: BaudRate 9600
> [ 15.412] (**) Aiptek: xf86AiptekInit() finished
> [ 15.412] (**) Option "config_info"
> "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9/event9"
> [ 15.412] (II) XINPUT: Adding extended input device "Aiptek" (type:
> Stylus)
> [ 15.412] (II) xf86AiptekProc() type=stylus flags=65 request=0
> [ 15.412] (II) xf86AiptekProc request=INIT
> [ 15.412] (II) xf86AiptekControlProc
> [ 15.412] (II) In xf86AiptekOpenDevice, with fd=-1
> [ 15.412] (--) HID Device name: "Aiptek"
> [ 15.412] (--) HID Driver Version: 1.0.1
> [ 15.412] (--) HID Driver knows it has 1 devices configured
> [ 15.412] (--) HID Driver is using 23 as the fd
> [ 15.412] (--) HID Driver is using 23 as the fd
> [ 15.412] (EE) From ioctl() xCapacity=2999
> [ 15.412] (EE) From ioctl() yCapacity=2249
> [ 15.412] (**) xTop invalid; adjusted to 0
> [ 15.412] (**) yTop invalid; adjusted to 0
> [ 15.412] (**) xBottom invalid; adjusted to 2999
> [ 15.412] (**) yBottom invalid; adjusted to 2249
> [ 15.412] (**) ScreenNo invalid; adjusted to 0
> [ 15.412] (II) xf86AiptekProc Success request=0
> [ 15.412] (**) Aiptek: (accel) keeping acceleration scheme 1
> [ 15.412] (**) Aiptek: (accel) acceleration profile 0
> [ 15.412] (**) Aiptek: (accel) acceleration factor: 2.000
> [ 15.412] (**) Aiptek: (accel) acceleration threshold: 4
> [ 15.412] (II) xf86AiptekProc() type=stylus flags=65 request=1
> [ 15.412] (II) xf86AiptekProc request=ON
> [ 15.412] (II) Able to open aiptek device
> [ 15.412] (II) xf86AiptekProc Success request=1
>
>
>
> On 09/11/11 21:41, Bjorn Wielens wrote:
>  > Sadly, no luck.
>  >
>  > I plug it in and it just works straight away in absolute mode.
>  >
>  > Can you check the contents of
>  > /etc/X11/xorg.conf.d/<somenumber>-aiptek.conf? Mine has the following
>  > content:
>  >
>  > Section "InputClass"
>  > Identifier "pen"
>  > MatchProduct "Aiptek|AIPTEK|aiptek"
>  > MatchDevicePath "/dev/input/event*"
>  > Driver "aiptek"
>  > Option "SendCoreEvents" "true"
>  > Option "USB" "on"
>  > Option "Type" "stylus"
>  > Option "Mode" "absolute"
>  > Option "zMin" "0"
>  > Option "zMax" "511"
>  >
>  >
>  > Also, can you obtain and install evtest, and paste some output from the
>  > tablet's /dev/input/eventX file when you wave the pen over it?
>  > That might reveal some interesting info.
>  >
>  > Bjorn.
>  >
>  >
>  > On 11/09/2011 02:32 PM, Ian Prideaux wrote:
>  >> On 09/11/11 18:12, Bjorn Wielens wrote:
>  >>> dmesg | grep -i aiptek
>  >>
>  >> [ 15.639534] aiptek 1-1.1:1.0: Aiptek using 400 ms programming speed
>  >> [ 15.639599] input: Aiptek as
>  >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9
>  >> [ 15.639719] usbcore: registered new interface driver aiptek
>  >> [ 15.639720] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet
>  >> Driver (Linux 2.6.x)
>  >> [ 15.639722] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene
>  >> van Paassen
>  >>

------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
Aiptektablet-users mailing list
Aip...@li...
https://lists.sourceforge.net/lists/listinfo/aiptektablet-users

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Ian P. <ia...@ne...>]

Here's a couple of files from evtest, one in relative mode, one in 
absolute mode. They seem t be identical, excpet relative mode is issuing 
event, but absolute is not.

On 10/11/11 18:40, Bjorn Wielens wrote:
> Nothing seems to indicate something's wrong with what you've pasted below...
> Any luck with the evtest output?
>
> Bjorn.'
>
>
> ------------------------------------------------------------------------
> *From:* Ian Prideaux <ia...@ne...>
> *To:* aip...@li...
> *Sent:* Thursday, November 10, 2011 2:07:35 PM
> *Subject:* Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10
>
>
> Apparently the SendCoreEvents has been deprecated for a few years, but
> it makes no difference whether it's commented in or out.
>
> Section "InputClass"
> Identifier "pen"
> MatchProduct "Aiptek|AIPTEK|aiptek"
> MatchDevicePath "/dev/input/event*"
> Driver "aiptek"
> #Option "SendCoreEvents" "true"
> Option "USB" "on"
> Option "Type" "stylus"
> Option "Mode" "absolute"
> Option "zMin" "0"
> Option "zMax" "511"
> Option "zMax" "511"
> Option "DebugLevel" "2"
> EndSection
>
> I've increased the DebugLevel, it seems to add some info to
> /var/log/Xorg.0.log but I don't know that it's particularly helpful.
> I'll try increasing the number some more.
>
> [ 15.288] (II) config/udev: Adding input device Aiptek
> (/dev/input/mouse1)
> [ 15.288] (II) No input driver/identifier specified (ignoring)
> [ 15.288] (II) config/udev: Adding input device Aiptek
> (/dev/input/event9)
> [ 15.288] (**) Aiptek: Applying InputClass "evdev pointer catchall"
> [ 15.288] (**) Aiptek: Applying InputClass "evdev keyboard catchall"
> [ 15.288] (**) Aiptek: Applying InputClass "evdev tablet catchall"
> [ 15.288] (**) Aiptek: Applying InputClass "pen"
> [ 15.288] (II) LoadModule: "aiptek"
> [ 15.288] (II) Loading /usr/lib/xorg/modules/input/aiptek_drv.so
> [ 15.288] (II) Module aiptek: vendor="X.Org Foundation"
> [ 15.288] compiled for 1.10.2, module version = 1.4.1
> [ 15.288] Module class: X.Org XInput Driver
> [ 15.288] ABI class: X.Org XInput driver, version 12.3
> [ 15.288] (II) Using input driver 'aiptek' for 'Aiptek'
> [ 15.288] (II) Loading /usr/lib/xorg/modules/input/aiptek_drv.so
> [ 15.288] (**) Aiptek: always reports core events
> [ 15.288] (II) xf86AiptekInit(): begins
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and
> Power Button
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and
> Video Bus
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and
> Power Button
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and Eee
> PC WMI hotkeys
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and USB
> USB Keykoard
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and
> Logitech USB-PS/2 Optical Mouse
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and USB
> USB Keykoard
> [ 15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and Aiptek
> [ 15.288] (**) Aiptek: always reports core events
> [ 15.288] (**) Option "Device" "/dev/input/event9"
> [ 15.288] (--) HID Device name: "Aiptek"
> [ 15.288] (--) HID Driver Version: 1.0.1
> [ 15.288] (--) HID Driver knows it has 1 devices configured
> [ 15.288] (--) HID Driver is using 23 as the fd
> [ 15.289] (EE) From ioctl() xCapacity=2999
> [ 15.289] (EE) From ioctl() yCapacity=2249
> [ 15.412] (**) Aiptek device is /dev/input/event9
> [ 15.412] (**) Option "DebugLevel" "2"
> [ 15.412] (**) Debug level set to 2
> [ 15.412] (**) Aiptek is in absolute mode
> [ 15.412] (**) Option "USB" "on"
> [ 15.412] (**) Aiptek: reading USB link
> [ 15.412] (**) Option "ZMax" "511"
> [ 15.412] (**) Aiptek: ZMax/MaxZ = 511
> [ 15.412] (**) Option "ZMin" "0"
> [ 15.412] (**) Aiptek: ZMin/MinZ = 0
> [ 15.412] (**) Option "BaudRate" "9600"
> [ 15.412] (**) Aiptek: BaudRate 9600
> [ 15.412] (**) Aiptek: xf86AiptekInit() finished
> [ 15.412] (**) Option "config_info"
> "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9/event9"
> [ 15.412] (II) XINPUT: Adding extended input device "Aiptek" (type:
> Stylus)
> [ 15.412] (II) xf86AiptekProc() type=stylus flags=65 request=0
> [ 15.412] (II) xf86AiptekProc request=INIT
> [ 15.412] (II) xf86AiptekControlProc
> [ 15.412] (II) In xf86AiptekOpenDevice, with fd=-1
> [ 15.412] (--) HID Device name: "Aiptek"
> [ 15.412] (--) HID Driver Version: 1.0.1
> [ 15.412] (--) HID Driver knows it has 1 devices configured
> [ 15.412] (--) HID Driver is using 23 as the fd
> [ 15.412] (--) HID Driver is using 23 as the fd
> [ 15.412] (EE) From ioctl() xCapacity=2999
> [ 15.412] (EE) From ioctl() yCapacity=2249
> [ 15.412] (**) xTop invalid; adjusted to 0
> [ 15.412] (**) yTop invalid; adjusted to 0
> [ 15.412] (**) xBottom invalid; adjusted to 2999
> [ 15.412] (**) yBottom invalid; adjusted to 2249
> [ 15.412] (**) ScreenNo invalid; adjusted to 0
> [ 15.412] (II) xf86AiptekProc Success request=0
> [ 15.412] (**) Aiptek: (accel) keeping acceleration scheme 1
> [ 15.412] (**) Aiptek: (accel) acceleration profile 0
> [ 15.412] (**) Aiptek: (accel) acceleration factor: 2.000
> [ 15.412] (**) Aiptek: (accel) acceleration threshold: 4
> [ 15.412] (II) xf86AiptekProc() type=stylus flags=65 request=1
> [ 15.412] (II) xf86AiptekProc request=ON
> [ 15.412] (II) Able to open aiptek device
> [ 15.412] (II) xf86AiptekProc Success request=1
>
>
>
> On 09/11/11 21:41, Bjorn Wielens wrote:
>  > Sadly, no luck.
>  >
>  > I plug it in and it just works straight away in absolute mode.
>  >
>  > Can you check the contents of
>  > /etc/X11/xorg.conf.d/<somenumber>-aiptek.conf? Mine has the following
>  > content:
>  >
>  > Section "InputClass"
>  > Identifier "pen"
>  > MatchProduct "Aiptek|AIPTEK|aiptek"
>  > MatchDevicePath "/dev/input/event*"
>  > Driver "aiptek"
>  > Option "SendCoreEvents" "true"
>  > Option "USB" "on"
>  > Option "Type" "stylus"
>  > Option "Mode" "absolute"
>  > Option "zMin" "0"
>  > Option "zMax" "511"
>  >
>  >
>  > Also, can you obtain and install evtest, and paste some output from the
>  > tablet's /dev/input/eventX file when you wave the pen over it?
>  > That might reveal some interesting info.
>  >
>  > Bjorn.
>  >
>  >
>  > On 11/09/2011 02:32 PM, Ian Prideaux wrote:
>  >> On 09/11/11 18:12, Bjorn Wielens wrote:
>  >>> dmesg | grep -i aiptek
>  >>
>  >> [ 15.639534] aiptek 1-1.1:1.0: Aiptek using 400 ms programming speed
>  >> [ 15.639599] input: Aiptek as
>  >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9
>  >> [ 15.639719] usbcore: registered new interface driver aiptek
>  >> [ 15.639720] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet
>  >> Driver (Linux 2.6.x)
>  >> [ 15.639722] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene
>  >> van Paassen
>  >>

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Bjorn W. <uni...@ya...>]

Nothing seems to indicate something's wrong with what you've pasted below...
Any luck with the evtest output?

Bjorn.'



________________________________
From: Ian Prideaux <ia...@ne...>
To: aip...@li...
Sent: Thursday, November 10, 2011 2:07:35 PM
Subject: Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10


Apparently the SendCoreEvents has been deprecated for a few years, but 
it makes no difference whether it's commented in or out.

Section "InputClass"
    Identifier "pen"
    MatchProduct "Aiptek|AIPTEK|aiptek"
    MatchDevicePath "/dev/input/event*"
    Driver "aiptek"
    #Option "SendCoreEvents" "true"
    Option "USB" "on"
    Option "Type" "stylus"
    Option "Mode" "absolute"
    Option "zMin" "0"
    Option "zMax" "511"
    Option "zMax" "511"
    Option "DebugLevel" "2"
EndSection

I've increased the DebugLevel, it seems to add some info to
/var/log/Xorg.0.log but I don't know that it's particularly helpful. 
I'll try increasing the number some more.

[    15.288] (II) config/udev: Adding input device Aiptek 
(/dev/input/mouse1)
[    15.288] (II) No input driver/identifier specified (ignoring)
[    15.288] (II) config/udev: Adding input device Aiptek 
(/dev/input/event9)
[    15.288] (**) Aiptek: Applying InputClass "evdev pointer catchall"
[    15.288] (**) Aiptek: Applying InputClass "evdev keyboard catchall"
[    15.288] (**) Aiptek: Applying InputClass "evdev tablet catchall"
[    15.288] (**) Aiptek: Applying InputClass "pen"
[    15.288] (II) LoadModule: "aiptek"
[    15.288] (II) Loading /usr/lib/xorg/modules/input/aiptek_drv.so
[    15.288] (II) Module aiptek: vendor="X.Org Foundation"
[    15.288]    compiled for 1.10.2, module version = 1.4.1
[    15.288]    Module class: X.Org XInput Driver
[    15.288]    ABI class: X.Org XInput driver, version 12.3
[    15.288] (II) Using input driver 'aiptek' for 'Aiptek'
[    15.288] (II) Loading /usr/lib/xorg/modules/input/aiptek_drv.so
[    15.288] (**) Aiptek: always reports core events
[    15.288] (II) xf86AiptekInit(): begins
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and 
Power Button
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and 
Video Bus
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and 
Power Button
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and Eee 
PC WMI hotkeys
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and USB 
USB Keykoard
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and 
Logitech USB-PS/2 Optical Mouse
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and USB 
USB Keykoard
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and Aiptek
[    15.288] (**) Aiptek: always reports core events
[    15.288] (**) Option "Device" "/dev/input/event9"
[    15.288] (--) HID Device name: "Aiptek"
[    15.288] (--) HID Driver Version: 1.0.1
[    15.288] (--) HID Driver knows it has 1 devices configured
[    15.288] (--) HID Driver is using 23 as the fd
[    15.289] (EE) From ioctl() xCapacity=2999
[    15.289] (EE) From ioctl() yCapacity=2249
[    15.412] (**) Aiptek device is /dev/input/event9
[    15.412] (**) Option "DebugLevel" "2"
[    15.412] (**) Debug level set to 2
[    15.412] (**) Aiptek is in absolute mode
[    15.412] (**) Option "USB" "on"
[    15.412] (**) Aiptek: reading USB link
[    15.412] (**) Option "ZMax" "511"
[    15.412] (**) Aiptek: ZMax/MaxZ = 511
[    15.412] (**) Option "ZMin" "0"
[    15.412] (**) Aiptek: ZMin/MinZ = 0
[    15.412] (**) Option "BaudRate" "9600"
[    15.412] (**) Aiptek: BaudRate 9600
[    15.412] (**) Aiptek: xf86AiptekInit() finished
[    15.412] (**) Option "config_info" 
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9/event9"
[    15.412] (II) XINPUT: Adding extended input device "Aiptek" (type: 
Stylus)
[    15.412] (II) xf86AiptekProc() type=stylus flags=65 request=0
[    15.412] (II) xf86AiptekProc request=INIT
[    15.412] (II) xf86AiptekControlProc
[    15.412] (II) In xf86AiptekOpenDevice, with fd=-1
[    15.412] (--) HID Device name: "Aiptek"
[    15.412] (--) HID Driver Version: 1.0.1
[    15.412] (--) HID Driver knows it has 1 devices configured
[    15.412] (--) HID Driver is using 23 as the fd
[    15.412] (--) HID Driver is using 23 as the fd
[    15.412] (EE) From ioctl() xCapacity=2999
[    15.412] (EE) From ioctl() yCapacity=2249
[    15.412] (**) xTop invalid; adjusted to 0
[    15.412] (**) yTop invalid; adjusted to 0
[    15.412] (**) xBottom invalid; adjusted to 2999
[    15.412] (**) yBottom invalid; adjusted to 2249
[    15.412] (**) ScreenNo invalid; adjusted to 0
[    15.412] (II) xf86AiptekProc Success request=0
[    15.412] (**) Aiptek: (accel) keeping acceleration scheme 1
[    15.412] (**) Aiptek: (accel) acceleration profile 0
[    15.412] (**) Aiptek: (accel) acceleration factor: 2.000
[    15.412] (**) Aiptek: (accel) acceleration threshold: 4
[    15.412] (II) xf86AiptekProc() type=stylus flags=65 request=1
[    15.412] (II) xf86AiptekProc request=ON
[    15.412] (II) Able to open aiptek device
[    15.412] (II) xf86AiptekProc Success request=1



On 09/11/11 21:41, Bjorn Wielens wrote:
> Sadly, no luck.
>
> I plug it in and it just works straight away in absolute mode.
>
> Can you check the contents of
> /etc/X11/xorg.conf.d/<somenumber>-aiptek.conf? Mine has the following
> content:
>
> Section "InputClass"
>          Identifier "pen"
>          MatchProduct "Aiptek|AIPTEK|aiptek"
>          MatchDevicePath "/dev/input/event*"
>          Driver "aiptek"
>          Option "SendCoreEvents" "true"
>          Option "USB" "on"
>          Option "Type" "stylus"
>          Option "Mode" "absolute"
>          Option "zMin" "0"
>          Option "zMax" "511"
>
>
> Also, can you obtain and install evtest, and paste some output from the
> tablet's /dev/input/eventX file when you wave the pen over it?
> That might reveal some interesting info.
>
> Bjorn.
>
>
> On 11/09/2011 02:32 PM, Ian Prideaux wrote:
>> On 09/11/11 18:12, Bjorn Wielens wrote:
>>> dmesg | grep -i aiptek
>>
>> [   15.639534] aiptek 1-1.1:1.0: Aiptek using 400 ms programming speed
>> [   15.639599] input: Aiptek as
>> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9
>> [   15.639719] usbcore: registered new interface driver aiptek
>> [   15.639720] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet
>> Driver (Linux 2.6.x)
>> [   15.639722] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene
>> van Paassen
>>
>>
>>
>> ------------------------------------------------------------------------------
>> RSA(R) Conference 2012
>> Save $700 by Nov 18
>> Register now
>> http://p.sf.net/sfu/rsa-sfdev2dev1
>>
>>
>>
>> _______________________________________________
>> Aiptektablet-users mailing list
>> Aip...@li...
>> https://lists.sourceforge.net/lists/listinfo/aiptektablet-users
>
>
>
> ------------------------------------------------------------------------------
> RSA(R) Conference 2012
> Save $700 by Nov 18
> Register now
> http://p.sf.net/sfu/rsa-sfdev2dev1
>
>
>
> _______________________________________________
> Aiptektablet-users mailing list
> Aip...@li...
> https://lists.sourceforge.net/lists/listinfo/aiptektablet-users


------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
Aiptektablet-users mailing list
Aip...@li...
https://lists.sourceforge.net/lists/listinfo/aiptektablet-users

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Ian P. <ia...@ne...>]

Apparently the SendCoreEvents has been deprecated for a few years, but 
it makes no difference whether it's commented in or out.

Section "InputClass"
	Identifier "pen"
	MatchProduct "Aiptek|AIPTEK|aiptek"
	MatchDevicePath "/dev/input/event*"
	Driver "aiptek"
	#Option "SendCoreEvents" "true"
	Option "USB" "on"
	Option "Type" "stylus"
	Option "Mode" "absolute"
	Option "zMin" "0"
	Option "zMax" "511"
	Option "zMax" "511"
	Option "DebugLevel" "2"
EndSection

I've increased the DebugLevel, it seems to add some info to
/var/log/Xorg.0.log but I don't know that it's particularly helpful. 
I'll try increasing the number some more.

[    15.288] (II) config/udev: Adding input device Aiptek 
(/dev/input/mouse1)
[    15.288] (II) No input driver/identifier specified (ignoring)
[    15.288] (II) config/udev: Adding input device Aiptek 
(/dev/input/event9)
[    15.288] (**) Aiptek: Applying InputClass "evdev pointer catchall"
[    15.288] (**) Aiptek: Applying InputClass "evdev keyboard catchall"
[    15.288] (**) Aiptek: Applying InputClass "evdev tablet catchall"
[    15.288] (**) Aiptek: Applying InputClass "pen"
[    15.288] (II) LoadModule: "aiptek"
[    15.288] (II) Loading /usr/lib/xorg/modules/input/aiptek_drv.so
[    15.288] (II) Module aiptek: vendor="X.Org Foundation"
[    15.288]    compiled for 1.10.2, module version = 1.4.1
[    15.288]    Module class: X.Org XInput Driver
[    15.288]    ABI class: X.Org XInput driver, version 12.3
[    15.288] (II) Using input driver 'aiptek' for 'Aiptek'
[    15.288] (II) Loading /usr/lib/xorg/modules/input/aiptek_drv.so
[    15.288] (**) Aiptek: always reports core events
[    15.288] (II) xf86AiptekInit(): begins
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and 
Power Button
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and 
Video Bus
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and 
Power Button
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and Eee 
PC WMI hotkeys
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and USB 
USB Keykoard
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and 
Logitech USB-PS/2 Optical Mouse
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and USB 
USB Keykoard
[    15.288] (**) xf86AiptekConfig: device not shared btw Aiptek and Aiptek
[    15.288] (**) Aiptek: always reports core events
[    15.288] (**) Option "Device" "/dev/input/event9"
[    15.288] (--) HID Device name: "Aiptek"
[    15.288] (--) HID Driver Version: 1.0.1
[    15.288] (--) HID Driver knows it has 1 devices configured
[    15.288] (--) HID Driver is using 23 as the fd
[    15.289] (EE) From ioctl() xCapacity=2999
[    15.289] (EE) From ioctl() yCapacity=2249
[    15.412] (**) Aiptek device is /dev/input/event9
[    15.412] (**) Option "DebugLevel" "2"
[    15.412] (**) Debug level set to 2
[    15.412] (**) Aiptek is in absolute mode
[    15.412] (**) Option "USB" "on"
[    15.412] (**) Aiptek: reading USB link
[    15.412] (**) Option "ZMax" "511"
[    15.412] (**) Aiptek: ZMax/MaxZ = 511
[    15.412] (**) Option "ZMin" "0"
[    15.412] (**) Aiptek: ZMin/MinZ = 0
[    15.412] (**) Option "BaudRate" "9600"
[    15.412] (**) Aiptek: BaudRate 9600
[    15.412] (**) Aiptek: xf86AiptekInit() finished
[    15.412] (**) Option "config_info" 
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9/event9"
[    15.412] (II) XINPUT: Adding extended input device "Aiptek" (type: 
Stylus)
[    15.412] (II) xf86AiptekProc() type=stylus flags=65 request=0
[    15.412] (II) xf86AiptekProc request=INIT
[    15.412] (II) xf86AiptekControlProc
[    15.412] (II) In xf86AiptekOpenDevice, with fd=-1
[    15.412] (--) HID Device name: "Aiptek"
[    15.412] (--) HID Driver Version: 1.0.1
[    15.412] (--) HID Driver knows it has 1 devices configured
[    15.412] (--) HID Driver is using 23 as the fd
[    15.412] (--) HID Driver is using 23 as the fd
[    15.412] (EE) From ioctl() xCapacity=2999
[    15.412] (EE) From ioctl() yCapacity=2249
[    15.412] (**) xTop invalid; adjusted to 0
[    15.412] (**) yTop invalid; adjusted to 0
[    15.412] (**) xBottom invalid; adjusted to 2999
[    15.412] (**) yBottom invalid; adjusted to 2249
[    15.412] (**) ScreenNo invalid; adjusted to 0
[    15.412] (II) xf86AiptekProc Success request=0
[    15.412] (**) Aiptek: (accel) keeping acceleration scheme 1
[    15.412] (**) Aiptek: (accel) acceleration profile 0
[    15.412] (**) Aiptek: (accel) acceleration factor: 2.000
[    15.412] (**) Aiptek: (accel) acceleration threshold: 4
[    15.412] (II) xf86AiptekProc() type=stylus flags=65 request=1
[    15.412] (II) xf86AiptekProc request=ON
[    15.412] (II) Able to open aiptek device
[    15.412] (II) xf86AiptekProc Success request=1



On 09/11/11 21:41, Bjorn Wielens wrote:
> Sadly, no luck.
>
> I plug it in and it just works straight away in absolute mode.
>
> Can you check the contents of
> /etc/X11/xorg.conf.d/<somenumber>-aiptek.conf? Mine has the following
> content:
>
> Section "InputClass"
>          Identifier "pen"
>          MatchProduct "Aiptek|AIPTEK|aiptek"
>          MatchDevicePath "/dev/input/event*"
>          Driver "aiptek"
>          Option "SendCoreEvents" "true"
>          Option "USB" "on"
>          Option "Type" "stylus"
>          Option "Mode" "absolute"
>          Option "zMin" "0"
>          Option "zMax" "511"
>
>
> Also, can you obtain and install evtest, and paste some output from the
> tablet's /dev/input/eventX file when you wave the pen over it?
> That might reveal some interesting info.
>
> Bjorn.
>
>
> On 11/09/2011 02:32 PM, Ian Prideaux wrote:
>> On 09/11/11 18:12, Bjorn Wielens wrote:
>>> dmesg | grep -i aiptek
>>
>> [   15.639534] aiptek 1-1.1:1.0: Aiptek using 400 ms programming speed
>> [   15.639599] input: Aiptek as
>> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9
>> [   15.639719] usbcore: registered new interface driver aiptek
>> [   15.639720] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet
>> Driver (Linux 2.6.x)
>> [   15.639722] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene
>> van Paassen
>>
>>
>>
>> ------------------------------------------------------------------------------
>> RSA(R) Conference 2012
>> Save $700 by Nov 18
>> Register now
>> http://p.sf.net/sfu/rsa-sfdev2dev1
>>
>>
>>
>> _______________________________________________
>> Aiptektablet-users mailing list
>> Aip...@li...
>> https://lists.sourceforge.net/lists/listinfo/aiptektablet-users
>
>
>
> ------------------------------------------------------------------------------
> RSA(R) Conference 2012
> Save $700 by Nov 18
> Register now
> http://p.sf.net/sfu/rsa-sfdev2dev1
>
>
>
> _______________________________________________
> Aiptektablet-users mailing list
> Aip...@li...
> https://lists.sourceforge.net/lists/listinfo/aiptektablet-users

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Bjorn W. <Uni...@ya...>]

Sadly, no luck.

I plug it in and it just works straight away in absolute mode.

Can you check the contents of
/etc/X11/xorg.conf.d/<somenumber>-aiptek.conf? Mine has the following
content:

Section "InputClass"
        Identifier "pen"
        MatchProduct "Aiptek|AIPTEK|aiptek"
        MatchDevicePath "/dev/input/event*"
        Driver "aiptek"
        Option "SendCoreEvents" "true"
        Option "USB" "on"
        Option "Type" "stylus"
        Option "Mode" "absolute"
        Option "zMin" "0"
        Option "zMax" "511"


Also, can you obtain and install evtest, and paste some output from the
tablet's /dev/input/eventX file when you wave the pen over it?
That might reveal some interesting info.

Bjorn.


On 11/09/2011 02:32 PM, Ian Prideaux wrote:
> On 09/11/11 18:12, Bjorn Wielens wrote:
>> dmesg | grep -i aiptek
> 
> [   15.639534] aiptek 1-1.1:1.0: Aiptek using 400 ms programming speed
> [   15.639599] input: Aiptek as
> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9
> [   15.639719] usbcore: registered new interface driver aiptek
> [   15.639720] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet
> Driver (Linux 2.6.x)
> [   15.639722] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene
> van Paassen
> 
> 
> 
> ------------------------------------------------------------------------------
> RSA(R) Conference 2012
> Save $700 by Nov 18
> Register now
> http://p.sf.net/sfu/rsa-sfdev2dev1
> 
> 
> 
> _______________________________________________
> Aiptektablet-users mailing list
> Aip...@li...
> https://lists.sourceforge.net/lists/listinfo/aiptektablet-users

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Bjorn W. <uni...@ya...>]

This is getting weird.

When I get home from work I'll plug in my tablet and see what I have to do to get it working on my own machine.

Bjorn.



________________________________
From: Ian Prideaux <ia...@ne...>
To: aip...@li...
Sent: Wednesday, November 9, 2011 2:32:34 PM
Subject: Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

On 09/11/11 18:12, Bjorn Wielens wrote:
> dmesg | grep -i aiptek

[   15.639534] aiptek 1-1.1:1.0: Aiptek using 400 ms programming speed
[   15.639599] input: Aiptek as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9
[   15.639719] usbcore: registered new interface driver aiptek
[   15.639720] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
[   15.639722] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen


------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
Aiptektablet-users mailing list
Aip...@li...
https://lists.sourceforge.net/lists/listinfo/aiptektablet-users

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Ian P. <ia...@ne...>]

On 09/11/11 18:12, Bjorn Wielens wrote:
> dmesg | grep -i aiptek

[   15.639534] aiptek 1-1.1:1.0: Aiptek using 400 ms programming speed
[   15.639599] input: Aiptek as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9
[   15.639719] usbcore: registered new interface driver aiptek
[   15.639720] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet 
Driver (Linux 2.6.x)
[   15.639722] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene 
van Paassen

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Bjorn W. <uni...@ya...>]

Sadly my system doesn't have separate packages for the input drivers- all are included in xorg-driver-input, version 7.6

HOWEVER - this doesn't appear to be an Xorg issue- the relative reports is a sign of the KERNEL driver not being happy (which resides at /usr/src/linux/drivers/input/tablet/aiptek.c, if you have the kernel source installed.)

What is the output of 'dmesg | grep -i aiptek'?

Bjorn.



________________________________
From: Ian Prideaux <ia...@ne...>
To: aip...@li...
Sent: Wednesday, November 9, 2011 1:54:39 PM
Subject: Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

I need both config files to get even relative mode to work (and I have 
no pressure sensitivity, but that's another problem). I did try 1.3.99, 
but that didn't work any better than 1.4.1.

Here's my xorg packages:

xorg    1:7.6+7ubuntu7
xorg-docs-core    1:1.6-1ubuntu2
xserver-xorg    1:7.6+7ubuntu7
xserver-xorg-core    2:1.10.4-1ubuntu4.2
xserver-xorg-input-aiptek    1:1.4.1-1
xserver-xorg-input-all    1:7.6+7ubuntu7
xserver-xorg-input-evdev    1:2.6.0-1ubuntu13
xserver-xorg-input-mouse    1:1.7.1-1
xserver-xorg-input-synaptics    1.4.1-1ubuntu2
xserver-xorg-input-vmmouse    1:12.7.0-2
xserver-xorg-input-wacom    1:0.11.0-0ubuntu2
xserver-xorg-video-all    1:7.6+7ubuntu7
xserver-xorg-video-ati    1:6.14.99~git20110811.g93fc084-0ubuntu1
xserver-xorg-video-cirrus    1:1.3.2-2ubuntu7
xserver-xorg-video-fbdev    1:0.4.2-3ubuntu6
xserver-xorg-video-intel    2:2.15.901-1ubuntu2
xserver-xorg-video-mach64    6.9.0-1
xserver-xorg-video-mga    1:1.4.13.dfsg-3build1
xserver-xorg-video-neomagic    1:1.2.5-2
xserver-xorg-video-nouveau    1:0.0.16+git20110411+8378443-1
xserver-xorg-video-openchrome    1:0.2.904+svn920-1
xserver-xorg-video-qxl    0.0.14-1
xserver-xorg-video-r128    6.8.1-5
xserver-xorg-video-radeon    1:6.14.99~git20110811.g93fc084-0ubuntu1
xserver-xorg-video-s3    1:0.6.3-4
xserver-xorg-video-savage    1:2.3.2-3ubuntu2
xserver-xorg-video-siliconmotion    1:1.7.5-1
xserver-xorg-video-sis    1:0.10.3-3
xserver-xorg-video-sisusb    1:0.9.4-2
xserver-xorg-video-tdfx    1:1.4.3-4
xserver-xorg-video-trident    1:1.3.4-2
xserver-xorg-video-vesa    1:2.3.0-7
xserver-xorg-video-vmware    1:11.0.3-2


On 08/11/11 21:42, Bjorn Wielens wrote:
> You are correct, HAL is deprecated. I only have the UDEV rules file on
> my system. That should register the xorg driver in itself.
>
> Sadly, it's long enough ago that I don't have the foggiest idea what I
> did to get it working last time around.
>
> What version of xorg and the kernel driver do you have? Perhaps
> comparing will get us somewhere.
>
> Bjorn.
>
>
>
>
> On 11/08/2011 03:40 PM, Ian Prideaux wrote:
>> Hi Bjorn,
>>
>> That used to be the case, but Ubuntu>=10.04 stopped using HAL, and now
>> uses Udev. But yes, I've had to create
>> /usr/share/X11/xorg.conf.d/50-aiptek.conf
>> and
>> /lib/udev/rules.d/69-xserver-xorg-input-aiptek.rules
>> as well as install the xserver package.
>>
>> https://help.ubuntu.com/community/AiptekTablet
>>
>>
>> On 08/11/11 17:38, Bjorn Wielens wrote:
>>> If memory serves, you will also need to make an FDI rules file for the
>>> HAL daemon.
>>>
>>> Check your /etc/hal/fdi/policy for such a file. Mine was called
>>> 10-aiptek.fdi, and has the following contents:
>>>
>>> <?xml version="1.0" encoding="UTF-8"?>  <!-- -*- SGML -*- -->
>>> <!-- Aiptek: Medion Md9570; Trust Wireless Tablet TB-3100 -->
>>> <deviceinfo version="0.2">
>>> <device>
>>> <match key="info.product" contains="Aiptek">
>>> <merge key="input.x11_driver" type="string">aiptek</merge>
>>> <merge key="input.x11_options.Type" type="string">stylus</merge>
>>> <merge key="input.x11_options.USB" type="string">on</merge>
>>> <merge key="input.x11_options.debuglevel" type="string">20</merge>
>>> <merge key="input.x11_options.Mode" type="string">absolute</merge>
>>> <merge key="input.x11_options.SendCoreEvents" type="string">true</merge>
>>> <merge key="input.x11_options.zMin" type="string">0</merge>
>>> <merge key="input.x11_options.zMax" type="string">511</merge>
>>> <merge key="input.x11_options.zThreshold" type="string">50</merge>
>>> <merge key="input.x11_options.Pressure" type="string">linear</merge>
>>> <merge key="input.x11_options.KeepShape" type="string">On</merge>
>>> </match>
>>> </device>
>>> </deviceinfo>
>>>
>>> This tells X the correct driver to use for your tablet, and takes the
>>> place of having to do a config via xorg.conf.
>>>
>>> This config is from my laptop, so if that doesn't work, let me know- it
>>> means there might be a different setup on my desktop, as it's been a
>>> while since I had the tablet attached to my lappy.
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>> *From:* Ian Prideaux<ia...@ne...>
>>> *To:* aip...@li...
>>> *Sent:* Tuesday, November 8, 2011 1:16:09 PM
>>> *Subject:* Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10
>>>
>>> Hi Steve,
>>>
>>> xserver-xorg-input-aiptek 1:1.4.1-1 isn't included in the default
>>> install, but it is available direct from Ubuntu through synaptic.
>>>
>>> I'll try removing it and using an older version. IIRC 11.04 comes with
>>> 1.3.something, not 1.4
>>>
>>>
>>> On 08/11/11 10:01, steve wrote:
>>>   >  On Monday 07 Nov 2011 22:41:46 Ian Prideaux wrote:
>>>   >>  Hi All,
>>>   >>
>>>   >>  I've just installed Lubuntu 11.10
>>>   >>  (i.e. xserver-xorg-input-aiptek 1:1.4.1-1)
>>>   >>  and my Aiptek 6000 doesn't work.
>>>   >>
>>>   >>  If I set it to relative mode, then it's fine, but I don't like
>>> relative
>>>   >>  mode.
>>>   >>
>>>   >>  If I set it to absolute mode, then it doesn't work, the
>>> diagnostics say
>>>   >>  "Error: receiving relative reports". It's as if something is
>>> expecting
>>>   >>  to get relative data, even though I've told it to use absolute.
>>>   >>
>>>   >>  There was a piece in the wiki which seemed to suggest that it was
>>>   >>  because of the wrong delay time, it defaults to 400, but I've
>>> tried 50,
>>>   >>  25, 800&  1600, and it's still broken.
>>>   >>
>>>   >>  Any ideas?
>>>   >>
>>>   >>  Thanks.

------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
Aiptektablet-users mailing list
Aip...@li...
https://lists.sourceforge.net/lists/listinfo/aiptektablet-users

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Ian P. <ia...@ne...>]

I need both config files to get even relative mode to work (and I have 
no pressure sensitivity, but that's another problem). I did try 1.3.99, 
but that didn't work any better than 1.4.1.

Here's my xorg packages:

xorg	1:7.6+7ubuntu7
xorg-docs-core	1:1.6-1ubuntu2
xserver-xorg	1:7.6+7ubuntu7
xserver-xorg-core	2:1.10.4-1ubuntu4.2
xserver-xorg-input-aiptek	1:1.4.1-1
xserver-xorg-input-all	1:7.6+7ubuntu7
xserver-xorg-input-evdev	1:2.6.0-1ubuntu13
xserver-xorg-input-mouse	1:1.7.1-1
xserver-xorg-input-synaptics	1.4.1-1ubuntu2
xserver-xorg-input-vmmouse	1:12.7.0-2
xserver-xorg-input-wacom	1:0.11.0-0ubuntu2
xserver-xorg-video-all	1:7.6+7ubuntu7
xserver-xorg-video-ati	1:6.14.99~git20110811.g93fc084-0ubuntu1
xserver-xorg-video-cirrus	1:1.3.2-2ubuntu7
xserver-xorg-video-fbdev	1:0.4.2-3ubuntu6
xserver-xorg-video-intel	2:2.15.901-1ubuntu2
xserver-xorg-video-mach64	6.9.0-1
xserver-xorg-video-mga	1:1.4.13.dfsg-3build1
xserver-xorg-video-neomagic	1:1.2.5-2
xserver-xorg-video-nouveau	1:0.0.16+git20110411+8378443-1
xserver-xorg-video-openchrome	1:0.2.904+svn920-1
xserver-xorg-video-qxl	0.0.14-1
xserver-xorg-video-r128	6.8.1-5
xserver-xorg-video-radeon	1:6.14.99~git20110811.g93fc084-0ubuntu1
xserver-xorg-video-s3	1:0.6.3-4
xserver-xorg-video-savage	1:2.3.2-3ubuntu2
xserver-xorg-video-siliconmotion	1:1.7.5-1
xserver-xorg-video-sis	1:0.10.3-3
xserver-xorg-video-sisusb	1:0.9.4-2
xserver-xorg-video-tdfx	1:1.4.3-4
xserver-xorg-video-trident	1:1.3.4-2
xserver-xorg-video-vesa	1:2.3.0-7
xserver-xorg-video-vmware	1:11.0.3-2


On 08/11/11 21:42, Bjorn Wielens wrote:
> You are correct, HAL is deprecated. I only have the UDEV rules file on
> my system. That should register the xorg driver in itself.
>
> Sadly, it's long enough ago that I don't have the foggiest idea what I
> did to get it working last time around.
>
> What version of xorg and the kernel driver do you have? Perhaps
> comparing will get us somewhere.
>
> Bjorn.
>
>
>
>
> On 11/08/2011 03:40 PM, Ian Prideaux wrote:
>> Hi Bjorn,
>>
>> That used to be the case, but Ubuntu>=10.04 stopped using HAL, and now
>> uses Udev. But yes, I've had to create
>> /usr/share/X11/xorg.conf.d/50-aiptek.conf
>> and
>> /lib/udev/rules.d/69-xserver-xorg-input-aiptek.rules
>> as well as install the xserver package.
>>
>> https://help.ubuntu.com/community/AiptekTablet
>>
>>
>> On 08/11/11 17:38, Bjorn Wielens wrote:
>>> If memory serves, you will also need to make an FDI rules file for the
>>> HAL daemon.
>>>
>>> Check your /etc/hal/fdi/policy for such a file. Mine was called
>>> 10-aiptek.fdi, and has the following contents:
>>>
>>> <?xml version="1.0" encoding="UTF-8"?>  <!-- -*- SGML -*- -->
>>> <!-- Aiptek: Medion Md9570; Trust Wireless Tablet TB-3100 -->
>>> <deviceinfo version="0.2">
>>> <device>
>>> <match key="info.product" contains="Aiptek">
>>> <merge key="input.x11_driver" type="string">aiptek</merge>
>>> <merge key="input.x11_options.Type" type="string">stylus</merge>
>>> <merge key="input.x11_options.USB" type="string">on</merge>
>>> <merge key="input.x11_options.debuglevel" type="string">20</merge>
>>> <merge key="input.x11_options.Mode" type="string">absolute</merge>
>>> <merge key="input.x11_options.SendCoreEvents" type="string">true</merge>
>>> <merge key="input.x11_options.zMin" type="string">0</merge>
>>> <merge key="input.x11_options.zMax" type="string">511</merge>
>>> <merge key="input.x11_options.zThreshold" type="string">50</merge>
>>> <merge key="input.x11_options.Pressure" type="string">linear</merge>
>>> <merge key="input.x11_options.KeepShape" type="string">On</merge>
>>> </match>
>>> </device>
>>> </deviceinfo>
>>>
>>> This tells X the correct driver to use for your tablet, and takes the
>>> place of having to do a config via xorg.conf.
>>>
>>> This config is from my laptop, so if that doesn't work, let me know- it
>>> means there might be a different setup on my desktop, as it's been a
>>> while since I had the tablet attached to my lappy.
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>> *From:* Ian Prideaux<ia...@ne...>
>>> *To:* aip...@li...
>>> *Sent:* Tuesday, November 8, 2011 1:16:09 PM
>>> *Subject:* Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10
>>>
>>> Hi Steve,
>>>
>>> xserver-xorg-input-aiptek 1:1.4.1-1 isn't included in the default
>>> install, but it is available direct from Ubuntu through synaptic.
>>>
>>> I'll try removing it and using an older version. IIRC 11.04 comes with
>>> 1.3.something, not 1.4
>>>
>>>
>>> On 08/11/11 10:01, steve wrote:
>>>   >  On Monday 07 Nov 2011 22:41:46 Ian Prideaux wrote:
>>>   >>  Hi All,
>>>   >>
>>>   >>  I've just installed Lubuntu 11.10
>>>   >>  (i.e. xserver-xorg-input-aiptek 1:1.4.1-1)
>>>   >>  and my Aiptek 6000 doesn't work.
>>>   >>
>>>   >>  If I set it to relative mode, then it's fine, but I don't like
>>> relative
>>>   >>  mode.
>>>   >>
>>>   >>  If I set it to absolute mode, then it doesn't work, the
>>> diagnostics say
>>>   >>  "Error: receiving relative reports". It's as if something is
>>> expecting
>>>   >>  to get relative data, even though I've told it to use absolute.
>>>   >>
>>>   >>  There was a piece in the wiki which seemed to suggest that it was
>>>   >>  because of the wrong delay time, it defaults to 400, but I've
>>> tried 50,
>>>   >>  25, 800&  1600, and it's still broken.
>>>   >>
>>>   >>  Any ideas?
>>>   >>
>>>   >>  Thanks.

Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed

[Ian P. <ia...@ne...>]

Hi Keith,

And
http://dl.dropbox.com/u/48756408/Art_Dabbler.iso

935bdb8fe158ac4d699fd937a9365f9a  Art_Dabbler.iso
c259b40b4af621351ba69cdab7931912  HyperPen USB Series.iso


On 08/11/11 22:01, Keith Roberts wrote:
> Thanks for that Ian.
>
> Got it now, and the md5sum check is:
>
> c259b40b4af621351ba69cdab7931912  HyperPen-USB-Series.iso
>
> Is that right?
>
> Also, my Aiptek 6000 is the COM port version - not USB type.
> Does this make a difference with the programs?
>
> Kind Regards,
>
> Keith
>
> On Tue, 8 Nov 2011, Ian Prideaux wrote:
>
>> To: aip...@li...
>> From: Ian Prideaux<ia...@ne...>
>> Subject: Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed
>>
>> I think that I've figured it.
>> Keith, if you try to download
>> http://dl.dropbox.com/u/48756408/HyperPen%20USB%20Series.iso
>>
>>
>>
>>
>> On 08/11/11 20:43, Ian Prideaux wrote:
>>>   Hi Keith,
>>>
>>>   I'm doing the dropbox thing,as Bjorn suggested. According to
>>>   dropbox status
>>>   it'll take a couple of hours to complete.
>>>
>>>   Bjorn, how do I give Keith access to my dropbox folder?
>>>
>>>
>>>   On 08/11/11 20:30, Keith Roberts wrote:
>>>>   Hi Ian.
>>>>
>>>>   Thanks for your prompt reply. I'd like a copy of both the
>>>>   iso images please Ian.
>>>>
>>>>   If you can put them on a server somewhere with an md5
>>>>   checksum for each iso, then I can retrieve them using wget.
>>>>
>>>>   Also What OS are you on please, and do you have a fast DSL
>>>>   connection? Is it possible to do a direct machine<->  machine
>>>>   connection using ftp or similar?
>>>>
>>>>   I've got proftpd running on my machine for LAN connections,
>>>>   so I could open that to the outside world for you to do
>>>>   an ftp upload here to my machine. Done it on Windows and
>>>>   Centos laptops before, to move files from laptops to
>>>>   my main machine.
>>>>
>>>>   There is also TeamWeaver that allows Remote Desktop
>>>>   connections, and allows users to transfer files as
>>>>   well. Not done the TeamWeaver file transfers yet though - I
>>>>   only found out about it last night!
>>>>
>>>>   http://www.teamviewer.com/en/download/index.aspx
>>>>
>>>>   TIA
>>>>
>>>>   Keith
>>>>
>>>>   On Tue, 8 Nov 2011, Ian Prideaux wrote:
>>>>
>>>>>   To: aip...@li...
>>>>>   From: Ian Prideaux<ia...@ne...>
>>>>>   Subject: Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed
>>>>>
>>>>>   Hi Keith,
>>>>>
>>>>>   I've got two CDs in the box, one is Application Software, and the
>>>>>   other is
>>>>>   Corel Art Dabler (dated May 22 2000, jees I fell old :-). How best to
>>>>>   get
>>>>>   them to you? Do you (or anyone else on this list) have somewhere I
>>>>>   could
>>>>>   upload the isos? BitTorrent?
>>>>>
>>>>>
>>>>>   On 08/11/11 18:05, Keith Roberts wrote:
>>>>>>   Please forgive me for posting this again, but I need the
>>>>>>   original CD - or a copy thereof - that came with the Aiptek
>>>>>>   6000. Does anyone have or know where I can get a copy of
>>>>>>   this please?
>>>>>>
>>>>>>   Even the iso image would be OK, as I can then burn the image
>>>>>>   to a CD disk.
>>>>>>
>>>>>>   Kind REgards,
>>>>>>
>>>>>>   Keith Roberts
>>>>>>
>>
>>
>>
>>
>

Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed

[Keith R. <ke...@ka...>]

Thanks for that Ian.

Got it now, and the md5sum check is:

c259b40b4af621351ba69cdab7931912  HyperPen-USB-Series.iso

Is that right?

Also, my Aiptek 6000 is the COM port version - not USB type. 
Does this make a difference with the programs?

Kind Regards,

Keith

On Tue, 8 Nov 2011, Ian Prideaux wrote:

> To: aip...@li...
> From: Ian Prideaux <ia...@ne...>
> Subject: Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed
> 
> I think that I've figured it.
> Keith, if you try to download
> http://dl.dropbox.com/u/48756408/HyperPen%20USB%20Series.iso
>
>
>
>
> On 08/11/11 20:43, Ian Prideaux wrote:
>>  Hi Keith,
>>
>>  I'm doing the dropbox thing,as Bjorn suggested. According to
>>  dropbox status
>>  it'll take a couple of hours to complete.
>>
>>  Bjorn, how do I give Keith access to my dropbox folder?
>> 
>>
>>  On 08/11/11 20:30, Keith Roberts wrote:
>> >  Hi Ian.
>> > 
>> >  Thanks for your prompt reply. I'd like a copy of both the
>> >  iso images please Ian.
>> > 
>> >  If you can put them on a server somewhere with an md5
>> >  checksum for each iso, then I can retrieve them using wget.
>> > 
>> >  Also What OS are you on please, and do you have a fast DSL
>> >  connection? Is it possible to do a direct machine<-> machine
>> >  connection using ftp or similar?
>> > 
>> >  I've got proftpd running on my machine for LAN connections,
>> >  so I could open that to the outside world for you to do
>> >  an ftp upload here to my machine. Done it on Windows and
>> >  Centos laptops before, to move files from laptops to
>> >  my main machine.
>> > 
>> >  There is also TeamWeaver that allows Remote Desktop
>> >  connections, and allows users to transfer files as
>> >  well. Not done the TeamWeaver file transfers yet though - I
>> >  only found out about it last night!
>> > 
>> >  http://www.teamviewer.com/en/download/index.aspx
>> > 
>> >  TIA
>> > 
>> >  Keith
>> > 
>> >  On Tue, 8 Nov 2011, Ian Prideaux wrote:
>> > 
>> > >  To: aip...@li...
>> > >  From: Ian Prideaux<ia...@ne...>
>> > >  Subject: Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed
>> > > 
>> > >  Hi Keith,
>> > > 
>> > >  I've got two CDs in the box, one is Application Software, and the
>> > >  other is
>> > >  Corel Art Dabler (dated May 22 2000, jees I fell old :-). How best to
>> > >  get
>> > >  them to you? Do you (or anyone else on this list) have somewhere I 
>> > >  could
>> > >  upload the isos? BitTorrent?
>> > > 
>> > > 
>> > >  On 08/11/11 18:05, Keith Roberts wrote:
>> > > >  Please forgive me for posting this again, but I need the
>> > > >  original CD - or a copy thereof - that came with the Aiptek
>> > > >  6000. Does anyone have or know where I can get a copy of
>> > > >  this please?
>> > > > 
>> > > >  Even the iso image would be OK, as I can then burn the image
>> > > >  to a CD disk.
>> > > > 
>> > > >  Kind REgards,
>> > > > 
>> > > >  Keith Roberts
>> > > > 
>
>
>
>

-- 
-----------------------------------------------------------
Websites:
http://www.karsites.net
http://www.php-debuggers.net
http://www.raised-from-the-dead.org.uk

All email addresses are challenge-response protected with
TMDA [http://tmda.net]
-----------------------------------------------------------

Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10

[Bjorn W. <Uni...@ya...>]

You are correct, HAL is deprecated. I only have the UDEV rules file on
my system. That should register the xorg driver in itself.

Sadly, it's long enough ago that I don't have the foggiest idea what I
did to get it working last time around.

What version of xorg and the kernel driver do you have? Perhaps
comparing will get us somewhere.

Bjorn.




On 11/08/2011 03:40 PM, Ian Prideaux wrote:
> Hi Bjorn,
> 
> That used to be the case, but Ubuntu >=10.04 stopped using HAL, and now
> uses Udev. But yes, I've had to create
> /usr/share/X11/xorg.conf.d/50-aiptek.conf
> and
> /lib/udev/rules.d/69-xserver-xorg-input-aiptek.rules
> as well as install the xserver package.
> 
> https://help.ubuntu.com/community/AiptekTablet
> 
> 
> On 08/11/11 17:38, Bjorn Wielens wrote:
>> If memory serves, you will also need to make an FDI rules file for the
>> HAL daemon.
>>
>> Check your /etc/hal/fdi/policy for such a file. Mine was called
>> 10-aiptek.fdi, and has the following contents:
>>
>> <?xml version="1.0" encoding="UTF-8"?> <!-- -*- SGML -*- -->
>> <!-- Aiptek: Medion Md9570; Trust Wireless Tablet TB-3100 -->
>> <deviceinfo version="0.2">
>> <device>
>> <match key="info.product" contains="Aiptek">
>> <merge key="input.x11_driver" type="string">aiptek</merge>
>> <merge key="input.x11_options.Type" type="string">stylus</merge>
>> <merge key="input.x11_options.USB" type="string">on</merge>
>> <merge key="input.x11_options.debuglevel" type="string">20</merge>
>> <merge key="input.x11_options.Mode" type="string">absolute</merge>
>> <merge key="input.x11_options.SendCoreEvents" type="string">true </merge>
>> <merge key="input.x11_options.zMin" type="string">0</merge>
>> <merge key="input.x11_options.zMax" type="string">511</merge>
>> <merge key="input.x11_options.zThreshold" type="string">50</merge>
>> <merge key="input.x11_options.Pressure" type="string">linear</merge>
>> <merge key="input.x11_options.KeepShape" type="string">On</merge>
>> </match>
>> </device>
>> </deviceinfo>
>>
>> This tells X the correct driver to use for your tablet, and takes the
>> place of having to do a config via xorg.conf.
>>
>> This config is from my laptop, so if that doesn't work, let me know- it
>> means there might be a different setup on my desktop, as it's been a
>> while since I had the tablet attached to my lappy.
>>
>>
>>
>> ------------------------------------------------------------------------
>> *From:* Ian Prideaux <ia...@ne...>
>> *To:* aip...@li...
>> *Sent:* Tuesday, November 8, 2011 1:16:09 PM
>> *Subject:* Re: [Aiptektablet-users] Aiptek 6000 in Lubuntu 11.10
>>
>> Hi Steve,
>>
>> xserver-xorg-input-aiptek 1:1.4.1-1 isn't included in the default
>> install, but it is available direct from Ubuntu through synaptic.
>>
>> I'll try removing it and using an older version. IIRC 11.04 comes with
>> 1.3.something, not 1.4
>>
>>
>> On 08/11/11 10:01, steve wrote:
>>  > On Monday 07 Nov 2011 22:41:46 Ian Prideaux wrote:
>>  >> Hi All,
>>  >>
>>  >> I've just installed Lubuntu 11.10
>>  >> (i.e. xserver-xorg-input-aiptek 1:1.4.1-1)
>>  >> and my Aiptek 6000 doesn't work.
>>  >>
>>  >> If I set it to relative mode, then it's fine, but I don't like
>> relative
>>  >> mode.
>>  >>
>>  >> If I set it to absolute mode, then it doesn't work, the
>> diagnostics say
>>  >> "Error: receiving relative reports". It's as if something is
>> expecting
>>  >> to get relative data, even though I've told it to use absolute.
>>  >>
>>  >> There was a piece in the wiki which seemed to suggest that it was
>>  >> because of the wrong delay time, it defaults to 400, but I've
>> tried 50,
>>  >> 25, 800& 1600, and it's still broken.
>>  >>
>>  >> Any ideas?
>>  >>
>>  >> Thanks.
>>  >
> 
> 
> ------------------------------------------------------------------------------
> RSA(R) Conference 2012
> Save $700 by Nov 18
> Register now
> http://p.sf.net/sfu/rsa-sfdev2dev1
> 
> 
> 
> _______________________________________________
> Aiptektablet-users mailing list
> Aip...@li...
> https://lists.sourceforge.net/lists/listinfo/aiptektablet-users

Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed

[Bjorn W. <Uni...@ya...>]

Hi Ian,
Once they've uploaded, copy them to your "public" folder.

From there, the menu for each file will contain an option to obtain a
"public" link to that file, which you can copy-paste in a message to Keith.

Cheers,
Bjorn.


On 11/08/2011 04:43 PM, Ian Prideaux wrote:
> Hi Keith,
> 
> I'm doing the dropbox thing,as Bjorn suggested. According to
> dropbox status
> it'll take a couple of hours to complete.
> 
> Bjorn, how do I give Keith access to my dropbox folder?
> 
> 
> On 08/11/11 20:30, Keith Roberts wrote:
>> Hi Ian.
>>
>> Thanks for your prompt reply. I'd like a copy of both the
>> iso images please Ian.
>>
>> If you can put them on a server somewhere with an md5
>> checksum for each iso, then I can retrieve them using wget.
>>
>> Also What OS are you on please, and do you have a fast DSL
>> connection? Is it possible to do a direct machine<->  machine
>> connection using ftp or similar?
>>
>> I've got proftpd running on my machine for LAN connections,
>> so I could open that to the outside world for you to do
>> an ftp upload here to my machine. Done it on Windows and
>> Centos laptops before, to move files from laptops to
>> my main machine.
>>
>> There is also TeamWeaver that allows Remote Desktop
>> connections, and allows users to transfer files as
>> well. Not done the TeamWeaver file transfers yet though - I
>> only found out about it last night!
>>
>> http://www.teamviewer.com/en/download/index.aspx
>>
>> TIA
>>
>> Keith
>>
>> On Tue, 8 Nov 2011, Ian Prideaux wrote:
>>
>>> To: aip...@li...
>>> From: Ian Prideaux<ia...@ne...>
>>> Subject: Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed
>>>
>>> Hi Keith,
>>>
>>> I've got two CDs in the box, one is Application Software, and the
>>> other is
>>> Corel Art Dabler (dated May 22 2000, jees I fell old :-). How best to
>>> get
>>> them to you? Do you (or anyone else on this list) have somewhere I could
>>> upload the isos? BitTorrent?
>>>
>>>
>>> On 08/11/11 18:05, Keith Roberts wrote:
>>>>   Please forgive me for posting this again, but I need the
>>>>   original CD - or a copy thereof - that came with the Aiptek
>>>>   6000. Does anyone have or know where I can get a copy of
>>>>   this please?
>>>>
>>>>   Even the iso image would be OK, as I can then burn the image
>>>>   to a CD disk.
>>>>
>>>>   Kind REgards,
>>>>
>>>>   Keith Roberts
>>>>
>>>
>>>
>>>
>>
> 
> 
> 
> ------------------------------------------------------------------------------
> RSA(R) Conference 2012
> Save $700 by Nov 18
> Register now
> http://p.sf.net/sfu/rsa-sfdev2dev1
> 
> 
> 
> _______________________________________________
> Aiptektablet-users mailing list
> Aip...@li...
> https://lists.sourceforge.net/lists/listinfo/aiptektablet-users

Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed

[Ian P. <ia...@ne...>]

I think that I've figured it.
Keith, if you try to download
http://dl.dropbox.com/u/48756408/HyperPen%20USB%20Series.iso




On 08/11/11 20:43, Ian Prideaux wrote:
> Hi Keith,
>
> I'm doing the dropbox thing,as Bjorn suggested. According to
> dropbox status
> it'll take a couple of hours to complete.
>
> Bjorn, how do I give Keith access to my dropbox folder?
>
>
> On 08/11/11 20:30, Keith Roberts wrote:
>> Hi Ian.
>>
>> Thanks for your prompt reply. I'd like a copy of both the
>> iso images please Ian.
>>
>> If you can put them on a server somewhere with an md5
>> checksum for each iso, then I can retrieve them using wget.
>>
>> Also What OS are you on please, and do you have a fast DSL
>> connection? Is it possible to do a direct machine<-> machine
>> connection using ftp or similar?
>>
>> I've got proftpd running on my machine for LAN connections,
>> so I could open that to the outside world for you to do
>> an ftp upload here to my machine. Done it on Windows and
>> Centos laptops before, to move files from laptops to
>> my main machine.
>>
>> There is also TeamWeaver that allows Remote Desktop
>> connections, and allows users to transfer files as
>> well. Not done the TeamWeaver file transfers yet though - I
>> only found out about it last night!
>>
>> http://www.teamviewer.com/en/download/index.aspx
>>
>> TIA
>>
>> Keith
>>
>> On Tue, 8 Nov 2011, Ian Prideaux wrote:
>>
>>> To: aip...@li...
>>> From: Ian Prideaux<ia...@ne...>
>>> Subject: Re: [Aiptektablet-users] Aiptek 6000 Windows CD needed
>>>
>>> Hi Keith,
>>>
>>> I've got two CDs in the box, one is Application Software, and the
>>> other is
>>> Corel Art Dabler (dated May 22 2000, jees I fell old :-). How best to
>>> get
>>> them to you? Do you (or anyone else on this list) have somewhere I could
>>> upload the isos? BitTorrent?
>>>
>>>
>>> On 08/11/11 18:05, Keith Roberts wrote:
>>>> Please forgive me for posting this again, but I need the
>>>> original CD - or a copy thereof - that came with the Aiptek
>>>> 6000. Does anyone have or know where I can get a copy of
>>>> this please?
>>>>
>>>> Even the iso image would be OK, as I can then burn the image
>>>> to a CD disk.
>>>>
>>>> Kind REgards,
>>>>
>>>> Keith Roberts
>>>>