Hi Daniel, Thanks, it works now! I will use the issue tracker from now on (if needed). Greetings, Auke
Hi Daniel, Thanks, it works now! I will use the issue tracker frmo now on (if needed). Greetings, Auke
Hi Daniel, It does not help. The latest version of DWSIM (v6.6.2, checked out today) using the project created in v6.4.7 still does not operate correctly. Switching off 'Skip Equilibrium Calculations in Well-Defined Material Streams' results in a very long flowsheet calculation (over 1 minute) and still incorrect results (zero flow in the vapor stream). Greetings, Auke
Additional information: The original "Seperator_test" project was created (by a colleague) in v6.4.7 of DWSIM. I stripped everything but the separator and it gave the error as indicated above. Now I created a new project from scratch (v6.6.2, Windows classic UI) and added the required objects, filename "Separator_test2.dwxml". The problem then no longer occurs. I include this second example project with this post. Still, there might be a problem however: Older projects, somehow, do not appear to...
Additional information: The original "Seperator_test" project was created (by a colleague) in v6.4.7 of DWSIM. I stripped everything but the separator and it gave the error as indicated above. Now I created a new project from scratch (v6.6.2, Windows classic UI) and added the required objects, filename "Separator_test2.dwxml". The problem then no longer occurs. I include this second example project with this post. Still, there might be a problem however: Older projects, somehow, do not appear to...
Hi Daniel, I have noticed an (apparent) issue with the separator object. In later versions of your software (v6.4.7 is still fine), under certain conditions, the separator's vapor stream flow is set to zero. There are no error messages shown, but obviously, this is incorrect. I include an example dwxml project which shows the behaviour, as well as a jpeg indicating the contents of the 'Feed to membrane' stream. Can you have a look at this? Thanks and greetings, Auke
Hi Daniel, I have noticed an (apparent) issue with the separator object. In later versions of your software (v6.4.7 is still fine), under certain conditions, the separator's output stream flows are set to zero. There are no error messages shown, but obviously, this is incorrect. I include an example dwxml project which shows the behaviour, as well as a jpeg indicating the contents of the 'Feed to membrane' stream. Can you have a look at this? Thanks and greetings, Auke
Hi Daniel, This works exactly as I intended. Thanks!!! Greetings, Auke