Muhammad Luthfi

Hello, I'd like to configure my linecode parameters to set the emergency maximum capacity in watts instead of using emergamps for ampacity. Is there a way to do this?

Ah, that make sense. Thank you for your help~!

Greetings, OpenDSS Community, I am relatively new to OpenDSS and am currently facing a challenge that I hope someone here can assist me with. My project involves simulating the total electrical losses for each month over a year in a 4-bus system configuration. The catch is that I only possess the average monthly load data, all of which are connected to Bus 4. Below is the script I've compiled for this purpose: Clear new circuit.TestSystem ~ basekv=22.9 pu=1 phases=3 bus1=1 new linecode.x1 nphases=3...

Hello, thank you for your reply. Yes, i mistakenly added 0 as the kW value. and i tried to check with error descriptions as well~! Thanks

Sorry for the late reply, and Thank you for the detailed clarification and insights. Yes, it seems that i mistakenly run the solve function twice in my code and it turns out that the results are matched when i only run the solve function once. Thanks again.

Hello, I'm experiencing a discrepancy in the line losses reported by OpenDSS Direct and the COM Interface. I have a DSS file that, when run through both OpenDSS Direct and the COM Interface, yields slightly different results in line losses. The differences are small but significant (around 0.01 kW). Here is how I am running the simulation: * OpenDSS Direct Solution: I run the DSS file through OpenDSS Directly and view the losses via: The menu [Show] > [Losses]. * COM Interface: import win32com.client...

Hello, I'm experiencing a discrepancy in the line losses reported by OpenDSS Direct and the COM Interface. I have a DSS file that, when run through both OpenDSS Direct and the COM Interface, yields slightly different results in line losses. The differences are small but significant (around 0.01 kW). Here is how I am running the simulation: * OpenDSS Direct Solution: I run the DSS file through OpenDSS Directly and view the losses via: The menu [Show] > [Losses]. * COM Interface: import win32com.client...

Hello, I'm experiencing a discrepancy in the line losses reported by OpenDSS Direct and the COM Interface. I have a DSS file that, when run through both OpenDSS Direct and the COM Interface, yields slightly different results in line losses. The differences are small but significant (around 0.01 kW). Here is how I am running the simulation: * OpenDSS Direct Solution: I run the DSS file through OpenDSS Direct and view the losses via: The menu [Show] > [Losses]. * COM Interface: import win32com.client...