VeerK

You're correct, the channel selection commands before Device commands are extraneous. That being said, all of the other command as it is written is 100% correct and effective. To reiterate what I am doing: Copying Windows Left and Right into Left High and Left Low, Right High and Right Low. Pass Left Low as L and Pass Left High as R to Device #1, apply custom filters. Pass Right Low as L and Pass Right High as R to Device #2, apply custom filters. My only issue now is trying to find a lower latency...

Ah, that was just the regular one, BANANA version works perfectly! Juha, my friend, thank you very much for sharing your time with me, it helped me resolve the last little bit of my issue. EqAPO is a phenomenal software, and combined with VBanana, it is incredibly powerful. I now have a fully functional system-wide Digital XO, with quick editing on the fly using 2 separate ultra-low distortion DACs feeding 2 ultra-low distortion amps. Now, it's time to play with rePhase to make a finely-tuned XO,...

Hi Peter, you aren't spoiling anything, in fact the previous code I posted was incomplete, my mistake. I had to incorporate some of the code you previously shared to make a fully functioning config. I wouldn't have made any of this progress without your help, so thank you again. I will be supporting your Peace project to show my gratitude. I still have to test getting input from a source pc to a dedicated dsp pc, and then applying the below eq code to it, but I do think VBanana should help me solve...

Hi Peter, you aren't spoiling anything, in fact the previous code I posted was incomplete, my mistake. I had to incorporate some of the code you previously shared to make a fully functioning config. I am posting it here for you, in case you want to test it out: FINAL TESTED AND FUNCTIONING 2 DAC EQ RUNNING ON SOURCE PC Preamp: -5.2 dB Copy: LLOW=L LHIGH=L RLOW=R RHIGH=R Channel: LLOW LHIGH Device: Output A1 Voicemeeter Channel: LLOW # Low Pass Filter Commands Filter: ON LS Fc 105 Hz Gain 5.5 dB Filter:...

Ah, that was just the regular one, BANANA version works perfectly! Juha, my friend, thank you very much for sharing your time with me, it helped me resolve the last little bit of my issue. EqAPO is a phenomenal software, and combined with VBanana, it is incredibly powerful. I now have a fully functional system-wide Digital XO, with quick editing on the fly using 2 separate ultra-low distortion DACs feeding 2 ultra-low distortion amps. Now, it's time to play with rePhase to make a finely-tuned XO,...

Hi Juha, First of all, thank you for the fast response, it was immensely helpful diagnosing the issue! My previous code was functioning properly, and the code you wrote also functions 100% correctly, verified by looking at the Analysis Panel and the Frequency Response for L and R, on output A1 and output A2 (on top of the Editor Screen). It seems like EqAPO is functioning correctly! The problem seems to be that Voicemeeter is copying A1 to A2, so when applying the filters, the filters for A1 (Topping...

Hi Juha, First of all, thank you for the fast response, it was immensely helpful diagnosing the issue! My previous code was functioning properly, and the code you wrote also functions 100% correctly, verified by looking at the Analysis Panel and the Frequency Response for L and R, on output A1 and output A2 (on top of the Editor Screen). It seems like EqAPO is functioning correctly! The problem seems to be that Voicemeeter is copying A1 to A2, so when applying the filters, the filters for A1 (Topping...

Hi Juha, EqAPO has some difficulty outputting L and R to each device, it does the High and Low Pass filtering just fine for source L and R channels, but it gets confused to trying to send LLowPass and LHighPass to Voicemeeter A1 and RLowPass and RHighPass to Voicemeeter A2. As of right now, the code ignores RLowPass and RHighPass, and just sends LLowPass and LHighPass to both A1 and A2 outputs Any experience you can share is great!