Marco Lopez

Good morning, I am trying to build a heat capacitor using a tank and a heat exchanger. it´s a dynamic simulation , where one of the currents is connected in series with a Tank/(heater with no energy inlet) and a heat exchanger and then a closed loop and the other current is in an open circuit, but when the simulation runs the equilibrium temperature in steady state becomes something in between both temperatures, but that should not be the result, since all the outlet temperature should tend to the...

here some images: the initial temperature is 80°C and it should go to 20°C in steady state

Good morning, I am trying to build a heat capacitor using a tank and a heat exchanger. it´s a dynamic simulation , where one of the currents is connected in series with a Tank/(heater with no energy inlet) and a heat exchanger and then a closed loop and the other current is in an open loop, but when the simulation runs the equilibrium temperature in steady state becomes something in between both temperatures, but that should not be the result, since all the outlet temperature should tend to the inlet...

here some images: the initial temperature is 80°C and it should go to 20°C in steady state

here some images

Good morning, I am trying to build a heat capacitor using a tank and a heat exchanger. it´s a dynamic simulation , where one of the currents is connected in series with a Tank/(heater with no energy inlet) and a heat exchanger and then a closed loop and the other current is in an open loop, but when the simulation runs the equilibrium temperature in steady state becomes something in between both temperatures, but that should not be the result, since all the outlet temperature should tend to the inlet...