Open Source C Hardware Platforms for Linux - Page 2

Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits unexpected behaviour for your device and configuration, you should upgrade to the latest development version instead to see if your problem is resolved as some bugs in previous releases or development builds may already have been resolved. Single binary firmware. Support for TuyaMCU. Increase PWM channels to 16. Initial support for ESP32S3 with support for 38 configurable GPIOs.

CUPS back-end for the canon printers using the proprietary USB over IP BJNP protocol. This back-end allows Cups to print over the network to a Canon printer. The design is based on reverse engineering of the protocol. Version 2.0 adds ink-level reporting and improved out-of-paper detection. Version 2.0.1 is now released under GPLv2 or later to be compatible with the changed cups license. No other changes. Version 2.0.2 fixes a compile error with GCC9 Version 2.0.3 Fix GCC10 compile errors. increase status buffer size for newer printers that send larger status messages

dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB.

Firmware loaders for M-Audio/Midiman USB MIDI and Audio devices

In-circuit programming (ISP) tool for the NXP (Philips) LPC800/LPC1100/LPC1200/LPC1300/LPC1700/LPC1800/LPC2000/LPC4300 series ARM7/Cortex-M0/Cortex-M0+/Cortex-M3/Cortex-M4 microcontrollers

UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.

This project will provide information and software to get hardware from the manufacturer Roccat to work under linux.

System Stability Tester is a multi platform open source clone of SuperPI and comes with a GUI and a CLI. It can be used for CPU and RAM burning, stressing and benchmarking.

The Open IPMI project aims to develop an open code base to allow access to platform information using Intelligent Platform Management Interface (IPMI).

Tool for controlling the special features of a "U3 smart drive" USB Flash disk.

ESP8266 firmware for performing deauthentication attacks, with ease. Wi-PWN is a firmware that performs death attacks on cheap Arduino boards. The ESP8266 is a cheap microcontroller with built-in Wi-Fi. It contains a powerful 160 MHz processor and it can be programmed using Arduino. A deauthentication attack is often confused with Wi-Fi jamming, as they both block users from accessing Wi-Fi networks. The 802.11 Wi-Fi protocol contains a so-called deauthentication frame. It is used to disconnect clients safely from a wireless network. Because these management packets are unencrypted, you just need the MAC to address of the Wi-Fi router and of the client device which you want to disconnect from the network. You don’t need to be in the network or know the password, it’s enough to be in its range. With the 802.11w-2009 updated standards, management frames are encrypted by default.

A port of the Linux operating system kernel and assorted GNU userspace to the GameCube and Wii gaming consoles from Nintendo. Please, see http://www.gc-linux.org for additional information.

The GlobalPlatform card specification is a standard for the management of the contents on a smart card. Mainly this comprises the installation and the removal of applications. This project offers a C library and a command line shell. Find more information on https://kaoh.github.io/globalplatform/

The Linux GPIB Package is a support package for GPIB (IEEE 488.2) hardware. The package contains a development environment consisting of a GPIB library written in C, kernel driver modules, and bindings for several other languages.

This linux/unix utility can be used to remove or set the infamous idle3 timer found on recent Western Digital Hard Disk Drives.

usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.

libusbx is OBSOLETE and has been superseded by http://libusb.info

A simple fan control program. Read temperatures, check them against configured limits and switch to appropriate (also pre-configured) fan level. Requires a working thinkpad_acpi or any other hwmon driver that enables temperature reading and fan control from userspace.

Win NT/2K/XP, and Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4li

mochad is a Linux TCP gateway daemon for the X10 CM15A RF (radio frequency) and PL (power line) controller and the CM19A RF controller.

Serial line sniffer (slsnif). slsnif is a serial port logging utility. It listens to the specified serial port and logs all data going through this port in both directions.

Please find the linuxwacom project's new home on Github: https://linuxwacom.github.io/ Previous Description: This project manages the libraries, configuration, and diagnostic tools for Wacom tablets running under Linux. It also maintains updated Linux kernel drivers and Xorg/XFree86 XInput drivers.

acsccid is a PC/SC driver for Linux/Mac OS X and it supports ACS CCID smart card readers. This library provides a PC/SC IFD handler implementation and communicates with the readers through the PC/SC Lite resource manager (pcscd).

serialconsole (sc) is a minimal terminal program allowing to use one machine to access the serial console of another machine.

This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information about "Boards Managers" is available on Arduino.cc official website.