SOLIDWORKS Simulation Alternatives

Ansys Motor-CAD is a dedicated electric machine design tool for fast multiphysics simulation across the full torque-speed operating range. Motor-CAD enables design engineers to evaluate motor topologies and concepts across the full operating range, to produce designs that are optimized for performance, efficiency and size. Motor-CAD software’s four integrated modules—EMag, Therm, Lab, Mech—enable multiphysics calculations to be performed quickly and iteratively, so users can get from concept to final design in less time. Fast calculations and streamlined data input processes leave time for Motor-CAD users to explore more motor topologies and fully assess the impact of advanced loss effects in the initial stages of an electromechanical design. The release includes powerful new features for design optimization, multi-physics analysis and system modelling for electric motors. Fast multiphysics simulation across a full torque-speed operating range.

By performing structural analyses on fully featured CAD assemblies within minutes, SimSolid is the game-changing simulation technology for designers, engineers, and analysts. It eliminates geometry preparation and meshing: the two most time-consuming, expertise-extensive and error-prone tasks performed in a conventional structural simulation. Multiple design scenarios can be simulated quickly under real-life conditions. Early CAD models, in any common format, can be used. SimSolid tolerance of imprecise geometry means that, unlike CAD-embedded simulation tools, there is no need to simplify complex geometries before analyzing designs. SimSolid supports all typical connections (bolt/nut, bonded, welds, rivets, sliding) and analysis of linear static, modal, thermal properties, along with more complex coupled, nonlinear, transient dynamic effects.

SkyCiv Structural 3D is a cloud-based Structural Analysis software that allows users to model, analyze and design complex 3D structures. It is completely online; requiring no installation to use. SkyCiv Structural 3D offers the very best in online structural analysis. It includes the following: - Powerful Analysis: Linear, P-Delta, Cables, Buckling, Plates, Frequency, RS - Integrated Design checks for steel, wood, connections, foundations, wind (AISC, NSD, AISI, EN, AS, CSA, BS plus more...)

Ansys Fluent is the industry-leading fluid simulation software known for its advanced physics modeling capabilities and industry leading accuracy. Ansys Fluent gives you more time to innovate and optimize product performance. Trust your simulation results with a software that has been extensively validated across a wide range of applications. With Ansys Fluent, you can create advanced physics models and analyze a variety of fluids phenomena—all in a customizable and intuitive space. Accelerate your design cycle with this powerful fluid simulation software. Ansys Fluent contains the best-in class physics models and can accurately and efficiently solve large , complex models. Ansys Fluent unlocks new potentials for CFD analysis. A fluid simulation software with fast pre-processing and faster solve times to help you be the fastest to break into the market. Fluent’s industry leading features enable limitless innovation, while never making a compromise on accuracy.

HyperWorks provides easy-to-learn, effective workflows that leverage domain knowledge and increase team productivity, enabling the efficient development of today’s increasingly complex and connected products. The new HyperWorks experience was created to free engineers to move from physics to physics, domain to domain, and even create reports without ever leaving their model. Create, explore and optimize designs within HyperWorks to produce robust designs that accurately model structures, mechanisms, fluids, electromagnetics, electrical, embedded software, systems design, and manufacturing processes. The solution-specific workflows enhance a growing number of engineering processes including fatigue analysis, concept design optimization, CFD modeling, and design exploration. Each provides a meticulously designed and intuitive user interface, differentiated for each user profile while remaining consistent and easy to learn.

CAD-embedded finite element analysis software. Use a wider variety of study types and materials in your analysis. Inventor® Nastran® delivers finite element analysis (FEA) tools for engineers and analysts. Simulation covers multiple analysis types, such as linear and nonlinear stress, dynamics, and heat transfer. Inventor Nastran is available only in the Product Design & Manufacturing Collection. The Product Design & Manufacturing Collection delivers tools that work right inside Inventor—including advanced simulation, 5-axis CAM, and nesting, plus AutoCAD and Fusion 360.

Simulate real-world designs, devices, and processes with multiphysics software from COMSOL. General-purpose simulation software based on advanced numerical methods. Fully coupled multiphysics and single-physics modeling capabilities. Complete modeling workflow, from geometry to postprocessing. User-friendly tools for building and deploying simulation apps. The COMSOL Multiphysics® software brings a user interface and experience that is always the same, regardless of engineering application and physics phenomena. Add-on modules provide specialized functionality for electromagnetics, structural mechanics, acoustics, fluid flow, heat transfer, and chemical engineering. Choose from a list of LiveLink™ products to interface directly with CAD and other third-party software. Deploy simulation applications with COMSOL Compiler™ and COMSOL Server™. Create physics-based models and simulation applications with this software platform.

Ansys Mechanical is a best-in-class finite element solver with structural, thermal, acoustics, transient and nonlinear capabilities to improve your modeling. Ansys Mechanical enables you to solve complex structural engineering problems and make better, faster design decisions. With the finite element analysis (FEA) solvers available in the suite, you can customize and automate solutions for your structural mechanics problems and parameterize them to analyze multiple design scenarios. Ansys Mechanical is a dynamic tool that has a complete range of analysis tools. Ansys Mechanical offers a dynamic environment with a complete range of analysis tools, from preparing geometry for analysis to connecting additional physics for even greater fidelity. The intuitive and customizable user interface enables engineers of all levels to get answers fast and with confidence. Ansys Mechanical creates an integrated platform that uses finite element analysis (FEA) for structural analysis.

MSC Nastran is a multidisciplinary structural analysis application used by engineers to perform static, dynamic, and thermal analysis across the linear and nonlinear domains, complemented with automated structural optimization and award winning embedded fatigue analysis technologies, all enabled by high performance computing. Engineers use MSC Nastran to ensure structural systems have the necessary strength, stiffness, and life to preclude failure (excess stresses, resonance, buckling, or detrimental deformations) that may compromise structural function and safety. MSC Nastran is also used to improve the economy and passenger comfort of structural designs. Optimize the performance of existing designs or develop unique product differentiators, leading to industry advantages over competitors. Remedy structural issues that may occur during a product’s service, reducing downtime and costs.

SwiftComp is a revolutionary multiscale, multiphysics composite simulation code that quickly and easily delivers the accuracy of 3D FEA at the efficiency of simple engineering models. In doing so, SwiftComp reduces barriers for engineers by enabling them to model composites as easily as metals using conventional structural elements in their FEA codes (without losing accuracy while capturing all the microstructural details). SwiftComp provides unified modeling for 1D (beams), 2D (plates/shells), or 3D structures, calculating all the effective properties. Use SwiftComp either independently for virtual testing of composites or as a plug-in to power your conventional structural tools with high-fidelity composites modeling. SwiftComp can compute the best structural model for use in macroscopic structural analysis, as well as perform dehomogenization to compute the pointwise stresses in the microstructure. SwiftComp directly interfaces with ABAQUS, ANSYS.

GT STRUDL® is structural engineering software offering a complete design solution, including 3D CAD modeling and 64-bit high-performance computation solvers into all versions. GT STRUDL includes all the tools necessary to analyze a broad range of structural engineering and finite element analysis problems, including linear and nonlinear static and dynamic analysis, and can do so accurately in a fraction of the time of most other structural design software. Structural design software helps structural engineers create safe and effective designs, while managing the complexity of many different scenarios across a range of industries, including power, civil engineering, marine and infrastructure. Quality software includes many features, such as interoperability, structural analysis, database-driven design and quality assurance - all of which are included in GT STRUDL.

Today, product simulation is often being performed by engineering groups using niche simulation tools from different vendors to simulate various design attributes. The use of multiple vendor software products creates inefficiencies and increases costs. SIMULIA delivers a scalable suite of unified analysis products that allow all users, regardless of their simulation expertise or domain focus, to collaborate and seamlessly share simulation data and approved methods without loss of information fidelity. The Abaqus Unified FEA product suite offers powerful and complete solutions for both routine and sophisticated engineering problems covering a vast spectrum of industrial applications. In the automotive industry engineering work groups are able to consider full vehicle loads, dynamic vibration, multibody systems, impact/crash, nonlinear static, thermal coupling, and acoustic-structural coupling using a common model data structure and integrated solver technology.

Optimize product designs and reduce time to market with FLOW-3D, a highly-accurate CFD software that specializes in solving transient, free-surface problems. FLOW-3D‘s complete multiphysics suite includes our state-of-the-art postprocessor, FlowSight. FLOW-3D provides a complete and versatile CFD simulation platform for engineers investigating the dynamic behavior of liquids and gas in a wide range of industrial applications and physical processes. FLOW-3D focuses on free surface and multi-phase applications, serving a broad range of industries including microfluidics, bio-medical devices, water civil infrastructure, aerospace, consumer products, additive manufacturing, inkjet printing, laser welding, automotive, offshore, energy and automotive. A uniquely powerful, multiphysics tool, FLOW-3D provides the functionality, ease-of-use and power that helps engineers advance their modeling objectives.

Simcenter Nastran is a premier finite element method (FEM) solver for computational performance, accuracy, reliability and scalability. Simcenter Nastran includes powerful solutions for linear and nonlinear structural analysis, structural dynamics, acoustics, rotor dynamics, aeroelasticity, thermal analysis, and optimization. The advantage to having all these solutions available in a single solver is that input/output file formats are the same for all solution types, which greatly simplifies modeling processes. Available as a standalone enterprise solver or as an integrated solver in Simcenter 3D, Simcenter Nastran helps manufacturers as well as engineering suppliers in aerospace, automotive, electronics, heavy machinery, medical device, and other industries for their critical engineering computing needs so they can produce safe, reliable and optimized designs within ever shorter design cycles.

SPACE GASS is a multi-purpose 3D analysis and design program for structural engineers. Its extensive range of features make it suitable for anything from beams, trusses and frames to buildings, towers, tanks, cable structures and bridges. Capabilities include a 64-bit multi-core solver, silky smooth 3D rendered graphics, plate finite elements, frame elements, cable elements, tension/compression-only elements, moving loads and links to many CAD and building management programs. Why SPACE GASS Save time, money, and get a safe and efficient design. Silky smooth graphical interface that lets you see your changes visually as you go. A fast sparse matrix solver that fully utilizes the parallel processing power of multi-core computers. A wide range of structural modeling tools, analysis options and design modules. Comprehensive video tutorials to walk you through some of the tricky stuff. Configurable for stand-alone or floating network systems.

You can design, analyze, and document structural projects, anywhere in the world, with any material using STAAD. It offers you a flexible solution to cover all your structural engineering needs from the foundation up. STAAD is a comprehensive structural finite element analysis and design application that allows users to perform analysis on any structure exposed to static, dynamic, wind, earthquake, thermal, and moving loads. STAAD comes in different variations so you can choose what’s best for you. STAAD is a popular structural analysis application known for analysis, diverse applications of use, interoperability, and time-saving capabilities. STAAD helps structural engineers perform 3D structural analysis and design for both steel and concrete structures. A physical model created in the structural design software can be transformed into an analytical model for structural analysis. Many design code standards are incorporated into STAAD.

nCode DesignLife is an up-front design tool that identifies critical locations and calculates realistic fatigue lives from leading finite element (FE) results for both metals and composites. Design engineers can go beyond performing simplified stress analysis and avoid under- or over-designing products by simulating actual loading conditions to avoid costly design changes. Product options containing functions for virtual shaker testing, fatigue of welds, vibration fatigue, crack growth detection, fatigue of composites, thermo-mechanical fatigue analysis. Advanced technology for multiaxial, welds, short-fibre composite, vibration, crack growth, thermo-mechanical fatigue. Intuitive, graphical interface for performing fatigue analysis from leading FEA results data, including ANSYS, Nastran, Abaqus, Altair OptiStruct, LS-Dyna and others. Multi-threaded and distributed processing capabilities for processing large finite element models and complete usage schedules.

Ansys Sherlock is the only reliability physics-based electronics design tool that provides fast and accurate life predictions for electronic hardware at the component, board and system levels in early stage design. Ansys Sherlock automated design analysis provides fast and accurate life predictions for electronic hardware at the component, board and system levels in early design stages. Sherlock bypasses the ‘test-fail-fix-repeat’ cycle by empowering designers to accurately model silicon–metal layers, semiconductor packaging, printed circuit boards (PCBs) and assemblies to predict failure risks due to thermal, mechanical and manufacturing stressors--all before prototype. With embedded libraries containing over 500,000 parts, Sherlock rapidly converts electronic computer-aided design (ECAD) files into computational fluid dynamics (CFD) and finite element analysis (FEA) models. Each model contains accurate geometries, material properties and translates stress information.

Thousands of professionals leverage VisualAnalysis (VA) to meet deadlines. Customers say it is "a great value" and "so easy to learn". You need practical tools; easy on your budget. 3D models of complete buildings, tanks, towers, etc. Static and dynamic response analysis. Design code checks for steel, wood, concrete, cold-formed steel, and aluminum. Complete analysis and design features including automatic plate meshing, command window, nonlinear elements, and dynamic time history analysis. 3D static and dynamic FEA for civil, mechanical, aerospace or any other structural analysis. Optional support of building code load combinations. Easily apply loads. Distribute area loads to members. Gravity and lateral loading in the same project. Create frame, truss, or FEA models of just about any structure. Sketch, generate, and import CAD, or BIM (Revit). Fast static, P-delta, AISC Direct, dynamic, and nonlinear. Proven and validated results.

VSim is the Multiphysics Simulation Software used by design engineers and research scientists who require precise solutions for challenging problems. VSim’s unique combination of Finite-Difference Time-Domain (FDTD), Particle-in-Cell (PIC), and Charged Fluid (Finite Volume) methods deliver accurate results for a variety of situations, including plasma modeling. As a parallel software application, VSim can efficiently handle problems at scale, and simulations run quickly using algorithms designed for high-performance computing systems. Trusted by researchers in 30 countries, and used by engineers in industries from aerospace to semiconductor manufacturing, With documented accuracy, VSim provides results that users can trust. Created by a team of computational scientists, Tech-X’s code has been cited thousands of times in the scientific literature, and VSim can be found at many of the world’s top research institutions.

Applied early in the product development lifecycle, Inspire accelerates the creation, optimization, and study of innovative, structurally efficient parts and assemblies through collaboration. Inspire's award winning user experience for geometry creation and modification can be learned in just a few hours, and delivers dependable Altair solver power. Structural analysis with the speed and accuracy of Altair® SimSolid®, as independently validated by NAFEMS, provides the ability to analyze large assemblies and complex parts. Dynamic motion simulation, including loads extraction, using the reliable multi-body systems analysis of Altair® MotionSolve®. The industry standard for structural efficiency, topology optimization by Altair® OptiStruct®, for the generative design of practical, viable, and manufacturable geometry. Inspire enables both simulation analysts and designers to perform what-if studies faster, easier, and above all earlier, encouraging collaboration.

With S-FRAME, users can model, analyze, and design any structure regardless of its geometric complexity, material type, loading conditions, nonlinear effects, or design code requirements. S-FRAME’s automated framework generators build models quickly and import models with BIM and DXF import links, and users can maximize productivity with integrated concrete and steel design tools for design, optimization, code compliance, and report generation. With S-FRAME, users can quickly define structures using modeling automation to generate regular framework structures, and standard or custom trusses, and use clone tools to replicate all or part of the model. Additionally, users can save modeling time by importing existing BIM and DXF models. S-FRAME’s advanced meshing tools create the finite element mesh, giving users the power to generate detailed analysis results in their specific areas of interest. Users can explore those areas of interest by easily converting members to multi-shell models.

FEATool Multiphysics - "Physics Simulation Made Easy" - a fully integrated physics, CAE, and PDE simulation toolbox

Accelerate engineering with the industry's only intuitive, comprehensive CFD platform for multidisciplinary design and optimization. Computational fluid dynamics (CFD) is an aspect of multiphysics system analysis that simulates the behavior of fluids and their thermodynamic properties using numerical models. Engineers use the Cadence Fidelity CFD platform design processes, such as propulsion, aerodynamics, hydrodynamics, and combustion, to improve and increase the efficiency of products by reducing time-consuming and expensive physical testing. Fidelity CFD platform provides an easy-to-use end-to-end CFD solution for multidisciplinary design and optimization, in applications such as aerospace, automotive, turbomachinery, and marine industries. The platform, with its streamlined workflows, massively parallel architecture, and state-of-the-art solver technology, provides unprecedented performance and accuracy and increases engineering efficiency for today’s design challenges.

Simcenter Femap is an advanced simulation application for creating, editing, and inspecting finite element models of complex products or systems. You can use advanced workflows in Simcenter Femap to model components, assemblies, or systems, to then determine a model’s behavioral response when subjected to real-world conditions. In addition, Simcenter Femap provides powerful data-driven and graphical results visualization and evaluation, which in combination with the industry-leading Simcenter Nastran, delivers a comprehensive CAE solution that improves product performance. In the quest to make products lighter yet stronger, manufacturers are increasing their use of composite materials. Simcenter is at the leading edge of composites analysis through continuous development of material models and element types. Simcenter speeds the entire process for simulating laminate composite materials through a seamless connection to composites design.

NVIDIA Modulus is a neural network framework that blends the power of physics in the form of governing partial differential equations (PDEs) with data to build high-fidelity, parameterized surrogate models with near-real-time latency. Whether you’re looking to get started with AI-driven physics problems or designing digital twin models for complex non-linear, multi-physics systems, NVIDIA Modulus can support your work. Offers building blocks for developing physics machine learning surrogate models that combine both physics and data. The framework is generalizable to different domains and use cases—from engineering simulations to life sciences and from forward simulations to inverse/data assimilation problems. Provides parameterized system representation that solves for multiple scenarios in near real time, letting you train once offline to infer in real time repeatedly.

SimScale is a cloud-based web application that plays a key part in simulation software for many kinds of industries. The platform allows the use of Computational Fluid Dynamics (CFD), Finite Element Analysis (FEA), and Thermal Simulation. It also offers 3D simulation, continuous modeling, and motion & dynamic modeling.

WELSIM finite element analysis software helps engineers and researchers conduct simulation studies and prototype virtual products.

Patran provides a rich set of tools that streamline the creation of analysis ready models for linear, nonlinear, explicit dynamics, thermal, and other finite element solutions. From geometry cleanup tools that make it easy for engineers to deal with gaps and slivers in CAD, to solid modeling tools that enable creation of models from scratch, Patran makes it easy for anyone to create FE models. Meshes are easily created on surfaces and solids alike using fully automated meshing routines, manual methods that provide more control, or combinations of both. Finally, loads, boundary conditions, and analysis setup for most popular FE solvers is built in, minimizing the need to edit input decks. Patran's comprehensive and industry tested capabilities ensure that your virtual prototyping efforts provide results fast so that you can evaluate product performance against requirements and optimize your designs.

Powerful and flexible preprocessor for high quality finite element meshes. Attractive cost - an order of magnitude lower than foreign counterparts. Strength calculations under static and dynamic loading. Calculation of natural frequencies and vibration modes. Calculation of critical loads and buckling modes. 2D and 3D calculations for volumetric, thin-walled and bar structures. Elastoplastic deformation according to the mises and drucker-prager models. Strength calculations for large displacements. Calculation of thermal conditions, heat loss, temperature deformations of parts and structures. Strength calculations for highly elastic materials.

samadii/em ( electromagnetic simulation software) analyzes the electromagnetic field in 3d space using the Maxwell equation and using the FEM method. samadii/em (Electromagnetics Simulation) provides a multi-physics approach and high-performance electromagnetics simulation, with Samadii you can quickly address problems from semiconductors and displays to wireless communications, etc. With samadii/em you can analyze problems in electrostatic fields, transient electromagnetics, AC electromagnetic fields, magnetostatics as well as induction electronics, including the low-frequency and high-frequency ranges.

Metariver Technology Co., Ltd. is developing innovative and creative computer-aided engineering (CAE) analysis S/W based on the latest HPC technology and S/W technology including CUDA technology. We will change the paradigm of CAE technology by applying particle-based CAE technology and high-speed computation technology using GPUs to CAE analysis software. Here is an introduction to our products. 1. Samadii-DEM (the discrete element method): works with the discrete element method and solid particles. 2. Samadii-SCIV (Statistical Contact In Vacuum): working with high vacuum system gas-flow simulation. Using Monte Carlo simulation. 3. Samadii-EM (Electromagnetics): For full-field interpretation 4. Samadii-Plasma: Plasma simulation for Analysis of ion and electron behavior in an electromagnetic field. 5. Vampire (Virtual Additive Manufacturing System): Specializes in transient heat transfer analysis. additive manufacturing and 3D printing simulation software

With CONSELF you can exploit Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to improve your products design: minimize drag and fluid dynamics losses, increase efficiency, maximize heat exchange performances, estimate pressure loads, verify material resistance, evaluate components shape deformation, calculate natural frequencies and modes, and much more. Static and dynamic simulations are available for Structural Mechanics, with both elastic and plastic materials behavior. Modal and frequency analyses can also be carried out starting from most common CAD neutral file formats.

EMWorks provides best-in-class electromagnetic simulation software for electrical and electronics design with multiphysics capabilities. The company’s products are fully and seamlessly embedded in SOLIDWORKS and Autodesk Inventor®. Applications include electromechanical and power electronics, antennas, RF and microwave components, and power and signal integrity of high-speed interconnects. EMS is an electromagnetic field simulation software for designing and optimizing electromagnetic and electromechanical devices such as transformers, electric motors, actuators, and sensors inside SOLIDWORKS® and Autodesk® Inventor®. EMWorks2D is a 2D electromagnetic simulation software for 2D planar and axis-symmetric geometries and it is completely embedded inside SOLIDWORKS. This product enables users to do quick simulations before migrating to 3D and helps in rapid product development.

Simcenter STAR-CCM+ is a multiphysics computational fluid dynamics (CFD) software for the simulation of products operating under real-world conditions. Simcenter STAR-CCM+ uniquely brings automated design exploration and optimization to the CFD simulation toolkit of every engineer. The single integrated environment includes everything from CAD, automated meshing, multiphysics CFD, sophisticated postprocessing, and design exploration. This allows engineers to efficiently explore the entire design space to make better design decisions faster. The additional insight gained by using Simcenter STAR-CCM+ to guide your design process ultimately leads to more innovative products that exceed customer expectations. Significantly improving a battery design across its whole operating range is a challenging task, and involves the simultaneous optimization of numerous parameters. Simcenter provides a complete simulation environment for the analysis and design of the electrochemical system.

Based on computational physics, Energy2D is an interactive multiphysics simulation program that models all three modes of heat transfer, conduction, convection, and radiation, and their coupling with particle dynamics. Energy2D runs quickly on most computers and eliminates the switches among preprocessors, solvers, and postprocessors typically needed to perform computational fluid dynamics simulations. It allows you to design "computational experiments" to test a scientific hypothesis or solve an engineering problem without resorting to complex mathematics. Work is also underway to incorporate other types of energy transformations and support multiple types of fluids. The conduction part of Energy2D is highly accurate, but the convection and radiation parts are not 100% accurate. Hence, in cases that involve convection and radiation, Energy2D results should be considered qualitative. More than 40 scientific papers have used Energy2D as a research tool.

With CalculiX finite element models can be built, calculated, and post-processed. The pre-and post-processor is an interactive 3D tool using the OpenGL API. The solver is able to do linear and non-linear calculations. Static, dynamic, and thermal solutions are available. Because the solver makes use of the abaqus input format it is possible to use commercial pre-processors as well. In turn the pre-processor can write mesh-related data for nastran, abaqus, ansys, code-aster, and for the free-cfd codes dolfyn, duns, ISAAC and OpenFOAM. A simple step reader is included. In addition, external CAD interfaces are available. The program is designed to run on Unix platforms like Linux and Irix computers but also on MS Windows.

Enhance your product design with simulation and analysis to reduce costly physical prototyping while increasing your products' durability, reliability, and safety. Using digital prototypes to understand how your designs perform in real-world conditions is vital to your product development process. Creo Simulation is designed uniquely for the engineer. It comes complete with structural, thermal, and vibration analysis solutions and a comprehensive set of finite elements analysis (FEA) capabilities. With Creo Simulation, you can analyze and validate the performance of your 3D virtual prototypes before you make the first part. We offer flexible and unique simulation solutions for our customers. Utilize this section to gain insights into what we offer to fit your needs. If you have any questions about our tool stack, feel free to contact a Creo representative.

FloCAD® is a fluid dynamics software add-on module for Thermal Desktop®, together they provide a complete thermohydraulic software tool for fully integrated fluid flow and heat transfer analysis. With FloCAD, the mechanics of building fluid flow models is very similar to that of building thermal models, with many of the commands applicable to both types of models. FloCAD models can be free-form (non-geometric), sketchpad style flow network modeling for abstraction and simplification, or they can be geometry-based by including objects such as pipe centerlines and cross-sections, complexly shaped vessels, or convection to finite difference of finite element representations of thermal structures. As a generalized pipe flow software tool, FloCAD captures the pressure drops in a piping network due to bends, valves, tees, changes in flow area, etc.

SolidFEA is our innovative solid finite element analysis tool, designed to make advanced structural engineering design both accessible and affordable. Powered by the Calculix engine, it offers detailed sub-model analysis with lower cost and hardware requirements than competitors like Abaqus. Ideal for complex engineering challenges, including steel connections and bridge engineering, SolidFEA democratizes specialty software with ease of use and IFC file format compatibility, complementing our GenFEA software for comprehensive structural analysis. SolidFEA marks a transformative step in structural engineering design, bridging the gap that has long existed due to the prohibitive costs, complex learning curves, and high-end computing requirements associated with solid finite element analysis (FEA). Designed for ease of use, it supports IFC file format imports, making it a seamless addition to engineering workflows.

The primary applications of AxisVM are in the design of buildings, and industrial and geotechnical structures. Due to its powerful finite element solver and practical modeling tools, it has also been used in bridge design, and in the design of composite structures, machines, and vehicles. Besides the basic configurations, optional design modules are available for structures made of reinforced concrete, steel, timber, and masonry members and connections. In addition, thanks to the special elements and analysis capabilities, users have successfully applied AxisVM to the design of innovative and custom structures. Reports can be created based on tables, drawings, and detailed design calculations with additional headings and text lines. Reports are auto-updating, i.e. generated based on the most current model data and results.

Integrated solutions are essential in times of tight schedules and scarce resources. Therefore, RIBTEC offers various synergies in calculation, design and construction. You benefit from a time-saving data flow in the sense of Building Information Modeling (BIM) in the overall process of structural design. RIB's software solutions for structural engineers range from structural, building and ground engineering as well as finite element calculations to tunnel and bridge construction and the drawing of formwork and reinforcement plans. RIB has been developing pioneering solutions for structural design and FEM since 1961. The RIBTEC programs are successfully used by over 5,000 engineering offices, inspection engineers, construction companies and planning departments in the public and industrial sectors. With more than 100 structural analysis programs, RIBTEC comprehensively covers the practice of structural design.

The FEA program RFEM allows for quick and easy modeling, structural and dynamic calculation, as well as the design of models with member, plate, wall, folded plate, shell, and solid elements. Due to the modular software concept, you can connect the main program RFEM with the corresponding add‑ons in order to meet your individual requirements. The structural analysis program RFEM 6 provides structural engineers with a 3D FEA program that meets all requirements in modern civil engineering. Efficient data input and intuitive handling facilitate the modeling of simple and complex structures. The structural analysis program RFEM is the basis of a modular software system. The basic program RFEM is used to define structures, materials, and loads for planar and spatial structural systems consisting of plates, walls, shells, and members. The program also allows you to create combined structures as well as model solid and contact elements.

Powered by the 3DEXPERIENCE® platform, SIMULIA delivers realistic simulation applications that enable users to reveal the world we live in. SIMULIA applications accelerate the process of evaluating the performance, reliability and safety of materials and products before committing to physical prototypes. Delivers powerful simulation of structures, fluids, multibody, and electromagnetics scenarios including complex assemblies directly linked with the product data. Modeling, simulation, and visualization technology are fully integrated on the 3DEXPERIENCE Platform, including process capture, publication, and re-use. The value of the customer’s existing investment in simulation horsepower is maximized by allowing simulation data, results, and IP to connect to the platform and become true corporate assets that powers innovation for all users.

Defining the state-of-the-art, DigitalClone for Additive Manufacturing (DC-AM) integrates a suite of metal additive manufacturing modeling and simulation capabilities for comprehensive design and analysis support with seamless interoperability. DC-AM implements a multiscale, multi-physics analysis approach linking the process - microstructure - fatigue relationship of additively manufactured parts to enable computational assessment of quality and performance. DC-AM promotes adoption of AM in safety-critical industries by providing unprecedented insight into the relationship between build conditions and the characteristics of the final part while enabling reduction in time and cost required to qualify parts and processes.

Ansys SPEOS predicts the illumination and optical performance of systems to save on prototyping time and costs while improving your product’s efficiency. Ansys SPEOS delivers an intuitive and comprehensive user interface, enhanced productivity with use of GPUs for simulation previews and easy access to the Ansys multiphysics ecosystem. SPEOS has been assessed by the International Commission on Illumination (CIE) against CIE 171:2006 test cases, assessing the accuracy of light modeling software and showing the performance benefits of Ansys SPEOS. Turn on the light in your virtual model and intuitively explore the propagation of light in 3D. The SPEOS Live preview function features simulation and rendering capabilities so you can design products interactively. Cut iteration time and speed up your decision-making process by performing simulations correctly the first time, automatically designing for optical surfaces, light guides and optical lenses.

Simufact Welding is a modular product line, which offers comprehensive functionality for modeling the elastic-plastic behavior of materials and structural welding simulation. The software covers different welding processes. Simufact Welding is designed for modeling and simulation of a wide range of thermal joining processes by means of structural welding simulation including usual arc and beam welding processes as well as brazing. Additionally, Simufact Welding provides possibilities to model heat treatment processes, variations of cooling and unclamping setups as well as mechanical loading of welded structures. Identify critical distortions, i.e. with respect to assembly, bulging, imbalances, and clearances. Investigate and optimize clamping tools even before an investment in tools has been made. Identify optimal welding directions and welding sequences.

Adaptive Research is pleased to announce the immediate release of the CAESIM 2024 simulation platform, providing advanced computational fluid dynamics modeling with multi-physics capabilities. The new software release provides new tools and capabilities that optimize the modeling process and provide the CFD engineer with fast simulation solutions.

In markets where the safety of welded assemblies is essential, analysis with TRANSWELD® offers a global and innovative solution to anticipate welding defects. Our simulation software integrates multi-physical models to simulate the real behavior of the metal in the liquid/mushy state to perform a complete analysis of the material evolution. TRANSWELD® also makes it possible to study the microstructure of the solid-state assembly. Then, you ensure the conformity of your welded part without going through the prototyping stage. Our software is 100% predictive. It allows you to observe your welding processes numerically by applying real conditions. For example, you can visualize the heat source movement during the simulation of laser welding or arc welding.

Ansys LS-DYNA is the industry-leading explicit simulation software used for applications like drop tests, impact and penetration, smashes and crashes, occupant safety, and more. Ansys LS-DYNA is the most used explicit simulation program in the world and is capable of simulating the response of materials to short periods of severe loading. Its many elements, contact formulations, material models and other controls can be used to simulate complex models with control over all the details of the problem. LS-DYNA delivers a diverse array of analyses with extremely fast and efficient parallelization. Engineers can tackle simulations involving material failure and look at how the failure progresses through a part or through a system. Models with large amounts of parts or surfaces interacting with each other are also easily handled, and the interactions and load passing between complex behaviors are modeled accurately.