Activity for Cadux
-
Cadux posted a review on ksnip
-
Hi I store - in Ditto GROUPS - template texts (signatures, address, emails, etc.). When I need to delete clip data, it would be really great if the column GROUPS appears in the dialog, since I always want to delete everything but clips in GROUPS. I've attached a snapshot simulating column GROUPS appearing in the dialog. Somehow, this suggestion relates to this older thread (How to delete only clips which aren't part of a group?): https://sourceforge.net/p/ditto-cp/discussion/287511/thread/27113867/?limit=25#b4b0...
-
Hi, I couldn't see how to make GLOBAL the shortcut set to "connect/disconnect from clipboard". Is it possible? How to? Thanks for assistance!
-
The F5 available to be set as custom shortcut is misleading, since it doesn't work: http://bit.ly/2OurYkL Actually, I couldn't find out any behavior for F5. Could you please inform what is the F5 default behavior? How should it be used for? Thank you!
-
Hi. Just following up, could you please inform if this functionality was added to Ditto roadmap? Thanks, Carlos
-
Hi, When I copy>paste multiple clips, the pasted content separates clips with ------- Example: Clip 1 Clip 2 How can I change/remove separator ------- ? Thanks for help! Carlos
-
Thanks for replies! @Maloney, it would be great if you could implement a way to not delete clips stored in groups. Many times we have hundreds of clips to manually delete, and it is dificult, time consuming and demand lots of attention to skip by "eye" the clips with a pictogram, as mentioned by @RainrooM. Anyway, Ditto is the handiest clipboard app I've seen!
-
Hi, Among my Ditto the the supported image types (options>supported types) are PNG and CF-DIB. If I have set just PNG images are copied into Ditto then from Ditto into other apps keeping transparence (alpha). However, if CF-DIB is also in the supported types, together PNG, Ditto will prioritize CF-DIB always. I mean, the PNGs with transparency (alpha) aren't handle by Ditto anymore, although you can see in clip properties that the clip has both formats as "copy formats". Is it possible to prioritize...
-
Hi, I'm using Ditto to store favorite texts (signatures, address, email templates, etc.), storing them into specific groups. Now I have these favorites plus hundreds of normal clips which I would like to delete, but I couldn't see how to select only clips which aren't part of a group for deleting only those. Is it possible? How to? Thanks for assistance, Carlos
-
Can SageThumbs 2.0.0.23 create SVG thumbs already? Thanks
-
It seems there is heritage of reminders from child to parent nodes, and the root node will always have a reminder icon if any child in the map is with reminder icon due to. So what seemed a bug sounds as Freeplane default behavior. Issue solved!
-
Sort node by priority and modified time
-
Hi, It seems to be not so easy to implement sorting by priority through scripting, so I created a formal feature request since many users that deals with project/task management could benifit from this feature: https://sourceforge.net/p/freeplane/featurerequests/2408/ In the feature request I also mentioned the possibility implement sort by "Modified time". It is possible to see/sort "modified time" through Freeplane "search and replace" tool, but a native sorting direct on the nodes would be handier....
-
Sort node by priority and modified time
-
Can't remove reminder for some nodes
-
Hi, I'd appreciate help. As showed in the snapshot below, although Nodes "!INFO" and "ZZBASE" have reminders set, they aren't list in "manage task" and I can't "remove reminder" since this functionality isn't available for those nodes (menu is shaded/grey). Any idea how to remove reminders icon for those nodes? Thanks for assistance! Carlos_Cadu
-
Hey guys, Any idea about a script syntax to sort children by priority? Desirable sorting based on icon name: full-0 full-1 full-2 full-3 ... full-9 any other icon no icon Many thanks!
-
Hey guys, Any idea about a script syntax to sort children by priority and progress? Desirable sorting based on icon name: full-1 full-2 full-3 ... full-9 full-0 0% 25% 50% 75% 110% any other icon no icon Many thanks!
-
Hi zenny, I'm afraid it isn't possible for now. In order to create that link you need Zotero for Firefox and the addon Zotifile. Since Zotero 5 was released, they stoped producing the Firefox version. Just standalone now. There is some hope this functionality be restored in the standalone version, but depends totally on Zotfile addon development: https://forums.zotero.org/discussion/64766/beta-5-possible-open-extracted-annotations-from-zotifile-direct-in-pdf-reader-software#latest Cheers!
-
Hi zenny, I'm afraid it isn't possible for now. In order to create that link you need Zotero for Firefox and the addon Zotifile. It doesn't work with the Standalone version. By the way, since Zotero 5 was released, they stoped producing the Firefox version. Just standalone now. There is some hope this functionality be restored in the standalone version, but depends totally on Zotfile addon development: https://forums.zotero.org/discussion/64766/beta-5-possible-open-extracted-annotations-from-zotifile-direct-in-pdf-reader-software#latest...
-
Thanks for directions guys! After adjusting the script, I'm still having same error. I tried two variations of the script: changing \ to double-backslash: def image_filename = node.externalObject.getUri() def my_external_image_viewer = "C:\\Program Files (x86)\\TechSmith\\Snagit 13\\SnagitEditor.exe" def full_command = my_external_image_viewer + " " + image_filename println full_command.execute().text . using single quotes to delimit the string: def image_filename = node.externalObject.getUri() def...
-
Thanks for directions guys! After adjusting the script, I'm still having same error. I tried two variations of the script: changing \ to double-backslash def image_filename = node.externalObject.getUri() def my_external_image_viewer = "C:\\Program Files (x86)\\TechSmith\\Snagit 13\\SnagitEditor.exe" def full_command = my_external_image_viewer + " " + image_filename println full_command.execute().text . using single quotes to delimit the string def image_filename = node.externalObject.getUri() def...
-
Thanks for directions guys! After adjusting the script, I'm still having same error. I tried two variations of the script: changing "\" to "\" def image_filename = node.externalObject.getUri() def my_external_image_viewer = "C:\\Program Files (x86)\\TechSmith\\Snagit 13\\SnagitEditor.exe" def full_command = my_external_image_viewer + " " + image_filename println full_command.execute().text . changing " to ' def image_filename = node.externalObject.getUri() def my_external_image_viewer = 'C:\Program...
-
Thanks for directions guys! After adjusting the script, I'm still having same error. I tried two variations of the script: changing \ to \ def image_filename = node.externalObject.getUri() def my_external_image_viewer = "C:\\Program Files (x86)\\TechSmith\\Snagit 13\\SnagitEditor.exe" def full_command = my_external_image_viewer + " " + image_filename println full_command.execute().text . changing " to ' def image_filename = node.externalObject.getUri() def my_external_image_viewer = 'C:\Program Files...
-
Thanks for directions guys! After adjusting the script, I'm still having same error. I tried two variations of the script: changing \ to \ def image_filename = node.externalObject.getUri() def my_external_image_viewer = "C:\\Program Files (x86)\\TechSmith\\Snagit 13\\SnagitEditor.exe" def full_command = my_external_image_viewer + " " + image_filename println full_command.execute().text changing " to ' def image_filename = node.externalObject.getUri() def my_external_image_viewer = 'C:\Program Files...
-
Thanks for directions guys! After adjusting the script, I'm still having same error. I tried two variations of the script: changing \ to \ def image_filename = node.externalObject.getUri() def my_external_image_viewer = "C:\\Program Files (x86)\\TechSmith\\Snagit 13\\SnagitEditor.exe" def full_command = my_external_image_viewer + " " + image_filename println full_command.execute().text changing " to ' def image_filename = node.externalObject.getUri() def my_external_image_viewer = 'C:\Program Files...
-
Thanks for feedback zipizap. Looking forward to using FreeplaneJrubyInstaller! All the best with the development! If anyone can help with a groovy script for sorting children by priority it is very welcomed.
-
Many thanks for directions for the script zipizap! I've started learning scripts, but my knowledge is still limited. I'd appreciate a further help to achieve the script syntax. Taking as references the icons full-1, full-2 and full-3, what would be the script to sort the children nodes in the following order: full-1 full-2 full-3 any other icon no icon
-
Hi, In SimplyHTML note pane there are default shortcuts for coloring text that I'd like to change: Red: ctrl+R Blue: ctrl+L Green: ctrl+G Does anyone know if it is possible those shortcuts in SimplyHTML? Thanks for info! Carlos_Cadu
-
Many thanks for the script zipizap! I receiving the message "Error executing the script: null". The log is attached. After having enabled the permitions in Tools/Preferences/Plugins I performed the following script (adapted to Snagit which I would like to launch from Freeplane: def image_filename = node.externalObject.getUri() def my_external_image_viewer = "C:\Program Files (x86)\TechSmith\Snagit 13\SnagitEditor.exe" def full_command = my_external_image_viewer + " " + image_filename println full_command.execute().text...
-
Hi. In menu>edit>move sort there is the option "sort children", which seems to sort just alphabetically. Is it possible to sort children by icon "priority" or "progress"? Maybe through script? Thanks for info!
-
Thanks for feedback! I'm trying to speed up the opening of images in my default external editor, same already vinculated by the system/windows. It seems double click image doesn't launch the external viewer. If Freeplane could do that it would be great (1 visual step). Currently, I need to richt click image in Freeplane then "open in viewer" (2 visual steps). So the remaining way seems to be the script (1 key step). By chance do know a script that directly call "open in viewer" command for any image...
-
Many thanks for the script Luigi Kang!
-
Hi, "Open in viewer" command appears when you right click a image. I couldn't find this command in any menu. Does anyone know if it is possible to set shortcut to "open in viewer"? Maybe it can be achieved through script? Many thanks for help!
-
Hi, "Open in viewer" command appears when you right click a image. I couldn't find this command in any menu. Does anyone know if it is possible to set shortcut to "open in viewer"? Maybe it can be achieved throught script? Many thanks for help!
-
Hi. Is it possible to add the command "center selected node" to the script? The idea is to zoom to 100% then "center selected node" in same script. Thanks!
-
Thanks for the script! I'd also suggest zoom to 100% be added in the default toolbar, in order less experienced users can take advantage of the feature too.
-
Thanks!!!
-
Hi. In MindManager 2017 it was implemented an interactive map (read-only) which is exported as HTML5. The function is illustrated in this video: https://www.youtube.com/watch?v=pGXnOG86eLA What about an interactive map HTML5 export format in Freeplane 1.7? Cheers!
-
With this new feature the presentation possibilities grow exponentiality! Thanks for implementing it!
-
Thanks for info Alexandre. The Excel output did work for me!
-
It sounds like I'm probably the only one who might benefit. I also share the need for the functionality requested by Ken. The usage is for presentation purposes indeed, considering it would allow to easily hide the arrow heads too. If I need to say to an audience to not consider that arrow heads, or even if I don't say anything but someone in the audience asks what that triangles means, it weakens the presentation flow and requests unnecessary explanations. Actually, I would suggest two functionality...
-
It sounds like I'm probably the only one who might benefit. I also share the need for the functionality requested by Ken. The usage is for presentation purposes indeed, considering it would allow to easily hide the arrow heads too. If I need to say to an audience to not consider that arrow heads, or even if I don't say anything but someone in the audience asks what that triangles means, it weakens the presentation flow and requests unnecessary explanations. Actually, I would suggest two functionality...
-
Hi, I'd appreciate help for handling two situations: a) When I copy a node with attributes and paste into MS Word, the attributes contents aren't pasted. Is it possible to copy all attributes from a node and paste into Word? b) Can I export attributes in CSV format? Thanks for info! Carlos_Cadu
-
Treat connector labels as attributes, allowing to select default values
-
Develop "Connector Manager" tool
-
Improve connectors heads when lines are hidden to reflect correct/actual directions
-
Hi Dimitry. I've attached all requested files. Since I'm using portable version, I took them from "FreeplanePortable\Data\Freeplane\1.6.x". Thanks!
-
Attribute "optimal width" not working through mouse right click
-
Issue solved! I create a blank map, then copied all content from the other map. The undesirable attribute simply disappeared after that.
-
Hi, I'd appreciate help. I created a presentation for "lecture" have certain amount of slides. Then I need to send to students that presentation (through "export presentation to PNG"), but I'd like to set some slides differently, including the placement of the nodes. In this very moment I feel the need to create a new presentation based on that presentation for "lecture", what would be a great time saving. Is it possible to create a new presentation based on an existing presentation, being all slides...
-
Hi, I'd appreciate help. I created a presentation for "lecture" have certain amount of slides. Then I need to send to students that presentation (through "export presentation to PNG"), but I'd like to set some slides differently. In this very moment I feel the need to create a new presentation based on that presentation for "lecture", what would be a great time saving. Is it possible to create a new presentation based on an existing presentation, being all slides transferred/loaded from existing...
-
Many thanks for reply Dimitri. I saved/reopen the map, and one of the undesirable attributes has gone. I could understand the general idea that when there is no attribute attached to an actuall node it won't remain in the map, since after reopening the map the orphan attributes will be cleaned. However, there is other attribute that is still being listed in the map, even it doesn't exist in any actual node. As showed in this screen-recording - https://goo.gl/Kgiqdn - I searched for this attribute,...
-
Many thanks for reply Dimitri. I saved/reopen the map, and one of the undesirable attributes has gone. I could understand the general idea that when there is no attribute attached to an actuall node it won't remain in the map, since after reopening the map the orphan attributes will be cleaned. However, there is other attribute that is still being listed in the map, even it doesn't exist in any actual node. As showed in this screen-recording - https://goo.gl/Kgiqdn - I searched for this attribute,...
-
Hi, I'd appreciate help. I created some test attributes, which I could delete from the nodes they were attached. However, even after that, attributes are still existing and being listed by the map, for instance when I insert new attributes to other nodes or through the attribute manager too (image below). I also recorded my screen showing the issue: https://goo.gl/zmlFGF How to delete attributes from map list completely? Thanks! Carlos_Cadu
-
Hi, I'd appreciate help. I created some test attributes, which I could delete from the nodes they were attached. However, even after that, attributes are still existing and being listed by the map, for instance when I insert new attributes to other nodes or through the attribute manager too (image below). I also recorded my screen showing the issue: https://goo.gl/zmlFGF How to delete attributes from map list completely? Thanks! Carlos_Cadu
-
Hi, I'd appreciate help. I used several images in a map, which are stored in C:\Image. The map itself is stored in C:\Map. Even I keep image source unchanged (C:\Image), when I save the map to any other location than C:\Map, all linked images became broken (snapshot attached). I also recorded my screen showing the issue: https://goo.gl/DiA7dA How to save map to different location without breaking linked images? In other words, I'd like to keep the images appearing in my map. Thanks for assistance!...
-
Hi, I'd appreciate help. I used several images in a map, which are stored in C:\Image. The map itself is stored in C:\Map. Even I keep image source unchanged (C:\Image), when I save the map to any other location than C:\Map, all linked images became broken (snapshot below). I also recorded my screen showing the issue: https://goo.gl/DiA7dA How to save map to different location without breaking linked images? In other words, I'd like to keep the images appearing in my map. Thanks for assistance! ...
-
Hi, With advanced presentation possibilities of Freeplane 1.6, I've given lectures basically using a presentation remote control (this one: https://goo.gl/zmtIXE). I'm almost not using keyboard or mouse anymore. In order all remote buttons match Freeplane presentation commands, I created an AHK script (attached). This first video explores the basics of how to use the AHK script: https://goo.gl/Qy5VSP This second video explores the remapped keys and how they are used in real presentation context:...
-
Thanks for reply zipizap. Handy shortcut! In the menus: Navigate>Link>Follow Link
-
Thanks for reply zipizap. Handy shortcut!
-
Hey Jerome. Many thanks for sharing the script! I never used AHK functionality to search image so far. I'm already thinking on the many workflows it will improve! Cheers, Carlos
-
Hi, With advanced presentation possibilities of Freeplane 1.6, I've given lectures basically using a presentation remote control (this one: https://goo.gl/zmtIXE). I'm almost not using keyboard or mouse anymore. In order all remote buttons match Freeplane presentation commands, I created an AHK script (attached). This first video explores the basics of how to use the AHK script: https://goo.gl/Qy5VSP This second video explores the remapped keys and how they are used in real presentation context:...
-
Hey Ken. btw - to make the remote work, did you have to do anything other than set Preferences > Presentation > navigation keys control presentation (checked)? Please, check this thread explaining how the remote works with Freeplane: https://sourceforge.net/p/freeplane/discussion/758437/thread/306f5342/
-
Hi, With advanced presentation possibilities of Freeplane 1.6, I've given lectures basically using a presentation remote control (this one: https://goo.gl/zmtIXE). I'm almost not using keyboard or mouse anymore. In order all remote buttons match Freeplane presentation commands, I created an AHK script (attached). This first video explores the basics of how to use the AHK script: https://goo.gl/Qy5VSP This second video explores the remapped keys and how they are used in real presentation context:...
-
Hi, With advanced presentation possibilities of Freeplane 1.6, I've given lectures basically using a presentation remote control (this one: https://goo.gl/zmtIXE). I'm almost not using keyboard or mouse anymore. In order all remote buttons match Freeplane presentation commands, I created an AHK script (attached). This first video explores the basics of how to use the AHK script: https://goo.gl/Qy5VSP This second video explores the remapped keys and how they are used in real presentation context:...
-
Hi, With advanced presentation possibilities of Freeplane 1.6, I've given lectures basically using a presentation remote control (this one: https://goo.gl/zmtIXE). I'm almost not using keyboard or mouse anymore. In order all remote buttons match Freeplane presentation commands, I created an AHK script (attached). This first video explore the basics of how to use the AHK script: https://goo.gl/Qy5VSP This second video explore the remapped keys and how they are used in real presentation context: https://goo.gl/vaSMWw...
-
Hi, With advanced presentation possibilities of Freeplane 1.6, I've given lectures basically using a presentation remote control (this one: https://goo.gl/zmtIXE). I'm almost not using keyboard or mouse anymore. In order all remote buttons match Freeplane presentation commands, I created an AHK script (attached). This first video explore the basics of how to use the AHK script: https://goo.gl/Qy5VSP This second video explore the remapped keys and how they are used in real presentation context: https://goo.gl/vaSMWw...
-
Thanks for reply Ken! I notice in your screenshot that the "always open this app..." is not checked. Actually, I always check this, but next time I run the link the "always open this app..." is not checked again. So it seems Windows is always forgetting it in my case, and this should be the problem.
-
Hi, I'd appreciate help. I'm using Freeplane 1.6.2. As showed in the image attached, always I click on a link with image, audio or video, instead of being launched directly through the respective Windows default application, there is a screen pop-up asking "how do you want to open this file". I was expecting the links launching the applications directly, without that intermediate screen. Actually, all the default applications are already set in Windows 10, and if I run the same Freeplane linked files...
-
Hi, With advanced presentation possibilities of Freeplane 1.6, I've given lectures using a presentation remote control basically. Very few needs of using keyboard, and the mouse is needed only when there is a link (in my case mostly for triger/launch linked videos). I couldn't realized other way in Freeplane to launch/trigger links other than mouse clicking on the link icon. Is there any way to launch/trigger links, for instance by using a keyboard shortcut? Since I'm using a multimedia remote control...
-
Same issue here, as showed in the attached image. Size of link icon determined by "toolbar icon height" in preferences causes the problem to achieve a reazonable size of link icon in the map makes the icons in toolbar quite small. a) Would it be possible to deattach link size from toolbar icon height? (b) Would it be possible to set link size by using regular icon size in properties panel? (c) Another suggestion is to allow setting size of link icon independent of other icons. I mean, to have available...
-
Many thanks for the impressive improvements in 1.6.2 (+ 1.6.1_21). Also impressive the development pace and feedback to users requests!
-
Thanks for implemented feature! Already using. Quite handy.
-
Thanks for feature implemented!
-
+1 This is consistent with the discussed in the thread "Suggestion: toggle view/hide for icons, connectors, links" https://sourceforge.net/p/freeplane/discussion/758437/thread/5b2daa38/ and with the feature request homonymous: https://sourceforge.net/p/freeplane/featurerequests/2364/
-
+1 This is consistent with the discussed in the thread "Suggestion: toggle view/hide for icons, connectors, links" https://sourceforge.net/p/freeplane/discussion/758437/thread/5b2daa38/
-
Adding to the request, it would be great if once resized, "icon from table" window size be kept through different sessions. Just when opened, the icons are vey tiny in the window, so I often increase the window size as showed in this snapshot - http://i.imgur.com/SQYKTwS.png - but every session I need to resize again. Just emphasizing the icon window resize kept through sessions is secondary, although welcomed, in relation to the initial request "Floating "icon from table" window; still open after...
-
Hey guys. I formalized a feature request ticket for "Toggle view/hide for icons, connectors, links": https://sourceforge.net/p/freeplane/featurerequests/2364/ And another ticket for "batch remove connectors and links": https://sourceforge.net/p/freeplane/featurerequests/2365/ Feel free to keep discussing the thread and to add a plus to the opened tickets! Cheers
-
Batch remove/delete connectors and links
-
Toggle view/hide for icons, connectors, links
-
+1 "spotlight" colors +1 I would also suggest to allow setting the transparency of the shade. Overall I'd like to set spotlike transparency a bit darker, allowing to see less what is out of the spotlight (keep the suspense to the audience!).
-
+1
-
+1
-
I also think it would be better as an option.
-
Hi, I just added a couple of suggestion that impacts aesthetics and functionality of maps, what also impacts on presentations. If the suggestions interests you, please discuss them through the links: Toggle view/hide for icons, connectors, links: https://sourceforge.net/p/freeplane/discussion/758437/thread/5b2daa38/ Positioning "links" icons on the node right side: https://sourceforge.net/p/freeplane/discussion/758437/thread/7002805d/ Cheers! Carlos_Cadu
-
Hi, Considering all Freeplane types of icons are inserted on the node left side (overall icons from toolbar, notes, attributes, links), depending of the amount of elements used the left side becomes overloaded. Then this suggestion is to position the "links" (internals and externals) on the node right side, as showed in this snapshot: http://i.imgur.com/YzfZYYh.png Links on the right will match the default side of Freeplane connectors, what sounds consistent. Also, the position of links on the right...
-
Hi, For many Freeplane items you can already toggle view/hide: - notes and attributes icons - notes and attributes content - node detail content Having in mind overall Freeplane usage, but also presenting the map to an audience, including through the new Freeplane presentation mode (v1.6), other items would also benefit from toggle view/hide, as described below and showed in this snapshot: http://i.imgur.com/ZNIaK6n.png a) icons from "icons tool bar": in 90% of my maps they are exclusively for my...
-
Hi, For many Freeplane items you can already toggle view/hide: notes and attributes icons notes and attributes content * node detail content Having in mind overall Freeplane usage, but also presenting the map to an audience, including through the new Freeplane presentation mode (v1.6), other items would also benefit from toggle view/hide, as described below and showed in this snapshot: http://i.imgur.com/ZNIaK6n.png a) icons from "icons tool bar": in 90% of my maps they are exclusively for my internal...
-
Hy Dimitry. Just tested 1.6.1_20 and the "big sized" filter menus are great. Many thanks for implementing the feature!
-
Hi Dimitry, I just created a bug report: https://sourceforge.net/p/freeplane/bugs/2495/ I've attached a map to illustrate the problem and in the following link there is a screen-recording about that: https://goo.gl/Veklk0 If you need more information, please let me know. Thanks for help! Carlos
-
Hi DimitrY, I just created a bug report: https://sourceforge.net/p/freeplane/bugs/2495/ I've attached a map to illustrate the problem and in the following link there is a screen-recording about that: https://goo.gl/Veklk0 If you need more information, please let me know. Thanks for help! Carlos
-
Automatic "breaking" node text to next line, but plenty of room to fit more words.
-
I think it has something to do with resizing the node width. But if so, there is something else involved too, which I haven't figured out. I've wondered if it is a redraw issue after widening the node. I think the same as causing the problem.
-
Hi, I would appreciate help. As showed in this snapshot http://i.imgur.com/6NZhNkQ.png, why is Freplane v1.6.19 "breaking" node text to next line since there is plenty of room to fit more words in same line? The text in edit node dialog is a single sentence (no line breaks) and I also pasted same text as plain text in new node but the issue is always happening. Is there any format tweak that would allow better fitting of the words in node text? Thanks, Carlos_
-
+1 I agree with Ken -- I think the export should look as close to what the presentation...
-
Hi, As showed here http://i.imgur.com/MU04wcH.png , I suggest that drop-down menus...
-
Hi, As showed here (http://i.imgur.com/MU04wcH.png), I suggest that drop-down menus...
-
Hi, I'd appreciate help. Considering Freeplane defaults for export to .doc or .odt,...
-
I just tried the PDF/SVG export too and there is indeed issue with icons, as showed...
1 >