Eric L. Edberg

Steve Porter: Thanks for updating Mochad to v21. I decided to begin the process of moving mochad from my legacy RPI 2B which has been running reliably for 5 years with mochad 1.0-17. Tried compiling it on my new RPI 5 which failed due to the errors you fixed. I use a custom shell script to monitor the output of mochad, parse it's results, and trigger a remote (WebThing) action when X10 button presses are obtained. It's worked flawlessly for many years and mochad continues to work. I've also use Home...

Thanks for the feedback. Was able to verify Mochad worked as expected for basic on/off testing on the RPI and have moved on to thinking about how to manage mochad; am leaning toward using NodeJS since there are numerous TCP R/W stream examples around and it can emulate an http endpoint allowing me to use the Mozilla IOT -> HTTP add-on to initiate remote mochad commands. Also, the reference you provided above does not work, but I googled and found this discussion about the issue here: https://git...

Hello: J. Jones... I recently build a RPI 2B+ and am attempting to interface my Mozilla IOT gateway controller with Z-Wave devices to my legacy CM15 so it can control them too. I've built mochad and will attempt to plug the CM15 into my RPI soon but found this report when researching. Q: did you run into any issues with the "cast int" change or have any other hints about using mochad on a RPI? Q2: I don't know, but you might: Does the CM15 output/mirror X10 commands it detects into mochad? If I can...