Activity for Ilgrank
-
Ilgrank posted a comment on discussion Help
Whoops :) Read your post too late. The sync completed after 14 hours.. but it did complete without errors. So, checking the help, indeed -F forced a Full Resync of the array.. well, I hope I had no Read error during the process.. Just out of curiosity.. since I do still have the original drives,parity and content files.. If you were me, would you just copy the old parity and content file over and do a re-sync? Thanks guys!
-
Sorry for the double post :/
-
Update: Seems to be doing a full parity? (how do I get for certain?) Since after 5 hours is at 50%..
-
Update: Seems to be doing a full parity? (how do I get for certain?) Since after 5 hours is at 50%..
-
whoops.. it was existing, but permissions were insufficient. Fixed that, I was prompted with Too many disks have UUID changed from the latest 'sync'. If this happens because you really replaced them, you can 'sync' anyway, using 'snapraid --force-uuid sync'. Instead, it's possible that you messed up the disk mount points, and you have to restore the mount points at the state of the latest sync. I re-run then with snapraid -E -F --force-uuid sync and now it is running.. fingers crossed since I don't...
-
whoops.. it was existing, but permissions were insufficient. Fixed that, I was prompted with Too many disks have UUID changed from the latest 'sync'. If this happens because you really replaced them, you can 'sync' anyway, using 'snapraid --force-uuid sync'. Instead, it's possible that you messed up the disk mount points, and you have to restore the mount points at the state of the latest sync. I re-run then with snapraid -E -F --force-uuid sync and now it seems to be running.. fingers crossed since...
-
yep, it is existing and it is empty
-
Thanks Leifi and David! @Leifi: I tried first your suggestion: snapraid sync -E -F but as you guessed, it is still complaining about the missing disk. Even adding a 'fake' disk as an empty directory in a non-snapraid disk fails tho: L:\>snapraid sync -E -F Self test... Error accessing 'disk' 'L:\W\' specification in 'L:/W/' at line 37 @David : Recalculating the entire parity is surely an option, but I would take it as a last resort.. Thanks!
-
Hello everyone! I have recently moved from a 5x2Tb drives (4 data, 1 parity) to a 4x4Tb setup (3 data, 1 parity) I have copied all of the data from the old to the new disks,including the content files. Some data of course got shuffled around when going 4->3, but I was thinking that a simpele sync would have recognized the moved files from their hash. I have updated the snapraid.conf file, but still snapraid complains about the missing disk: Disk 'd04w' with uuid 'ce9d3e91' not present in the configuration...
-
Hello everyone! I have recently moved from a 5x2Tb drives (4 data, 1 parity) to a 4x4Tb setup (3 data, 1 parity) I have copied all of the data from the old to the new disks,including the content files. Some data of course got shuffled around when going 4->3, but I was thinking that a simpele sync would have recognized the moved files from their hash. I have updated the snapraid.conf file, but still snapraid complains about the missing disk. I'm missing some step? What else do I need to do in order...
-
found the culprit :( (Sorry, my fault of not noticing before) There was an hidden folder with ~700k files on one of the disks That was causing the massive overhead. Using a smaller (128 or 64k) block size would help? Any side effect?
-
Hi Recycle bin is set to 0 bytes on all drives The disk with the highest number of files has 8751 files
-
Thanks Leifi Did that (took 8 hours to complete) and the situation didn't change much: Data Drive 1: 1305GB Free Data Drive 2: 187GB Free Data Drive 3: 189GB Free Parity Drive 1: 44GB Free (was: 8GB Free) Btw, I HAD to force realloc otherwise a Sync would not complete (unless, as I did, I removed some of the data on the data disks)
-
Hello everyone I understand the block size (256kb) can cause fragmentation, but I've got mostly large (>8Gb) files and still my parity drive is now full. I've got 4x5TB drives, one of them being Parity and the other being data. The situation is as follows: Data Drive 1: 1305GB Free Data Drive 2: 187GB Free Data Drive 3: 189GB Free Parity Drive 1: 8GB Free ..and I had to delete some files from one of the data drives in order to complete a sync, otherwise I would have been out of parity. Isn't this...
-
Hi I have some 32bit machines, and it seems that your compiled version is for 64bit...
-
Stefan was so kind and he spent a good part of the morning helping me find out what...
-
Thanks for you offer Stefan, I've sent you a private message thanks!
-
Hi Stefan Thanks for the update Installed the new (2.2) library, but I still get...
-
Thanks Steve! :)
-
Ehm.. sorry but can we have an official RC list? :) Thanks
-
Thanks Steve.. you share my pain :) I had alrady log parsing in place, hence my doubt...
-
Hi Every now and then, but not always it seems (of course, it's just me not understanding...
-
Hi Stefan It's a hardware (ie: non software) device. It is a energy meter. But please...
-
Hi Stefan Sorry for the double post, I had fear of having been unnoticed :) Thanks...
-
Hi Stefan Sorry for the double post, I had fear of having been unnoticed :) Thanks...
-
Hi Stefan Sorry for the double post, I had fear of having been unnoticed :) Thanks...
-
Hi Stefan Sorry for the double post, I had fear of having been unnoticed :) Thanks...
-
..please, I'm just asking for a little bit of support. If there was some RTU example...
-
To be more specific, the read should return two 16 bits registers, using other tools...
-
To be more specific, the read should return two 16 bits registers, using other tools...
-
To be more specific, the read should return two 16 bits registers, using other tools...
-
Thanks Stefan! It was it! Now I can read correctly! About the values returned.. I...
-
Sorry but I don't get you. If I initialize the client this way: Add-Type -Path .\EasyModbus.dll...
-
Sorry but I don't get you. If I initialize the client this way: Add-Type -Path .\EasyModbus.dll...
-
Sorry but I don't get you. If I initialize the client this way: Add-Type -Path .\EasyModbus.dll...
-
Hello everyone I'm trying to use EasyModbus .NET as an RTU client but I really can't...
-
Hello everyone I'm trying to use EasyModbus .NET as an RTU client but I really can't...
-
Hello everyone I'm trying to use EasyModbus .NET as an RTU client but I really can't...
-
Hello everyone I'm trying to use EasyModbus .NET as an RTU client but I really can't...
-
Hello everyone I'm trying to use EasyModbus .NET as an RTU client but I really can't...
-
Hello everyone I'm trying to use EasyModbus .NET as an RTU client but I really can't...
-
Hello everyone I'm trying to use EasyModbus .NET as an RTU client (which seems to...
-
Hello everyone I'm trying to use EasyModbus .NET as an RTU client (which seems to...
-
Hello everyone I'm trying to use EasyModbus .NET as an RTU client (which seems to...
-
Hello everyone I'm trying to use EasyModbus .NET as an RTU client (which seems to...
-
HiI tried to install on Openelec 6.9.5 but with no success.I did it via cli, downloaded...
-
Thanks Leifi ..so if I understand correctly, using the same cluster size and snapraid...
-
Hi Guys thanks for the in-depth discussion. I've 4x3Tb drives: 2 of them filled with...
-
Hi I have data storage needs mainly about static large files. All the drives are...
-
Hi I have data storage needs mainly about static large files. I have only data I...
-
Hi I have data storage needs mainly about static large files. I have only data I...
-
Hi I have data storage needs mainly about static large files. I have only data I...
-
I'm planning a disk upgrade, but since I've fallen several times in the problem of...
-
Hi Jens Thanks for your reply No, I'm on Windows 7 exploring the log I've found some...
-
Hi Jens Thanks for your reply No, I'm on Windows 7 exploring the log I've found some...
-
Hi Today I found that menacing error in my snapraid log.. I've looked everywhere...
-
Thanks Jens So basically, the advantage is that you can work on disks with ongoing...
-
Hi Jens Downloaded the script, and tried to get some information on VSS here: http://technet.microsoft.com/en-us/library/cc785914(v=ws.10).aspx...
-
Thanks Andrea! Upgrading to 5.3 fixed the problem. I should have upgraded first,...
-
Hi I'm using Snapraid 5.0 and I've stumbled upon this error: Failed to grow parity...
-
Hi I'm using Snapraid 5.0 and I've stumbled upon this error: Failed to grow parity...
-
Just out of curiosity, would not be simplier (in fact, that's the way I'm doing since...
-
@Amishman: the EventLog refers to Windows Event Log: Just run Win+R -> eventvwr.msc...
-
mmm so let's say we have an automated script (the linux or the windows one) which...
1
