Gert

Hi, I have this new image from a Canon 300mm F4 lens and ASI2600MC camera. Astap fails to solve it. This is the first time I am using this lens. Before I have used the 10" F4 Newtonian and Astap always did a good solve on these images. Now it fails. I am no doing anything different. I save the image from PI and load into Astap. Visually it looks OK. The image comes from PixInsight where the PI Gaia script did solve it with no problem. The solve was used in SPCC and then saved to xisf. The file header...

Hi, Yes, most recent experiment was done with : clonezilla-live-20240624-oracular-amd64.iso BTW, please remember to use amd64 (x86-64) release. Do not use i686 one since it's only for very old machine. Cheers, Gert

Hi, Yes, most recent experiment was done with : clonezilla-live-20240624-oracular-amd64.iso BTW, please remember to use amd64 (x86-64) release. Do not use i686 one since it's only for very old machine.* Cheers, Gert

Hi Steven, Thanks for helping. Below debug results Using: sudo -i cat /proc/partitions > /home/partimag/cz.dbg mount >> /home/partimag/cz.dbg major minor #blocks name 7 0 424648 loop0 8 0 124999680 sda 8 1 522208 sda1 8 16 1953514582 sdb 8 17 1953512448 sdb1 sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) udev on /dev type devtmpfs (rw,nosuid,relatime,size=7984436k,nr_inodes=1996109,mode=755,inode64) devpts on /dev/pts type devpts...

Hi Steven, Start with PC power off all devices unplugged. Insert USB3 stick with clonezilla boot. Power up PC, hit function key to enter boot menu Select USB3 stick for boot Boot clonezilla Chose usual settings of operation When prompted insert external USB HDD (ntfs format 2T disk) Once ready chose device id of external USB HDD for partition backup Chose M.2 NVME SSD (installed internally on PC motherboard) as source drive Launch copy Copy runs for appreciable time and shows the usual progress bars...

Hello All, Using this ISO : clonezilla-live-20240624-oracular-amd64.iso Clonezilla is run via USB stick boot on win10 desktopPC with OS on m.2 NVME SSD. All the steps complete fine and there is activity on the connected external USB HDD and progress of saving the image is on screen. **After power-down however the USB HDD folder for clonezilla is empty when checked on other PC! Why is that happening? Thanks, Gert

@steven_shiau Thanks for the recommendations. Trying ISO : clonezilla-live-20240624-oracular-amd64.iso Still no recognition of the SSD. Adding info from lsblk and nvme tool. I am also not finding any reference to the SSD name in dmesg or hwinfo. Thanks, Gert

@steven_shiau Thanks for the recommendations. Trying ISO : clonezilla-live-20240624-oracular-amd64.iso Still no recognition of the SSD. Thanks, Gert