Activity for denyo
-
denyo posted a comment on ticket #1976
I did not set anything on my end to set the dark theme up. I assumed Vice had a support with dark theme. I will take a look at GTK side then.
-
I use Windows 11 x64 with dark system theme. Vice 3.8 GTK
-
The window dialog texts are very hard to read on dark theme on Windowns
-
Ok after some digging based on compyx' comment I did digging. I had controlmyjoystick installed on the system which creates an emulated joytick. Removing it solved it , but I still think that Viice should be nicer about it.
-
There is no vice.ini there, but I have autostart-C64SC.d64 and sdl-vice.ini It does not look like it is related to existing ini file.
-
Hi I would not know how you can produce this. I have GTK Vice 3.6 on the same system and it works fine, but GTK 3.8 one is misbehaving as in the video. Basically I can't pass the setting screen that loads. I do not have joystick attached to the PC. Is there a way to reset some settings or delete some stale stuff so I can strt it fresh?
-
The mouse pointer looks in the wrong place, it is my screen recording program.
-
Initial settings window does not go away.
-
Thanks, this new release does not crash.
-
I have 6.0.5 and it crashes like the OP on Windowx 10 x64 6.0.4 was not crashes on startup but it was crashing during close.
-
, butcrashingI have 6.0.5 and it crashes like the OP on Windowx 10 x64 6.0.4 was not crashes on startup but it was crahing during close.
-
I have 6.0.5 and it crashes like the OP on Windowx 10 x64
-
Make sure you are using scrubbing tool Ctrl-Shift-S (when the tool becomes area due to toggling) Save your movie Back to the area , the tool is not scrubbing I am sure most people will trigger shift before ctrl in the ctrl-shift-s sequence since it is easier to go with that than ctrl-shift-s (ctrl first) This is a minor issue but it would be nice if movie saving does not distinguish between ctrl-shift-s and shift-ctrl-s combo. thanks
-
Ok that makes sense. I am using Blender for EXR output. I will see if it can do multipart.
-
Hi mrViewers caching speed is quite horrible when multilayer EXRs are loaded. I am wondering if mrViewer is actualy loading and caching all the layers. If so would not it be better if it caches the default one and recaches if the user changes to another layer in the sequence. Thanks
-
Have you tried letting it open more than 24 hours?
-
That is really weird. I can repeat this issue with any kind of file sequence that has multiple periods in them. I tried with drag and drop or loading from the cli etc, all the same. I will see if I can give you a repeatable file sequence.
-
I can totally repeat it. Just make sure you have multiple periods in the file name, something like like filename.some-more.abitmore.period_05.%d.jpg This kind of pattern only loads a single file in mrViewer at least on Windows 10
-
I can totally repeat it. Just make sure you have multiple periods in the file name, something like like filename.some-more.abitmore.period_05.%d.jpg
-
I see, it makes sense I guess.
-
Hi Here is a screenshot from a 3 sec movie at 30 fps. You can clearly see that it is set to 30fps and the frame is at the end. It shows 3 secs at the bottom but 2:29 at the top. Bug or?
-
Thanks, for the info. This is perfect.
-
Hi I have gone through the shortcut list but I cant find a shortcut for resetting the zoom to the actual 1:1 image size. Is there a way to do it? I can zoom in and out with "," and "."
-
Sorry for the confusing statement. What I mean was that it is using about %.2.5 of the 12 threads not %2.5 of a single thread.
-
I actually had multiple occasions of zombie processes. I will keep an eye on it, I realize it is not an easy case. Is it possible to lower the idle cpu given that number is proportion of the 12 thread, so it is not a small percent of a single cpu.
-
Hi It seems like if you leave mrViewer long enough in the background (all day maybe?), it starts using high CPU while being in the background. Here I have only one mrV open but there are 2 processes. Both are using cpu for doing nothing. One is clearly it is a zombie process given I only have one instance open and that is the one using %8.30 of cpu. I regularly open and close mrV all day so maybe the zombie processes happen because in some cases it does not close properly. I have these here and there....
-
Hi It seems like if you leave mrViewer long enough in the background (all day maybe?), it starts using high cpu while being in the background. Here I have only one mrV open but there are 2 processes. Both are using cpu for doing nothing. One is clealy it is a zombie process given I only have one instance open and that is the one using %8.30 of cpu. I regularly open and close mrV all day so maybe the zombie processes happen because in some cases it does not close properly. I have these here and there....
-
Hi It seems like if you leave mrViewer long enough in the background (all day maybe?), it starts using high cpu while being in the background. Here I have only one mrV open but there are 2 processes. Both are using cpu for doing nothing. One is clealy it is a zombie process given I only have one instance open and that is the one using %8.30 of cpu. The other process is open but no playback is happening (and it is in the bg, no interaction) but it still uses some cpu. I am on Windows 10 x64 thank...
-
Hi It seems like if you leave mrViewer long enough in the background, it starts using high cpu while being in the background. Here I have only one mrV open but there are 2 processes. Both are using cpu for doing nothing. One is clealy it is a zombie process given I only have one instance open and that is the one using %8.30 of cpu. The other process is open but no playback is happening (and it is in the bg, no interaction) but it still uses some cpu. I am on Windows 10 x64 thanks
-
Hi It seems like if you leave mrViewer long enough in the background, it starts using high cpu while being in the background. Here I have only one mrV open but there are 2 processes. Both are using cpu for doing nothing. One is clealy it is a zombie process given I only have one instance open and that is the one using %8.30 of cpu. The other process is open but no playback is happening (and it is in the bg, no interaction) but it still uses some cpu. I am on Windows 10 x64
-
clearlyHi It seems like if you leave mrViewer long enough in the bnackground, it starts using high cpu while being in the background. Here I have only one mrV open but there are 2 processes. Both are using cpu for doing nothing. One is clearlt a zombie process given I only have one instance open and that is the one using %8.30 of cpu. The other process is open but no playback is happening (and it is in the bg, no interaction) but it still uses some cpu. I am on Windows 10 x64
-
can't, but, butplaybackHi I have a 350 frames exr sequence. I load it in mrV , it caches for a while but it does not cache the whole thing properly and eventually the playback catches up with the end of cashing whic results in choppy playback after a while. At the time of that playback the system had 18gb of free memory so it cant be the memory limitation. I am on Windows 10 x64 Here is a video showing the issue. I struggled to start the plaback while recording the first couple seconds but the issue...
-
can't, but, butplaybackHi I have a 350 frames exr sequence. I load it in mrV , it caches for a while but it does not cache the whole thing properly, and the playback becomes choppy after a while. At the time of that playback the system had 18gb of free memory so it cant be the memory limitation. I am on Windows 10 x64 Here is a video showing the issue. I struggled to start the plaback while recording the first couple seconds but the issue is quite visible afterwards.
-
Hi it loks like mrV gets confused if the file name is like sequence_test_12.3_###.jpg where "###" is he actual integer numbers. thanks
-
Hi It will be very helpful if the save sequence or related save dialog windows opens in the current file/sequences folder. Maybe it can be an optional preferences thing. There are couple options in the saving section of the preferences, but those do not do what I am asking here. thanks
-
-
Thanks for the fix for the sequence export, h264 seems to work so far, based on my initial testing.
-
Thanks I will. 5.8.7 has issue with saving a working movie from the active sequence on Windows. Are you experiencing that issue? H264 (.mp4) does not work for me, only the mpeg4
-
Thanks I will. 5.8.7 has issue with saving a working movie from the active sequence on Windows. Are you experiencing that issue?
-
Hi I was using 5.8.7 on Windows 10 x64 When I tried to save the current playback as a video most of the video output options creates unplayable video files. I think only the mpeg4 was working. I tested them with Vlc and none of the h264 etc videos played. With 5.8.8 I can't even save, it says "Could not save sequence or movie, only single frame specified use %d" The sequence is alright, mrViewer plays them fine so no idea what the issue is. I am just using "file- save -sequence/movie"
-
Thanks for the reply. That will be very useful indeed.
-
Hi I am trying to put together a basic script. It loads a given image and displays it. That part works but the problem is that mrViewer also starts playing the actual sequence even though I am not passing the "P" flag, I even disabled the autoplayback in the UI, still without any luck. I think this is just a bug. Basically I am passing a frame from a sequence but I want mrViewer to show just that frame and not play any of the rest of the sequence. The command is like this mrviewer.exe image002.png...
-
Hi I am trying to put together a basic script. It loads a given image and displays it. That part works but the problem is that mrViewer also starts playing the actual sequence even though I am not passing the "P" flag, I even disabled the autoplayback in the UI, still without any luck. I think this is just a bug. Basically I am passing a frame from a sequence but I want mrViewer to show just that frame and not play any of the rest of the sequence. The command is like this mrviewer.exe image002.p...
-
Hi I tried it and it seems to work so far, now it feels much more solid. Thanks for taking time to address these issues.
-
Thanks for the follow up, I figured it must have been about a recent change.
-
Hi I use left and right for bac and forward 1 frame and up and down for forward and backward playback. Once the video is playing and stopped, it seems like these shortcuts do not work. To me it seems like the value fields steal the focus so these shortcuts are not available at all. And it is notpossible to exist value editing or button focus (button is highlighted) I am using Windows X64 5.4.8 Thanks
-
Thanks for the help and the fix.
-
Hi That works! Thanks for the fix. What was the issue? Btw one minor issue, is it possible to make MrV to remember the last window position and the size? It always starts at tir left top with fixed size, relatively small to the size of the screen.
-
It looks like it is the ui since the app is not even aware of any window activity it seems. Btw MrViewer used to work well on my system very well couple years ago but I am sorry that I cant pinpoint the right versions. I am guessing they were early version 4 and 3 releases.
-
It looks like it is the ui since the app is not even aware of any window activity it seems.
-
Thanks for the update, the same issues persists including the debug window showing nothing.
-
I guess it is a bug. Thanks for looking into it.
-
Hi I did that, and no activity is show when I drop and drop. I only have these ones when opening [ocio] Setting OCIO environment variable to nuke-default. [ocio] Setting OCIO environment variable to: [ocio] D:/mrViewer/ocio/nuke-default/config.ocio [prefs] mrv::Preferences::run(1716) use_OCIO
-
Hi mrViewer 64 bits - v5.4.7 - Built May 22 2020 00:03:22 With msvc 1,900 (C) 2007-2019 Film Aura, LLC. The auto load was not enabled. I enabled it and restarted MrViewer without any luck. I even deleted the preferences with no luck. I am using the zip version. Btw I can open movies if I do it manually.
-
Hi mrViewer 64 bits - v5.4.7 - Built May 22 2020 00:03:22 With msvc 1,900 (C) 2007-2019 Film Aura, LLC. The auto load was not enabled. I enabled it and restarted MrViewer without any luck. I even deleted the preferences with no luck. I am using the zip version.
-
I tried it with windows explorer and double commander. I do not have any issues with drag and drop in any program, so this is definetely not a mouse or system issue. I an infact drag and drop the same movies/files into Djv and it works with it. In MrViewer it looks like nothing is happening.
-
Hi It would be very nice if one could drag and drop movies and images to the main window. Not sure if this is an existing feature if so it does not work. I am on Windows 10 x64
-
Sorry I was busy, it did not help :( I so do not want to waste more of your time on this. I am surprised that noone else has this issue.
-
[opengl] Selecting shader type automatically: NVidia NV30 [opengl] Using hardware shader profile: NVidia NV30 [opengl] mrViewer supports YUV images through shaders. [ocio] Setting OCIO environment variable to nuke-default. [ocio] Setting OCIO environment variable to: [ocio] XXXXXXX/mrViewer-v4.2.9-Windows-64/ocio/nuke-default/config.ocio [prefs] mrv::Preferences::run(1264) numDisplays 1 [prefs] mrv::Preferences::run(1273) numViews 3 for default [prefs] mrv::Preferences::run(1291) uiGamma 1.000000...
-
I am sorry you were right about the color issue, the new ffmpeg does not have the color issue it seems.
-
The new build did not help with ffmpeg ;( The funny thing is that the ffplay.exe shows the images properly : ( I am speechless. This must be about some ui thing messing up the display rather than the actual engines are misinterpreting. Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (Family: 6, Model: 158, Stepping: 10) MMX MMX2 SSE SSE2 See yourself here side by side (Mrviewer vs Xnview). Random pic from the internet, attached here also.
-
The new build did not help with ffmpeg ;( The funny thing is that the ffplay.exe shows the images properly : ( I am speechless. This must be about some ui thing messing up the display rather than the actual engines are misinterpreting. Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (Family: 6, Model: 158, Stepping: 10) MMX MMX2 SSE SSE2 See yourself here side by side. Random pic from the internet, attached here also.
-
The new build did not help with ffmpeg ;( The funny thing is that the ffplay.exe shows the images properly : ( I am speechless. This must be about some ui thing messing up the display rather than the actual engines are misinterpreting. Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (Family: 6, Model: 158, Stepping: 10) MMX MMX2 SSE SSE2 See yourself here
-
The new build did not help with ffmpeg ;( The funny thing is that the ffplay.exe shows the images properly : ( I am speechless. This must be about some ui thing messing up the display rather than the actual engines are misinterpreting. Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (Family: 6, Model: 158, Stepping: 10) MMX MMX2 SSE SSE2
-
Loading lib is Ffmpeg, which suffers from the color and the gamma issue. I change it to oiio or imagemagick, then I get only the gamma issue (nees to be set to 0.55 for correct gamma for me) Disabling LUT has no affect. Unfortunately I do not remember the latest version that worked, because I deleted them before upgrading :( I am using the default settings, even after wiping the default settings file. As far as I can tell .exr does not suffer from it. It seems to be a 8bit jpg and png issue.
-
Loading lib is Ffmpeg, which suffers from the color and the gamma issue. I change it to oiio or imagemagick, then I get only the gamma issue (nees to be set to 0.55 for correct gamma for me) Disabling LUT has no affect. Unfortunately I do not remember the latest version that worked, because I deleted them before upgrading :( I am using the default settings, even after wiping the default settings file.
-
4.1.7 - > Color space is correct, gamma is wrong. I need to set Gamma to 0.55 to pull the image to the real range. So the latest versions seems to have issues with the color space(like a profile with extreme contrasts) and wrong gamma.
-
4.1.7 - > Color space is correct, gamma is wrong. I need to set Gamma to 0.55 to pull the image to the real range.
-
4.1.7 - > Color space isn correct, gamma is wrong. I need to set Gamma to 0.55 to pull the image to the real range.
-
Hi The uploaded version has the same issue. I also used the IMdisplay(with both versions) to check the images, and IMDisplay shows the images properly. I am going to download older versions to see where and when Mrviewer can show images properly. I also deleted config files (filmaura) without much luck.
-
Well, Djv_view and Photoshop shows the files perfectly, along with Blender's internal viewer. Like I said Mrviewer used to work perfectly for me. This must have been something new in recent updates.
-
Well, Djv_view and Photoshop shows the files perfectly, along with Blender's internal viewer.
-
Also some files are either too bright or too dark, I am unable to open images with correct color/gamma, I tried many images :(
-
Hi I do not see where I put an empty 8bit image default under 3dLuts? I disabled the ocio and I still get the same issue. Like I mentioned above, Xnview shows the image correctly (in the screenshot) but Mrviewer shows my images with extreme contrast.
-
Hi Try this https://filebin.net/uzge87e7iu59bhee I am not using any kind of lut or ocio stuff, everything has been default for a long time.
-
See the image below. The left side is Xnview the right side is MrViewer, as you see the image has extreme contrast with 4.2.8
-
2.4.5 is a bit better, but the gamme is still wrong for the srgb jpg. I have to adjust it to 0.55
-
Hi The picture shows the extreme contrasts. The actual picture has all kinds of shades and gradients. I have Nvidia. I will try 4.2.5 and let you know.
-
See the attachment
-
Hi Mr viewer has been opening the jpg files in totally wrong color and gamma space. this used to be working perfectly fine, I am not sure why Mrviewer start to mess up standard srgb images. Basically any jpeg file opened in Mrviewer comes with extreme contrast inthe viewer and no setting seems to help :( I am using mrViewer-v4.2.8-Windows-64
-
Well I did but I am lost, how am I supposed to debug a library that has almost 100k songs ;( I do not even know what I am missing. I am guessing that minidlna is passing songs with some non standard characters.
-
Hi I am using Mdlna on Debian testing 1.2.1 Everything seems to work except that I seem to be missing songs substantially. I added the same music folders (on Btrfs) to Cmus and Minidlna. All media is 777 Cmus 81481 songs Minidlna 80031 songs (based on the web interface) Now the difference might not seem alot given the amount of media but that is like 1450 songs missing if the stats are representational. This is hard to debug I do not even know what is missing what. Any ideas or recommendations?
-
@gga Thanks for the reply. I am not in hurry I can wait for 3.6.3 thanks
-
Hi I have 24 fps set in the preferences but whenever I open a sequence it is always setting it to 29. I am using winx64 3.6 thanks
-
@Alir thank you for the kick ass post
-
HI I have an ssd disk that has Win7 and Linux and couple pre existing partitions...
-
Hi I am piping some streams from a linux box using nc. I am able to use this stream...
-
Duplicity backend support?
-
Hi I have been backing up regularly and right now I want to revert my whole backed...
-
Hi Areca is great for recovering the latest version or recovering individual snapshots...
-
Hi I just installed the latest version on 64bit windows, and I am getting missign...
-
Hi Using the 32bit version solved my issue. Thanks
-
Hi Using the 32bit version solved my issue. Thanks
1