[Acx100-devel] [ acx100-Bugs-824861 ] TX error Pre3

[SourceForge.net <no...@so...>]

Bugs item #824861, was opened at 2003-10-16 07:33
Message generated for change (Comment added) made by nobody
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=543745&aid=824861&group_id=75380

Category: None
Group: None
Status: Open
Resolution: None
Priority: 5
Submitted By: Nobody/Anonymous (nobody)
Assigned to: Nobody/Anonymous (nobody)
Summary: TX error Pre3

Initial Comment:
I am having issues with with 0.2.0-pre3 where the card
will stay up for quite a while and then drop off of
service with "TX Error the Distance may be to far."  I
have installed on redhat 9 kernel 2.4.20.  The machine
is currently located right next to my WAP so I know
that the distance isn't to far.  The only way to clear
issue is to stop_net and start_net.  iwconfig wlan0
shows that the signal strength is 64/100 and SNR =
0/100 and SIR = 100/100.  I have used most of the
default settings other than IP address changed.

----------------------------------------------------------------------

Comment By: Nobody/Anonymous (nobody)
Date: 2004-01-11 14:11

Message:
Logged In: NO 

I have got the same problem with 0.2.0pre6-1 (DWL-520+)

----------------------------------------------------------------------

Comment By: Nick Taptiklis (taptiklis)
Date: 2003-12-18 13:01

Message:
Logged In: YES 
user_id=832108

I'm getting this same problem with RH9 and 0.2.0-pre6 (dwl-
650+)



----------------------------------------------------------------------

Comment By: Andreas Mohr (andim2)
Date: 2003-12-02 03:51

Message:
Logged In: YES 
user_id=132674

Hmm, I have a similar recent report which might indicate
that there indeed is a real problem here.
Please retry with a recent version (e.g. the
pre6_plus_fixes_6 tar)
and post some logs.
Thanks!

----------------------------------------------------------------------

Comment By: Andreas Mohr (andim2)
Date: 2003-11-10 09:53

Message:
Logged In: YES 
user_id=132674

The reporter could try out 0.2.0pre5 now to check whether it
works now ;-)
(or just wait some more)

pre5 is MUCH more solid than pre4 (although there's still at
least one remaining corner case where it locks up the box)

----------------------------------------------------------------------

Comment By: Nobody/Anonymous (nobody)
Date: 2003-10-18 10:56

Message:
Logged In: NO 

0.2.0pre4 locked up the box.  

----------------------------------------------------------------------

Comment By: Nobody/Anonymous (nobody)
Date: 2003-10-18 07:57

Message:
Logged In: NO 

0.2.0pre4 locked up the box.  

----------------------------------------------------------------------

Comment By: Andreas Mohr (andim2)
Date: 2003-10-16 10:38

Message:
Logged In: YES 
user_id=132674

Did 0.2.0pre4 work? (or does it lock up the box?)
It has quite some changes which might fix that.
Else just wait for the next version...

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=543745&aid=824861&group_id=75380