From: Bryan K. W. <br...@ay...> - 2004-03-04 14:44:49
|
Hi again, Thanks to S=E9rgio Monteiro Basto for the suggestion about upgrading to a slightly later kernel. This seems to help, but there's still a = problem. I'm now using 2.4.25. The overheating problem is less, but the temperature still rises by about 10 degrees whenever I plug in a high-speed USB device, and stays there until I rmmod the ehci-hcd module. After removing the module, the temperature drops (within a few seconds) back to a normal value. Bryan ser...@ne... said: > On Mon, 2004-03-01 at 17:08, Bryan K. Wright wrote: > Here are the configuration details: > Kernel 2.4.21 (vanilla) with the acpi-20030619-2.4.21.diff patch. > Sharp PC-AV18 laptop (KN266, Athlon XP-M 1800+) > Tested with two different models of Epson scanner, and with two > different > brands of external USB disks. > = > Has anybody else seen similar symptoms? > yes we had this symptoms when we work with that kernel(2.4.21) after 4 > release 2.4.25 I don't remember any complain. Please upgrade you > kernel to last one, and test it again . = -- = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D Bryan Wright |"If you take cranberries and stew them like = Physics Department | applesauce, they taste much more like prune= s = University of Virginia | than rhubarb does." -- Groucho = Charlottesville, VA 22901 | = (434) 924-7218 | br...@vi... =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D |