Oh, I see now. Ardour is known for its timing errors with MIDI, that cause all sorts of glitches. I am using Attack, Sustain and Release at 0, but the decay is always non-zero. I think I'll try to come up with some test to see if I can reproduce this problem. The lengths of notes in Ardour didn't seem to affect this though. On Sun, Jun 21, 2020, 19:45 Rui Nuno Capela rncbc@users.sourceforge.net wrote: have you tried a sequence of the very same notes, very same duration and exactly the very same velocity?...
Umm, I don't think that's the case. If Samplv1's behaviour would be consistent, I'd just say I've programmed the patch wrong. But no, I set the envelopes to do what I wanted, but they randomly glitch out and play truncated notes. If I've set the envelopes wrong I would have the wrong sound every single time, not 50 or 20% of the times. I didn't enable a "randomly mess stuff up" option. At least not knowingly. That's why I'm reporting this as a software problem. On Sun, Jun 21, 2020, 11:53 Rui Nuno...
I think I might have. Is that a known issue? On Sat, Jun 20, 2020, 22:38 Rui Nuno Capela rncbc@users.sourceforge.net wrote: could it be that you have just a spike on the DCA EG ? ie. attack=0 followed by a very short decay? [tickets:#19] https://sourceforge.net/p/samplv1/tickets/19/ Samplv1 chokes randomly* Status: open Milestone: git_head Created: Sat Jun 20, 2020 06:40 PM UTC by unfa Last Updated: Sat Jun 20, 2020 06:40 PM UTC Owner: nobody Attachments: kick 2.flac https://sourceforge.net/p/samplv1/tickets/19/attachment/kick%202.flac...
Samplv1 chokes randomly
Thank you! On Mon, May 4, 2020, 20:55 Rui Nuno Capela rncbc@users.sourceforge.net wrote: also confirmed in qtractor but it seems to affect the GUI only; the plugins DSP and the generic stock UIs do show up the effective state of the controls labelled as "DCF1 Enabled" and "LFO1 Enabled", resp. will fix this soon, thanks [tickets:#18] https://sourceforge.net/p/samplv1/tickets/18/ DCF and LFO enable themselves back* Status: open Milestone: 0.9.14 Created: Mon May 04, 2020 10:19 AM UTC by unfa Last...
DCF and LFO enable themselves back
Oh, sorry. I created this ticket but I wasn't logged in.
Oh, sorry. I created this ticket but I wasn't logged in.
I was thinking about allowing copying with associated parameters like head cut, tail cut, makeup gain, channel panning and levels etc... 2018-05-16 22:52 GMT+02:00 SadKo sadko4u@users.sourceforge.net: Would be a simple copy/paste of a sample file name with popup menu useful? [tickets:#15] https://sourceforge.net/p/lsp-plugins/tickets/15/ Allow cut/copy/paste for samples* Status: open Milestone: 1.0.0 Created: Wed May 16, 2018 06:16 PM UTC by unfa Last Updated: Wed May 16, 2018 06:16 PM UTC Owner:...
Allow cut/copy/paste for samples
Allow switching between pre/post frequency analysis
The LV2 custom GUI doens't work in Ardour
Extract EQ10Q RTA as a separate analysis plugin
I read in the 7z man page that 7zip is not suitable for backups - as it doens't store extended attributes. So tar.7z or tar.xz seems like a good alternative. How does xz and 7z compression compare?
I'm trying to create a PDF file to print and test out inks on a certian medium. I...
Ok. I have terminated the job after about 4 hours. It showed progress, but looks...
Ok. I have terminated the job after about 4 hours. IT showed progress, but looks...
I disabled the "show toolpath" option and also closed the 3D preview window. PyCAM...
I tried turning off parallel processing, but PyCam still crashes. Looks like it ignores...
Crash when almost finished generating toolpaths: Broken pipe
Cannot convert anything: "No module named sk1libs.utils.fs" error
Thank you! I havefurther questions: So if BW Scale is > 100% each N-th harmonic has...
Hmmm. I'd have to understand what all variables here mean to analyze this code. Do...
Hmmm. I'd have to understadn what all variables here mean to analyze this code. Do...
Interesting! Is this a multipler applied to every n+1th harmonic in relation to n?...
Interesting! Is this a multipler applied to every n+1th harmonic in relation to n?...
Whoa! I tested this and it's really cool. Maybe the names of the items could be a...
Whoa! I tested this and it's really cool. Maybe the names of the items could be a...
PADsynth: different bandwidth for low and high harmonics
Indeed. Should I add new issues for Zyn there (in the Zyn-Fusion Issuea only repo)...
Another thing is: what to do with the internal Modulation Oscillators? Ditch them?...
ADDsynth modulation overhaul
ADDsynth modulation matrix
Yes, breaking backward compatibility is always a pain. I have an idea: The old mechanism...
Random function for oscillators (periodic noise wavetable)
Sweep across the harmonic table to change values
ADDSynth: Convert to Sine produces bad quality results
LFO frequency randomness having almost no effect?
Obsolete. I learned that all of this is already possible! External modulators worh...
Obsolete. I learned that all of this is already possible! External modulators worh...
I found out this request is obsolete, becasue this van be done using the external...
"ADDsynth" is called "ADsynth"?
Voice volume is not zero, when the volume slider is at 0
Maybe you're right - this doesn't need to be part of Zyn, and could really be a standalone...
Maybe you're right - this doesn't need to be part of Zyn, and could really be a standalone...
ADDsynth filter keyboard tracking ignores voice octave shift
Freehand waveshaper effect?
Display waveshaping function in distortion effect
I created a related issue in LMMS dev tracker: https://github.com/LMMS/lmms/issu...
The buffer of 32 samples sounds like much lower buffer than I expected. Maybe the...
Ok, again - I mixed up the synthesis engine names. I meant ADDsynth, where I wrote...
Argh. Yes, you're right. I mixed the names up.
Using a waveform to program ADDsynth
Allows SUBsynth oscillator parameters to change mid-note
Great! Thank you! :)
So you'll put the English names first and leave the German names afterwards? Like:...
Sigh. I've written a huge comment and it was lost :( TL;DR: As a user I want the...
I'm afraid that simply interpolating the values won't help us improve the LFO and...
Allow multi-operator modulation with SUBsynth voices
Sigh. I've written a huge comment and it was lost :( TL;DR: As a user I want the...
Give the plugins English names
This got me thinking of a different idea, that could be both simplier to implement...
This got me thinking of a different idea, that couldb e both simplier to implement...
This got me thinking of a different idea, that couldb e both simplier to implement...
Portamento creates gaps in note pitch
LFOs for ADDsynth Modulator amount and pitch
Well I mean a much simplified version without individual harmonics control. Howevere...
Harmonic filter
Great! I can't wait to try it out!
Portamento: Off, On or Auto
I wonder how resource-costly would it be to make ENS and LFOs be sample-accurate...
For comparison I attach a waveform of TAL Noisemaker's LFO at maximum rate (514.22...
I did a little test with the LFO too. It's the same problem. LFO can produce severe...
Ok, I tested out with a buffer size of 16 and 8 instead of default 256, and this...
Improve envelope quaility for short sweeps
What is more, those TAL filters are 4x oversampled and self-oscillating on high resonance...
Add TAL Noisemaker filters for their awesome sound
Noise source stereo width and different types
DC offset generator for ADDsynth
I can easily think of how this could work. In the freemode envelope editor window...
Add a new HP/LP filter type (not the same as bandpass!)
Sync LFOs to host transport
Envelope looping
Create a new FM engine for advanced modulation-table synthesis
I agree. Using heavy modulation on low-pitched notes can easily cause aliasing to...
Cannot use the Mac OS X .dmg package's VST plugins
Bring back old (linear) knob behaviour!
Provide a global LFO frequency and depth scaling control for live performance or sequencing
Drawing a line across the harmonics table to set the fader values
That's great! Let me know if I can help this issue, I could do some testing under...
I've created a related issue in LMMS/zynaddsubfx Github repository: https://gith...
Make all controls automatable in LMMS or Ardour
Actually a general-purpose dynamics processor unit would be very handful. I found...
EQ with a tiny spectrum analyzer
Oscilator sync feature? Sync modulation mode?
I never had problems with that, but it sounds just like I'd expect monophonic mode...
Ogg music won't play
Change interface's 0..127 knob values to relevant context numbers with proper units (dB, Hz, %)