From: Stefan H. <lis...@th...> - 2007-07-19 13:29:31
|
Sorry, haven't searched for eventually existing files there, thought you would post them in the mailing-list. The new patch is not much better, I think it lasts longer until get stuck, but happens after a few minutes. Dmesg says I should check the card's temperature, but it's okay! Also one time I got a kernel-crash, but can't collect information about it. here the last dmesg-lines: wlan3: TKIP decrypt failed for RX frame from 00:15:e9:5f:71:e3 (res=-2) wlan3: TKIP decrypt failed for RX frame from 00:15:e9:5f:71:e3 (res=-2) wlan3: TKIP decrypt failed for RX frame from 00:15:e9:5f:71:e3 (res=-2) wlan3: TKIP decrypt failed for RX frame from 00:15:e9:5f:71:e3 (res=-3) wlan3: TKIP decrypt failed for RX frame from 00:15:e9:5f:71:e3 (res=-1) wlan3: TKIP decrypt failed for RX frame from 00:15:e9:5f:71:e3 (res=-3) wlan3: TKIP decrypt failed for RX frame from 00:15:e9:5f:71:e3 (res=-3) phy0: tx error 0x20, buf 01! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry') phy0: tx error 0x20, buf 11! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry') phy0: tx error 0x20, buf 12! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry') phy0: several excessive Tx retry errors occurred, attempting to recalibrate radio. Radio drift might be caused by increasing card temperature, please check the card before it's too late! phy0: tx error 0x20, buf 15! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry') Jobs still to be run: 4 phy0: tx error 0x20, buf 04! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry') phy0: tx error 0x20, buf 05! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry') phy0: tx error 0x20, buf 06! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry') phy0: several excessive Tx retry errors occurred, attempting to recalibrate radio. Radio drift might be caused by increasing card temperature, please check the card before it's too late! phy0: tx error 0x20, buf 07! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry') Jobs still to be run: 4 phy0: tx error 0x20, buf 08! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry') phy0: tx error 0x20, buf 09! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry') phy0: tx error 0x20, buf 10! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry') phy0: several excessive Tx retry errors occurred, attempting to recalibrate radio. Radio drift might be caused by increasing card temperature, please check the card before it's too late! phy0: tx error 0x20, buf 11! (excessive Tx retries due to either distance too high or unable to Tx or Tx frame error - try changing 'iwconfig txpower XXX' or 'sens'itivity or 'retry') Jobs still to be run: 4 Thanks Stefan Jeff Williams schrieb: > > On Thu, 19 Jul 2007, Stefan Hellermann wrote: > >> Where can I get the latest patch? If you mean >> http://airgo.wdwconsulting.net/acx-mac80211-20070717.patch.bz2 > > Is there not an > http://airgo.wdwconsulting.net/acx-mac80211-20070718.patch.bz2 > ? > > Jeff > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > Acx100-devel mailing list > Acx...@li... > https://lists.sourceforge.net/lists/listinfo/acx100-devel |