Best Structural Engineering Software with a Free Trial - Page 2

By performing structural analyses on fully featured CAD assemblies within minutes, SimSolid is the game-changing simulation technology for designers, engineers, and analysts. It eliminates geometry preparation and meshing: the two most time-consuming, expertise-extensive and error-prone tasks performed in a conventional structural simulation. Multiple design scenarios can be simulated quickly under real-life conditions. Early CAD models, in any common format, can be used. SimSolid tolerance of imprecise geometry means that, unlike CAD-embedded simulation tools, there is no need to simplify complex geometries before analyzing designs. SimSolid supports all typical connections (bolt/nut, bonded, welds, rivets, sliding) and analysis of linear static, modal, thermal properties, along with more complex coupled, nonlinear, transient dynamic effects.

VABS is a popular general-purpose cross-sectional analysis tool for quickly and easily computing beam properties and recovering 3D fields of composite beams, including helicopter and wind turbine blades. It is the only tool capable of rigorously decoupling an original 3D slender solid with complex microstructure into a simple engineering beam model. AnalySwift’s roots are in the aerospace industry, where its tools have been used for composite beams (helicopter rotor blades, propellers, high aspect ratio wings, wing section design), plates/shells, and 3D structures. Used for several years in the wind turbine industry, VABS delivers rapid, rigorous results when modeling wind turbine blades. SwiftComp provides additional solutions for plates/shells, and 3D structures manufactured from composites. As the automobile industry adopts a higher use of composites, opportunities increase to leverage SwiftComp and VABS to model a wide variety of structures, including beams, plates, shells, etc.

e-Xstream engineering develops and commercializes the Digimat suite of software, a state-of-the-art multi-scale material modeling technology that speeds up the development process for composite materials and structures. Digimat is a core technology of 10xICME Solution and is used to perform detailed analyses of materials on the microscopic level and to derive micromechanical material models suited for multi-scale coupling of the micro- and macroscopic level. Digimat material models provide the means to combine processing simulation with structural FEA. This means to move towards more predictive simulation by taking into account the influence of processing conditions on the performance of the finally produced part. As an efficient and predictive tool Digimat helps its users to design and manufacture innovative composite materials and parts with great efficiency in time and costs.

FloCAD® is a fluid dynamics software add-on module for Thermal Desktop®, together they provide a complete thermohydraulic software tool for fully integrated fluid flow and heat transfer analysis. With FloCAD, the mechanics of building fluid flow models is very similar to that of building thermal models, with many of the commands applicable to both types of models. FloCAD models can be free-form (non-geometric), sketchpad style flow network modeling for abstraction and simplification, or they can be geometry-based by including objects such as pipe centerlines and cross-sections, complexly shaped vessels, or convection to finite difference of finite element representations of thermal structures. As a generalized pipe flow software tool, FloCAD captures the pressure drops in a piping network due to bends, valves, tees, changes in flow area, etc.

SDC Verifier is an all-in-one software solution for structural design, FEA analysis, and verification according to design codes and standards. SDC Verifier can be used independently or as an extension to Ansys Mechanical, Femap, and Simcenter 3D.

Hilti PROFIS Engineering Suite is a user-friendly, cloud-based software that makes designing structural connections faster and easier in construction projects with time saving productivity features. Design connections for multiple base materials and applications. Design anchors in multiple base materials such as concrete, masonry, and concrete over metal. Not just for anchors, PROFIS Engineering designs post-installed rebar, base plates, and diaphragm shear fasteners for metal deck attachments. Help save time with productivity features such as Smart Design anchor layout, import loads, running multiple load combinations and developing design templates. New to PROFIS Engineering? Sign up for a free 30-day trial of the premium version or try the free standard version.

Vertex BD is a BIM software for medium to large sized residential builders. Architectural and structural drawing sets, fabrication drawings, material reports, manufacturing data, and marketing renderings are generated all from one building model. Vertex BD automates the process of generating lot specific drawing sets, saving production home builders countless hours of having to recreate drawings for each customer's choice of house options. Vertex BD is primarily used as panel prefab software by component manufacturers and panelizers to automate the process of generating wall and floor panel fabrication drawings, structural layouts, cut lists, and other material reports. By automating these processes, manufacturers are saving a considerable amount of design, drafting and estimation time while minimizing errors at the construction site. Available for wood and cold-formed steel construction.

SCIA Engineer is an integrated, multi-material structural analysis software and design tool for all kinds of structures. Its wide range of functionality makes it the ideal partner for the design of office buildings, industrial plants, bridges or any other project, all within the same easy-to-use environment. Powerful CAD-like modeling, advanced types of calculation, code-compliant multi-material design and customizable reports. Typical situations can be automated with built-in or user-defined parametric templates for various geometries and powerful load generation tools. SCIA Engineer provides the most comprehensive implementation of Eurocodes, including National Annexes, U.S. codes and other international standards. Seamless exchange of models with other project stakeholders, through the powerful bi-directional links with Allplan, Revit and Tekla Structures, Open BIM's IFC or third-party plug-ins.