From: SourceForge.net <no...@so...> - 2004-01-30 20:32:04
|
Bugs item #839170, was opened at 2003-11-10 13:04 Message generated for change (Comment added) made by andim2 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=543745&aid=839170&group_id=75380 Category: None Group: None >Status: Closed Resolution: None Priority: 5 Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: Association problem with pre5 (incompatible rates error) Initial Comment: The ap is DWL-2000AP, it does not associate with any combination of speeds ( from AP auto and all available fixed speeds) with or without 805.11g only, with or without long/short preamble. All the other things seem to work except for the association part. Some log pieces: Nov 10 12:21:41 obelix-3 kernel: Found ACX100-based wireless network card, phymem1:0x10800000, phymem2:0x10810000, irq:9, mem1:0xcfac9000, mem2:0xcfae3000 Nov 10 12:21:41 obelix-3 kernel: Allocating 6584, 19B8h bytes for wlandevice_t Nov 10 12:21:41 obelix-3 kernel: hw_unavailable = 1 Nov 10 12:21:41 obelix-3 kernel: reset hw_unavailable++ Nov 10 12:21:41 obelix-3 kernel: Allocated 40636 bytes for firmware module loading. Nov 10 12:21:41 obelix-3 kernel: acx100_write_fw (firmware): 1, acx100_validate_fw: 1 Nov 10 12:21:42 obelix-3 kernel: reset hw_unavailable-- Nov 10 12:21:42 obelix-3 kernel: ************ acx100_initmac_1 ************ Nov 10 12:21:42 obelix-3 kernel: Allocated 964 bytes for firmware module loading. Nov 10 12:21:42 obelix-3 kernel: WriteACXImage (radio): 1, ValidateACXImage: 1 Nov 10 12:21:42 obelix-3 kernel: writing WEP options. Nov 10 12:21:42 obelix-3 kernel: get_mask 0x00002004, set_mask 0x00000000 Nov 10 12:21:42 obelix-3 kernel: Got antenna value 0x8f. Nov 10 12:21:42 obelix-3 kernel: get_mask 0x00000000, set_mask 0x00000000 - after update Nov 10 12:21:42 obelix-3 kernel: Regulatory domain ID as read from EEPROM: 0x30 Nov 10 12:21:42 obelix-3 kernel: SSID = STA095353, len = 9 Nov 10 12:21:42 obelix-3 kernel: SSID = STA095353, len = 9 Nov 10 12:21:42 obelix-3 kernel: hw_unavailable-- Nov 10 12:21:42 obelix-3 kernel: acx100: form factor 0x00 (standard?), radio type 0x11 (RFMD), EEPROM version 0x0004. Uploaded firmware 'Rev 1.9.8.b' (0x01020505). Nov 10 12:21:42 obelix-3 kernel: firmware version >= 1.9.3.e --> using software timer Nov 10 12:21:42 obelix-3 kernel: acx100_set_status: Setting iStatus = 0 (STARTED) Nov 10 12:21:42 obelix-3 kernel: initial settings update on iface activation. Nov 10 12:21:42 obelix-3 kernel: get_mask 0x00000000, set_mask 0x0000dfff Nov 10 12:21:42 obelix-3 kernel: acx100_set_status: Setting iStatus = 0 (STARTED) Nov 10 12:21:42 obelix-3 kernel: Updating WEP key settings Nov 10 12:21:42 obelix-3 kernel: Updating transmit power: 20 dBm Nov 10 12:21:42 obelix-3 kernel: changing radio power level to 20 dBm (0x3f) Nov 10 12:21:42 obelix-3 kernel: Updating antenna value: 0x8F Nov 10 12:21:42 obelix-3 kernel: Updating energy detect threshold: 112 Nov 10 12:21:42 obelix-3 kernel: Updating Channel Clear Assessment value: 0x0D Nov 10 12:21:42 obelix-3 kernel: Updating: enable Tx Nov 10 12:21:42 obelix-3 kernel: Updating: enable Rx Nov 10 12:21:42 obelix-3 kernel: Updating short retry limit: 5, long retry limit: 3 Nov 10 12:21:42 obelix-3 kernel: Updating xmt MSDU lifetime: 2048 Nov 10 12:21:42 obelix-3 kernel: Updating regulatory domain: 0x30 Nov 10 12:21:42 obelix-3 kernel: Updating channel: 1 Nov 10 12:21:42 obelix-3 kernel: acx100_set_status: Setting iStatus = 1 (SCANNING) Nov 10 12:21:42 obelix-3 kernel: get_mask 0x00000000, set_mask 0x00000000 - after update Nov 10 12:21:42 obelix-3 kernel: ProcessProbeResponse: found and registered station 0: ESSID "" on channel 1, BSSID 00 40 05 52 D7 63 (Access Point, 36Mbps), SIR 141, SNR 0. Nov 10 12:37:44 obelix-3 kernel: Sending authentication1 request, awaiting response! Nov 10 12:37:44 obelix-3 kernel: process_authen: UNVERIFIED. Nov 10 12:37:44 obelix-3 kernel: 00.80.C8.09.53.53<4>00.80.C8.09.53.53<4>00.40.05.52.D7.63<4>00.40.05.52.D7.63<4>00.40.05.52.D7.63<4>Algorithm is ok Nov 10 12:37:44 obelix-3 kernel: Got current client for sta hash tab Nov 10 12:37:44 obelix-3 kernel: Found acceptable client Nov 10 12:37:44 obelix-3 kernel: process_authen auth seq step 2. Nov 10 12:37:44 obelix-3 kernel: acx100_set_status: Setting iStatus = 3 (AUTHENTICATED) Nov 10 12:37:44 obelix-3 kernel: Sending association request, awaiting response! NOT ASSOCIATED YET. Nov 10 12:37:44 obelix-3 kernel: association: requesting capabilities 0x0021 Nov 10 12:37:44 obelix-3 kernel: Association FAILED: response status code 18: "Association denied due to requesting station not supporting all of the data rates in the BSSBasicRateSet parameter"! ======================= Nov 10 13:57:32 obelix-3 kernel: Association FAILED: response status code 18: "Association denied due to requesting station not supporting all of the data rates in the BSSBasicRateSet parameter"! Nov 10 13:57:33 obelix-3 kernel: <acx_timer> iStatus = 3 Nov 10 13:57:33 obelix-3 kernel: resend association request (attempt 11). Nov 10 13:57:33 obelix-3 kernel: Sending association request, awaiting response! NOT ASSOCIATED YET. Nov 10 13:57:33 obelix-3 kernel: association: requesting capabilities 0x0021 Nov 10 13:57:33 obelix-3 kernel: Association FAILED: response status code 18: "Association denied due to requesting station not supporting all of the data rates in the BSSBasicRateSet parameter"! Nov 10 13:57:34 obelix-3 kernel: <acx_timer> iStatus = 3 Nov 10 13:57:34 obelix-3 kernel: association request reply timeout, giving up. Nov 10 13:57:34 obelix-3 kernel: acx100_set_status: Setting iStatus = 1 (SCANNING) Nov 10 13:57:35 obelix-3 kernel: <acx_timer> iStatus = 1 Nov 10 13:57:33 obelix-3 kernel: <acx_timer> iStatus = 3 Nov 10 13:57:33 obelix-3 kernel: resend association request (attempt 11). Nov 10 13:57:33 obelix-3 kernel: Sending association request, awaiting response! NOT ASSOCIATED YET. Nov 10 13:57:33 obelix-3 kernel: association: requesting capabilities 0x0021 Nov 10 13:57:33 obelix-3 kernel: Association FAILED: response status code 18: "Association denied due to requesting station not supporting all of the data rates in the BSSBasicRateSet parameter"! Nov 10 13:57:34 obelix-3 kernel: <acx_timer> iStatus = 3 ---------------------------------------------------------------------- >Comment By: Andreas Mohr (andim2) Date: 2004-01-29 19:57 Message: Logged In: YES user_id=132674 No report whatsoever any more about incompatible rates, and I suspect that this was caused by the 802.11g mis-handling overflows, and it's an anon report, so closing. ---------------------------------------------------------------------- Comment By: Andreas Mohr (andim2) Date: 2003-12-02 12:41 Message: Logged In: YES user_id=132674 PLEASE try the pre6_plus_fixes_6 tar, this should hopefully fix this problem (the driver was copying the maximum number of supported rates instead of the actually announced number of rates, thus bumping into the next data structure. doh!). ---------------------------------------------------------------------- Comment By: Andreas Mohr (andim2) Date: 2003-11-10 20:33 Message: Logged In: YES user_id=132674 One question (only ONE!): Is this kind of hassle new with pre5, or did it also occur with pre3 and pre4 (NOTE: pre4 may lock up your box, so try pre3 or even older versions first!). Thanks! ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=543745&aid=839170&group_id=75380 |