Hello Rabit

Hello Powerlink-team Kalycito , First of all thank you for your kind information. I have succesfully tested Powerlink Kernel mode driver edrv-8111. Presently, I am working with oplkemacpsmn driver for Digilent ZedBoard. I am using 4.14.0-xilinx kernel in PetaLinux and openPOWERLINK_V2.6.2 => information from ethtool is as follow: root@Powerlink_Node:/home/oplkdrv_kernelmodule_edrv# ethtool -i eth0 driver: macb <----------- Its not emacps anymore ----------- version: firmware-version: expansion-rom-version:...

Hello Powerlink-Team-Kalycito, Thank you for your quick responce. I tried the same with edrv-i210.c edrv-82573.c and edrv-8255x.c too. But none is working and throwing same error. Please inform me about any update on it as soon as possible. Thank you in advance.

Hello Powerlink-team Kalycito, Thank you for your reply. Can you please let me know, wether Intel I219-LM (Vendor ID - 0x8086, Device ID - 0x156f) Ethernet NIC is supported by openPOWERLINK_V2.6.2 or not? I compiled edrv_82573 and tried to install it into the kernel (4.15.0-42-generic) on Ubuntu 18.04.1 LTS. Despite of working hard on it, I am getting error while doing following: $sudo ./plkload oplk82573mn.ko Check if high resolution timer support is available... OK Failed No network interfae controller...

Hi all, I try to run openPOWERLINK_V2.6.2 console_mn_demo on Xilinx Zed Board. For that I compiled PetaLinux and run it on Zed Board. I am struggling with modifying device tree file for the same and have not much knowledge about it. Macb is the Ethernet Driver provided by the xilinx kernel. I would really appreciate any help to run the demo app on Zed Board from the comunity. Thank you.

Hi all, I try to run openPOWERLINK_V2.6.2 console_mn_demo on Xilinx Zed Board. For that I compiled PetaLinux and run it on Zed Board. I am struggling with modifying device tree file for the same and have not much knowledge about it. Macb is the Ethernet Driver provided by the xilinx kernel. I would really appreciate any help to run the demo app on Zed Board from the comunity. Thank you.

Hi all, Two days ago I posted an issue with my development as can be seen above. But the status of the post is "Post awaiting moderation." I do not understand what is wrong with it. Someone please help me to solve this problem. Thank you.