From: Herman S. <ml...@sw...> - 2004-06-20 22:20:19
|
Hi All, I have an Asus M6N and the Bios DSDT provides a PBLK length of 7 which causes ACPI to always use the C1 processor state. This laptop definitely supports C2 and most people have just used custom DSDT's and changed the value to 6. I don't like using a custom DSDT so I made a quick kernel patch (attached) to accept 7 as a good value. I've searched the archives and found that other people have had issues with PBLK being set to something other than 0 or 6 and at one point the ACPI code was relaxed to allow for other values but then changed back to the original strict mode due to issues with C2 being used when it shouldn't be. There was also talk of making the relaxed code optional but it seems that never got off the ground. My question is, if I make a nicer patch that allows for either strict interpretation versus a relaxed one, is there a chance that it will get included? It seems there is enough interest out there to make it worth the effort. Thanks, -Herman |