Bob Rion

Martin - Hope your Holidays were good. Any thoughts on when you could look at this again ? Kind Regards,

Martin Yes as you suspected it fails after reboot with the -87 error - Any idean when you could take a look at required changes ? Let me know if I can help in any way - your program is great for what I need and miss it daily. Kind Regards,

Martin - good news the noidmatch option appears to work - I have done minimal testing. primary4 setup is 4 monitors, 2 native displayport, 2 USB->DVI tredmill setup is 2 monitors USB3-Displayport I have captured the debug when loading each one for your review. I will do more testing but it appears basic switching back and forth works. I will check for the after reeboot / dock / undock scenarios

Martin Thanks for the special verison - I will test it out when I am back in the office later this week. I did do a bit of expermentation based on your guidance regarding the USB senario - I have a home setup where one display is DisplayPort driven natively off the laptop DisplayPort and another DisplayPort monitor off of a USB3 --> DisplayPort adapter. In this configuration I was able to save and load a configuration file in v7 without problems. I did a debug load just so you could see if interested....

Martin Yes I have 2 monitors attached to Native Display Port and 4 Monitors with USB Display Link adapters. This worked flawlesssly under Windows 7. Anything I can do to help with a fix ? Kind Regards, BER

Martin - sorry for the delay It fails on all launches, even after just creating a new profile and then trying to immediatley reload it. Attached is the xml

Windows 10 will not load profile. I have looked at the other posts regarding the issue and the Error 87 thread and not avail. I am using the latest version posted ver 7.00, same error as previous verion 6 gave. I have deleted the profiles, recreated and problem and errors do not change. The debug log is attached Let me know how I can help determine what the issue is, I have used the program for years using Windows 7 on the same machine without issues. Kind Regards, Bob Rion

Windows 10 will not load profile. I have looked at the other posts regarding the issue and the Error 87 thread and not avail. I am using the latest version posted ver 7.00, same error as previous verion 6 gave. I have deleted the profiles, recreated and problem and errors do not change. The debug log is attached Let me know how I can help determine what the issue is, I have used the program for years using Windows 7 on the same machine without issues. Kind Regards, Bob Rion