Re: [ACPI] ACPI 20020214 and Gericom Laptop

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

hi!

> Could you send me the output when using 20011218 with Kai's patch?  I'm
> seeing a similar issue on an SMP system, but can't pinpoint the root cause.

here it is:

dmesg:

Linux version 2.4.17-acpi218 (root@synapscape) (gcc version 2.96 20000731 
(Red Hat Linux 7.1 2.96-98)) #13 Fri Feb 1 10:50:10 CET 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000eb400 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
 BIOS-e820: 000000000eff0000 - 000000000efffc00 (ACPI data)
 BIOS-e820: 000000000efffc00 - 000000000f000000 (ACPI NVS)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 61424
zone(0): 4096 pages.
zone(1): 57328 pages.
zone(2): 0 pages.
ACPI: Boot-time table processing enabled
ACPI: RSD PTR  (v0 PTLTD ) @ 0x000f7110
ACPI: RSDT (v1 PTLTD    RSDT   1540.0) @ 0x0effc0b7
ACPI: FADT (v1 VT8603 TWISTER  1540.0) @ 0x0efffb64
ACPI: BOOT (v1 PTLTD  $SBFTBL$ 1540.0) @ 0x0efffbd8
Kernel command line: ro root=/dev/hda4 vga=791 acpi_boot=on pci=acpiirq
Initializing CPU#0
Detected 999.369 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1992.29 BogoMIPS
Memory: 239232k/245696k available (1352k kernel code, 6076k reserved, 408k 
data, 212k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0387f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0387f9ff 00000000 00000000 00000000
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rg...@at...)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd81e, last bus=1
PCI: Using configuration type 1
 tbxface-0099 [01] Acpi_load_tables      : ACPI Tables successfully loaded
Parsing 
Methods:..........................................................................................................
106 Control Methods found and parsed (377 nodes total)
ACPI Namespace successfully loaded at root c0302bec
ACPI: Core Subsystem version [20011218]
evxfevnt-0081 [02] Acpi_enable           : Transition to ACPI mode successful
Executing device _INI methods:......................................
38 Devices found: 38 _STA, 2 _INI
Completing Region and Field initialization:...................
8/14 Regions, 11/11 Fields initialized (377 nodes total)
ACPI: Subsystem enabled
ACPI: Power Resource found
ACPI: System firmware supports S1 S4 S5
ACPI: PCI Root Bridge (bus 00)
PCI: Probing PCI hardware (bus 00)
Unknown bridge resource 0: assuming transparent
ACPI: PCI Routing Table (bus 00)
  device=01 pin=00 source=\_SB_.PCI0.PIB_.LNKC source_index=0
  device=07 pin=00 source=\_SB_.PCI0.PIB_.LNKA source_index=0
  device=07 pin=01 source=\_SB_.PCI0.PIB_.LNKB source_index=0
  device=07 pin=02 source=\_SB_.PCI0.PIB_.LNKC source_index=0
  device=07 pin=03 source=\_SB_.PCI0.PIB_.LNKD source_index=0
  device=05 pin=00 source=\_SB_.PCI0.PIB_.LNKA source_index=0
  device=06 pin=00 source=\_SB_.PCI0.PIB_.LNKA source_index=0
  device=0c pin=00 source=\_SB_.PCI0.PIB_.LNKA source_index=0
  device=0c pin=01 source=\_SB_.PCI0.PIB_.LNKB source_index=0
  device=0d pin=00 source=\_SB_.PCI0.PIB_.LNKA source_index=0
ACPI: PCI Routing Table (bus 01)
  device=00 pin=00 source=\_SB_.PCI0.PIB_.LNKA source_index=0
  device=00 pin=01 source=\_SB_.PCI0.PIB_.LNKB source_index=0
  device=00 pin=02 source=\_SB_.PCI0.PIB_.LNKC source_index=0
  device=00 pin=03 source=\_SB_.PCI0.PIB_.LNKD source_index=0
PCI: Found IRQ 10 for device 00:05.0
PCI: Found IRQ 10 for device 00:06.0
PCI: Found IRQ 10 for device 00:0d.0
PCI: Via IRQ fixup for 00:07.5, from 255 to 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.15)
apm: overridden by ACPI.
Starting kswapd
Journalled Block Device driver loaded
ACPI: Processor[0]: C0 C1 C2, 8 throttling states
[ACPI Debug] String: __________________________________
[ACPI Debug] String: 
[ACPI Debug] String: BAT0_BIF_RETURN:
[ACPI Debug] String: __________________________________
[ACPI Debug] String: __________________________________
[ACPI Debug] String: 
[ACPI Debug] Package: Elements Ptr - cef3f788
[ACPI Debug] String: __________________________________
[ACPI Debug] String: __________________________________
[ACPI Debug] String: 
[ACPI Debug] String: BAT0_BIF_RETURN:
[ACPI Debug] String: __________________________________
[ACPI Debug] String: __________________________________
[ACPI Debug] String: 
[ACPI Debug] Package: Elements Ptr - cef3f788
[ACPI Debug] String: __________________________________
ACPI: Battery socket found, battery present
ACPI: AC Adapter found
ACPI: Power Button (FF) found
ACPI: Multiple power buttons detected, ignoring fixed-feature
ACPI: Lid Switch (CM) found

lspci -v:

00:00.0 Host bridge: VIA Technologies, Inc. VT8605 [ProSavage PM133]
	Flags: bus master, medium devsel, latency 0
	Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Capabilities: [a0] AGP version 2.0
	Capabilities: [c0] Power Management version 2

00:01.0 PCI bridge: VIA Technologies, Inc. VT8605 [PM133 AGP] (prog-if 00 
[Normal decode])
	Flags: bus master, 66Mhz, medium devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: e0100000-e01fffff
	Prefetchable memory behind bridge: f0000000-f7ffffff
	Capabilities: [80] Power Management version 2

00:05.0 Ethernet controller: Accton Technology Corporation: Unknown device 
1216 (rev 11)
	Subsystem: Accton Technology Corporation: Unknown device 2242
	Flags: bus master, medium devsel, latency 64, IRQ 10
	I/O ports at 1c00 [size=256]
	Memory at 10000000 (32-bit, non-prefetchable) [size=1K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [c0] Power Management version 2

00:06.0 Communication controller: Lucent Microelectronics LT WinModem
	Subsystem: Askey Computer Corp.: Unknown device 4005
	Flags: medium devsel, IRQ 10
	Memory at e0000000 (32-bit, non-prefetchable) [disabled] [size=256]
	I/O ports at 1030 [disabled] [size=8]
	I/O ports at 1400 [disabled] [size=256]
	Capabilities: [f8] Power Management version 2

00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 
40)
	Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
	Flags: bus master, stepping, medium devsel, latency 0
	Capabilities: [c0] Power Management version 2

00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) 
(prog-if 8a [Master SecP PriP])
	Flags: bus master, medium devsel, latency 64
	I/O ports at 1020 [size=16]
	Capabilities: [c0] Power Management version 2

00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1a) (prog-if 00 
[UHCI])
	Subsystem: Unknown device 0925:1234
	Flags: medium devsel, IRQ 5
	I/O ports at 1000 [size=32]
	Capabilities: [80] Power Management version 2

00:07.4 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 
40)
	Flags: medium devsel, IRQ 9
	Capabilities: [68] Power Management version 2

00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio 
Controller (rev 50)
	Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1840
	Flags: medium devsel
	I/O ports at 1800 [disabled] [size=256]
	I/O ports at 103c [disabled] [size=4]
	I/O ports at 1038 [disabled] [size=4]
	Capabilities: [c0] Power Management version 2

00:0c.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)
	Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1860
	Flags: bus master, slow devsel, latency 0, IRQ 10
	Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
	I/O window 0: 00000000-00000003
	I/O window 1: 00000000-00000003
	16-bit legacy interface ports at 0001

00:0c.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)
	Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1860
	Flags: bus master, slow devsel, latency 0, IRQ 10
	Memory at 10002000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=06, subordinate=09, sec-latency=0
	I/O window 0: 00000000-00000003
	I/O window 1: 00000000-00000003
	16-bit legacy interface ports at 0001

00:0d.0 FireWire (IEEE 1394): Lucent Microelectronics: Unknown device 5811 
(rev 04) (prog-if 10 [OHCI])
	Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1881
	Flags: medium devsel, IRQ 10
	Memory at e0001000 (32-bit, non-prefetchable) [disabled] [size=4K]
	Capabilities: [44] Power Management version 2

01:00.0 VGA compatible controller: S3 Inc.: Unknown device 8d01 (rev 02) 
(prog-if 00 [VGA])
	Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1830
	Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 5
	Memory at e0100000 (32-bit, non-prefetchable) [size=512K]
	Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [dc] Power Management version 2
	Capabilities: [80] AGP version 2.0