Alternatives to IndySoft
Compare IndySoft alternatives for your business or organization using the curated list below. SourceForge ranks the best alternatives to IndySoft in 2024. Compare features, ratings, user reviews, pricing, and more from IndySoft competitors and alternatives in order to make an informed decision for your business.
-
1
Intelex
Intelex Technologies
Intelex is an integrated software solution for managing Environmental, Health, Safety and Quality (EHSQ) programs. Intelex’s scalable platform is designed to store, manage and analyze EHS and Quality data in one place. The solution works on any device to meet the realities of your workplace. With Intelex, your organization can: - Drive better results in your EHSQ program by monitoring workflows to achieve top performance and gain control. - Identify trends and tendencies by setting goals to gain greater insight into your EHSQ program to enhance judgement. - Reduce incidents and administrative work by easily monitoring, managing, optimizing and drawing insights from your safety data with our user-friendly safety software solution. - Streamline air, water and waste emissions management and reporting, and track and manage environmental outputs to achieve sustainability goals. - Drive continuous quality improvement activities across multiple departments, sites or locations. -
2
Artintech ERP
Artintech
Artintech ERP is a comprehensive enterprise resource planning solution designed to optimize and streamline your business operations across various departments. Tailored for small to medium-sized enterprises (SMEs), Artintech ERP offers robust functionality with a user-friendly interface, allowing businesses to seamlessly manage their resources, inventory, human capital, finances, and customer relations all in one integrated platform. Artintech ERP includes a wide range of modules designed to optimize business operations. Key modules include Procurement, Warehousing, CRM, Distribution, Quality Management (QMS), Workplace Safety, Document Control, Non-Conformance and Corrective and Preventive Actions (CAPA), Inspection, and Computerized Maintenance Management System (CMMS). -
3
Total Lean Management (TLM) Software
Lean & Mean Business Systems
Perfect for a small company, TLM has everything you need, and can accelerate the implementation with consulting, training, procedure templates, and document writing/coaching support, plus we have validation templates and a system setting mode so small medical device companies have special features to help manage technical files and 510K submittals. TLM QMS Software saves you money AND makes your QMS more effective by providing a dual technology landscape for the two distinct QMS user types. Core modules include: • Audits • Contact Manager (CRM) • CAPA • Customer Feedback • Document Management • Electronic Forms • Employees • Employee Feedback • Equipment Calibration • Evaluations • FMEA • Inspections • Inventory/parts • Library • Meetings/Reviews • Metrics • Projects • Purchase Orders • Quality Record Mgt • Rejected Materials • Risk & Opportunities • Sales Orders • Strategic Planning • Surveys • Tasks/Events • Training • Work OrdersStarting Price: $45/user/month -
4
LIMSey
LIMSey
LIMSey is a web-based software designed to help engineering and mechanical test labs manage their entire process within one system. Assign and schedule resources, track job progress, manage ever-changing priorities, generate custom test reports, support regulatory audits and accreditation, manage equipment, maintenance, calibrations, training records, and more. All features, updates, and support are always included with no additional modules to buy. We focus on continuous improvement and regularly meet with our existing customers to plan and discuss new features. This collaboration helps drive the development of LIMSey to solve more and more real world problems faced by test labs. Most of our new features come directly from customer requests/. We're also very familiar with ISO / IEC 17025 and would love to help with your initial accreditation or renewal. Call us today at 512-537-9323 for a demo or free trial and start managing your entire lab from one place. -
5
SBS Quality Management Software Suite
Sunday Business Systems
The SBS Quality Management Software Suite (QMS Suite) is a group of 5 software modules that work together for efficient Quality compliance. The QMS Suite can be deployed on your local server or accessed from our cloud server. Each module is designed for ease-of-use to reduce training overhead and improve overall compliance. Password controlled access and privileges ensure you may control access to critical features for each user. The SBS QMS Suite of modules: SBS Quality Database - CAPA / 8D with root cause analysis - Nonconformance management - Risk analysis (FMEA, SWOT, risk register) - Audit management SBS Ground Control - Employee training management (LMS) - Document control SBS Asset Tracking Database - Calibrated equipment - Preventive maintenance SBS Inspection Database - Data collection / SPC - Control Plans SBS Vendor Management - Approved vendor list / AVL - Supplier qualification plans Great product for efficient and affordable QMS Compliance.Starting Price: $4,268 -
6
Qualer
Qualer
Qualer is a dynamic asset and service management software designed to automate asset maintenance, service, and calibration workflows and enhance collaboration with both internal stakeholders and third-party service providers. Qualer's secure, cloud-based platform allows users to manage their assets from anywhere in the world with a simple internet connection. Customizable reporting and dashboards help you digitize your workflows and centralize documentation to prepare you for audit. Qualer is 21 CFR Part 11 validated and simplifies audit preparation by minimizing error potential and gaps in compliance strategy. -
7
[FP]-LIMS Software
Fink & Partner
The [FP]-LIMS modules are based on a powerful SQL database solution. These allow a quick query and processing of data. We guarantee maximum user-friendliness! Our job server is a central element for the automation of functions, which executes time- and event-controlled tasks. Like, to automatically monitor limit values and the associated alarm message (e-mail, message on the monitor, etc.) when they are exceeded. Using modern LIMS software and modules such as analysis management, inspection planning, workflow management, or ERP, you can design your quality management in the best way. This makes your production processes more efficient.Starting Price: $2500 one-time fee -
8
Intellect
Intellect
Intellect QMS is the latest version of Intellect's flagship product designed to help organizations and quality leaders meet FDA, ISO, and other global GxP regulatory compliance requirements. Intellect offers faster implementation time, robust out-of-the-box QMS capabilities, and extreme configurability to modify or build new apps. Empower your onsite and remote workforce with virtual auditing, online approvals, 21 CFR Part 11 electronic signatures, and ensure your team can access only approved and up-to-date quality documents, data, reports and analytics anytime, on any device. Intellect’s Environmental, health, safety and quality (EHSQ) software acts as a data management system for capturing, storing, and analyzing information related to occupational health and safety, waste management, and sustainability. It aims at reducing operational risk and improving health while attaining sustainability goals. -
9
SPC-PC IV Explorer
Quality America
SPC-PC IV Explorer is a leading Statistical Process Control (SPC) Software package for quality assurance, capability evaluations, & streamlined process data management and reporting: -Manage process data with cascading folders grouped by customer, department, product, etc. -Password-protected concurrent-use licensing controls access to features -Process Monitor charts provide dashboard view of KPI -Quickly analyze keyboard data, or data imported or linked from Excel or other ODBC sources such as SAP, ERP, or LIMS -Data entry via electronic gaging supported in optional Work Set view -Customized reports exported to Word with charts, statistics, raw data or other info as needed -Show stratification patterns using symbol shape/color, or filter data using traceability fields. -Optional Web SPC interface for reporting, data entry & process monitoring throughout your supply chain with no local installation -Optional Calibration Management, or purchase separately as QA-CalibrateStarting Price: $995.00/one-time/user -
10
Calibration Control
Ape Software
Use Calibration Control (CC) for Calibration, Maintenance, or general Asset Management. Quickly and visually track equipment that requires Calibration or Maintenance using customizable highlighted grids, auto emails, or reports. Maintain histories with audit trails relating to equipment traceability, people, companies, related documents, attachments, certificates, & more. Automate Calibration Control with custom or default barcode labels scanned by time-saver data entry dialogs to increase speed and traceability. Use the Report Designer for custom reports or modify existing reports. ISO, FDA, & ANSI quality systems use CC to maintain compliance and effortlessly communicate that compliance to auditors and internal customers. Although CC grew up in a Manufacturing environment, it is also used in other industries like Metrology Services, Health Care, Aviation/Aerospace, Mining, Testing, Maintenance, Designer Engineering, Oil Wells, Distribution, Packaging, and others.Starting Price: $768 -
11
Beamex Calibration Software
Beamex
Gain business efficiency, profitability, and growth with Beamex Calibration Software, an all-in-one solution. The Beamex Calibration Software assists users in planning, managing, analyzing and documenting all calibration work and assets safely and efficiently. With Beamex Calibration Software, there is significant reduction of both the costs of calibration and time required to calibrate. -
12
GxPReady! Suite
GxPReady.com
Relax, and see how GxPReady! Suite can help you meet your commitments without breaking the bank with our Calibration, Validation, and Maintenance modules that can operate together or independently giving you great flexibility! It is so easy to get up and running. Minimal interference with your IT systems. WIth secure web access, you can be up and validated in no time, and no big changes to your current processes with minimal data entry. We offer a suite of validated SaaS products designed to help managers of FDA-regulated companies comply with regulatory requirements including cGMPs, 21CFR11 and Annex 11 requirements. Our validated CMMS system can help you get your equipment management system up and running, on a subscription basis, with minimal upfront costs. And, our patented Flash Validation approach to qualification provides the fastest GxP compliance available. -
13
Metquay
Metquay
Track your Customer’s calibration equipment & your Calibration Standards with Barcode/QR code labels, real-time asset alerts, etc. Generate Calibration certificates and labels from raw data. Design your own calibration certificate& sticker templates and auto pick based on customer, instrument type, etc. Assign jobs to technicians based on competency. Track progress and bottlenecks via our KANBAN dashboard. Be audit-ready at all times with built-in traceability reports, audit logs, competency matrices, etc. Send Quotes, Invoices, Delivery Reports, etc to your customers. Track receivables and accept payments. Track asset health, maintain calibration history, Generate Statistical Process Control Charts, Forward and backward traceability, etc. Create and assign non-compliance reports to users for resolution. Categorize ncrs as customer complaints, internal, audit findings, etc. -
14
ProCalV5
Prime Technologies
For almost three decades, Prime Technologies has been an industry leader for calibration & maintenance management software. Thousands of companies around the globe use our programs to achieve total paperless operations. Powerful math and data verification features are designed to ensure FDA, ISO and other regulatory requirement. The program also supports off-line and automated calibrations with tablets/laptops and documenting process calibrators. For life sciences facilities, each version release is pre-validated and 21 CFR Part 11 compliant. Accounts can be segmented ad individually configured to meet single site workflow preferences use or harmonized for enterprise level deployment. APIs and technical services are available for integration to ERP, CMMS, LIMS and other applications. -
15
QC-Pro Gage Control
Pister Group
Scheduling gage calibrations or verifications. Maintaining historical records of all activities. Measurement System Analysis (GRR, Stability, Bias, Linearity, Attribute Crosstab). Some of the key elements are record before/after readings across the operating range of the gage. Gage calibration schedule can be based on time interval or gage usage. Link external documents (e.g. calibration certificate) to a calibration record. Calibration procedure - free format steps to calibrate gage. Custom fields that are user defined. Data Security - option to restrict edits to existing calibration records. Audit Trail - maintains history of calibration record content prior to an edit. Reschedule gage calibration due dates that fall on holidays, weekends etc. Flexible report filtering (overdue, date range, gage id, location etc.) -
16
An application for both fixed and mobile devices, through wireless communication protocol. iOS, Android, and Windows and OS X store ready, Login and begin to work. Provides edge data, supply chain intelligence, and analytics in both disconnected and connected environments. Workflow configurable and easy integration with TegoHub and enterprise applications. Provides enterprise-wide visibility in the cloud for rapid deployment. No coding is required, simple drag-and-drop wizard interface for process definition. Configurable workflow, asset types, and industry data standards provide the most up-to-date data on a product’s lifecycle and business processes. Widgets, dashboards are fully scalable and customizable. Ability to support diverse multimedia file types such as images, documentation, spreadsheets and other types of files or unstructured data. Low-power/no-power technology, suitable for disconnected, rugged, and/or mobile assets.
-
17
MOX
MOX
The CMS Module of MOX delivers comprehensive, enterprise-level tools for managing M&TE and laboratory workflow. CMS is the ideal solution for managing calibration operations for any size organization looking for flexibility and state of the art features. The MPS Module of MOX offers state-of-the-art capabilities for designing, automating and executing calibrations. MPS delivers advanced uncertainty modeling capabilities and cutting-edge metrology engineering solutions that put MPS light years ahead of any software available today. The IMS Module of MOX is a web-based enterprise solution for tracking and maintaining M&TE and other tool inventories. An intuitive interface and easy to use features allow your organization to quickly track asset status, location, usage, transaction history and on-hand availability. -
18
MSA Pro
Omnex Systems
Flaws in measurement equipment pose a significant risk to your Organization. In addition, ISO 9001:2015 and IATF 16949:2016 require equipment measurement uncertainty to be studied. Omnex’s Measurement System Analysis platform (MSA Pro) is designed exclusively to help organizations identify, catalog, calibrate, and study the measurement system variation and uncertainty of Inspection, testing, and lab equipment. This is a complete solution for gage management, to perform MSA studies which include – bias, calibration & verification, Gage R & R, and lastly stability studies for variable and attribute gages. Using MSA Pro ensures your measurement systems produce accurate, repeatable, and stable measurements. Manage your gages and perform all MSA Studies – Bias, Calibration & Verification, GR&R, and Stability Studies for Variable and Attribute gages. Track gage Variability and Attribute Repeatability & Reproducibility, including Annova and Kappa studies. -
19
4Sight2
Druck, a Baker Hughes company
4Sight2 from Druck, a Baker Hughes business, offers easy-to-use, cost effective and scalable calibration management that is equally effective for single use or global multi-site operations. This configurable software is designed to empower your organization to operate simply and securely, connecting your people to instruments, data and enhanced analytics. Purpose-built with available custom installation support, 4Sight2 is designed to deliver actionable intelligence and transformative insights. Developed in-house, the custom software package enhances the visibility of your assets and data, helping you plan your resources to support effective maintenance, process efficiency and regulatory compliance. -
20
Caliso Calibration Toolbox ADO
Humpage Technology
Our online text chat service enables you to contact us in real-time. We will be pleased to discuss all aspects of our software with you. All the features you'd expect from the world's leading calibration management software. Perhaps the world's most advanced software for the automation of temperature calibrations in primary, secondary and industrial laboratories. An entry-level calibration management system, powerful but easy to use. Calibration Toolbox ADO is a complete, fully networkable, calibration management solution. Our ISO17025 compliant Calibration Toolbox ADO Windows application. The Web Portal for viewing data and downloading calibration certificates through browsers such as Firefox and Chrome etc. At least one single-user license for Calibration Toolbox ADO (either JET/Access or SQL Server), in order to maintain your database and generate certificates etc. -
21
Caliber v18
Dhruthi Technologies
Caliber v18 Improves the performance and effectiveness of your company’s gauge system by capturing and effortlessly generating Dues, status and trending analysis. Protects the company’s investment in measuring devices through disciplined tracking and proper maintenance. Saves time through quick look up and entry of multiple gages with minimal data entry. Reduces session time with efficient, user-friendly gage calibration software system. Ensures all quality requirements (ISO 9001; ISO13485; ISO 14001, ISO 17025, TS 16949; AS 9100; 21 CFR Part 11 and many more) are met or exceeded.Starting Price: $1000 one-time payment -
22
DataLyzer Gage Management
DataLyzer International
DataLyzer Gage management software is 40 years on the market and is a complete webbased solution for registration and calibration of gages and Measurement System Analysis (MSA) studies. It is fully integrated in our quality suite with FMEA, SPC and OEE Features include: - Management of gages and suppliers - Internal and external calibration studies - Printing of calibration stickers. - Bias, linearity, type1,2 and 3 gage R&R studies and Kappa studies according to TS16949 or RM13003 - Planning and reports related to calibration and MSA studiesStarting Price: $1295 one-time payment -
23
AutoCal
Tradinco
Timely and accurately executed calibrations are vital for the continuity of your business. From this point of view we have developed the AutoCal software. With our Autocal calibration software you can plan and perform high-quality measurements and calibrations. The software has been developed in line with international metrology and quality standards. The AutoCal software is also brand independent, which means that the software works with solutions supplied by us as well as with solutions from other brands. The AutoCal software works effortlessly with field- as well as laboratory instruments and because of its multiple functionalities it saves you time and money. You can save, manage and plan calibrations since you can use the database to quickly and safely up- and download data. By using AutoCal, you are optimizing workflows. Worldwide organizations have been working with AutoCal because of its straightforward operation.Starting Price: €39.50 per month -
24
GageList
GageList
UNLIMITED USERS on all accounts (including free). Free MULTI-SITE control panel. Free companion MOBILE APP for iOS and Android. Public API for integration with your enterprise applications. Trusted by major global industries, GageList supports compliance with ISO 9001, ISO 14001, ISO 17025, API Q1, AS 9100 and other standards. It's web-based so your unlimited users can access it anywhere, any time, on any device, and it's scalable to meet the needs of any organization. Nothing to install, and it's easy to learn and use. We also offer migration concierge service to help you migrate from your legacy system. GageList is FREE for up to 25 tools, and offers economical plans for every size of organization.Starting Price: Free -
25
MET/CAL
Fluke
MET/CAL® Plus Calibration Management Software is the complete solution for automating calibration processes plus managing and reporting measurement assets. MET/CAL Plus includes two applications: MET/CAL software, the industry leader for automated calibration; and MET/TEAM Express or the more fully featured MET/TEAM software for test and measurement asset management. Using MET/CAL software can help you cut calibration time in half by fully automating your electrical and RF calibration workload and more. Documented procedures and calibration results, plus reports, help you to comply with quality standards like ISO 9000, ANSI Z540 and ISO/IEC 17025. -
26
Nova-CPM
Novatek International
Novatek International offers comprehensive software solutions that meets and exceeds the quality and compliance requirements for the life science industry. The process-specific offerings are an integrated platform that provides consistency and standardization across multiple departments within a site, and across multiple sites. This greatly reduces the total cost of ownership and results in a higher ROI. NOVA-CPM is a state-of-the-art automation tool that provides full management of your equipment qualification, calibration, and maintenance processes. The system is designed to ensure global regulatory compliance and data integrity, with security and electronic signature and audit trails. NOVA-CPM is the leading Computerized Maintenance Management System (CMMS) solution that provides functionality for the full life cycle of equipment, from purchase and validation, calibration and maintenance operations, repairs, and end-of-life replacement. -
27
Calibrate
Ambrit
High integrity measurement and control systems need to be carefully calibrated to ensure each instrument is working within its operational limits. Calibrate™ manages the whole calibration process and provides certification that can be easily accessed and audited. Gone are the days of storing calibrations in many separate spreadsheets scattered over several different machines. Calibrate™ is an online metering calibration management system that is designed to streamline the calibration process in one centrally managed database that maintains an auditable trail of all calibrations that have been performed. One or more calibrations can be defined for every piece of equipment in the database using templates from Calibrate™’s extensive library of available metering calculations. These templates dynamically adjust to reflect the type of form required as options and other parameters are defined. -
28
InstaCalPro
V-Soft Computers
It tracks Daily Inward, Calibration Record sheets, Calibration Certificates, Invoicing, Bills Received, Measurement Uncertainty (MU) Calculation. ICPro delivers various benefits to organizations by delivering information about various lab reports like pending calibration equipments, bills collection, due payments, service tax details, calibration history, calibration due, delivery performance etc. InstaCalPro is powerful gauge management software that helps you manage a complete history of your measurement devices, instruments, and gauges. It generates calibration schedules and alerts you to failed and past due calibrations. Rapidly confirm if you possess a particular Size or Type of gauge. -
29
Calspex 5.2
nemcal
The Vantek Calibration Control Software provides a complete calibration and gage tracking system for all types of gages and equipment. It facilitates the writing of calibration reports and the organization of important data. Calspex is a procedure-based calibration and data entry program. It guides you through the calibration process, during which you only enter the required information when prompted. The calibration report generated is concise and informative. Reports are saved to a local drive or network drive for quick accessibility. Printing hardcopies is optional. The integrated Thread Calculator can be used when calibrating threaded plugs and threaded rings to quickly and accurately calculate all thread dimensions. Simply provide the software with the thread form, nominal diameter, and pitch; the software will calculate your master dimensions for that thread. The calculator accommodates non-standard thread wire sizes, special threads, and custom length of engagement -
30
Calibration Studio
Virtuz Technology
Calibration Studio offers key benefits over the manual method of Calibration. Calibration Studio has a work flow-based approach to calibration and inspection. Master management, Instrument management, Receive Instrument, Inspect Instrument, Generate Certificate are the key functionalities. Type A and Type B uncertainty calculations and certificate display and printing are functions finally carried out. The Auditor can view the measurement results, uncertainty values and other certificate information based on which he/she can accept or reject the instrument under inspection. Rejected instruments are sent back for recalibration or repairs. The accepted ones are issued to the related department for future use. The Meta data configuration functionality provides administrators to configure Customer Information, Units, Master Category, Instrument Category/sub category, Measurement methodology, and Certificate fields/notes/remarks.Starting Price: $210 one-time payment -
31
xTrak
usCalibration
A one-stop shop. You won’t need to utilize several calibration vendors. Calibration, Repair, and New Equipment Sales to manage asset life cycle. Most onsite calibration capabilities in Southern California. Nobody beats us. Certificates are created by technicians on the spot. No waiting for certificates. Expert, quality service in the calibration of all major equipment types. Focus on Customer Service: You will always get quick responses from us. Weekly pick up delivery is offered for Southern California. Use our Cloud Calibration Management xTrak on a tablet or PC. 6 consecutive years of zero deficiencies in A2LA ISO Audits. Serving Aerospace, Medical, Automotive, Electronic, Energy sectors since 1997. xTrak® is a cloud-based calibration management system. Calibration records and statuses are automatically updated after each service. Reduce the time needed to manage calibration so that you can focus on your core business. -
32
CERDAAC
SIMCO Electronics
Regulated manufacturers are dually challenged with meeting stringent quality requirements while delivering profitable products. CERDAAC solutions automate and coordinate calibration, maintenance, validation, onboarding, and other processes that surround production to ensure compliance, reduce cost and minimize downtime. CERDAAC offers a broad range of highly configurable solutions to your most important operations, quality and compliance challenges. Manage all your in-house and outsourced calibrations, verifications, repairs. Automate service scheduling and notifications to ensure on-time compliance. Go paperless with electronic certificates and FDA-compliant digital signatures. Store all related asset information and service history in one place. -
33
RevvADAS
Revv
RevvADAS automates ADAS research in seconds, allowing shops to easily identify and perform calibrations for substantial profits. Empower your business with detailed reports on ADAS, Steering, Safety, and Functional operations. Generate more revenue, save precious time, and protect your liability with RevvADAS. Our platform swiftly decodes VINs to detail equipped and optional ADAS features using industry-leading as-built data. It identifies ADAS calibrations, safety, and functional procedures following OEM-specific instructions for accuracy. The system provides prompts for optional sensors, and detailed procedure types for insurance-grade invoicing and assists with alignment checks, tools, requirements, and more. From year 2000 models to the present day, our platform has got you covered. We support an extensive range of popular makes and models. -
34
MicroNet
Microrep
Measuring instruments for gage calibration laboratories and mechanical industry. Gage and Instrument inspection is an important factor for the accreditation of quality systems to ISO 9001, IATF 16949, and ISO 17025. Our product range is capable of inspecting solid (hard) gages such as a plain plug, thread plug, plain and thread ring, pipe thread, snap gage, indicator, electronic probe, lever type indicator, micrometer, bore gage as well as temperature, humidity, and angles. For the inspection of hard-solid gage, reference gage, master and different gages including plug gage, ring gage, thread plug gage, thread ring gage, gage block, snap gage, pipe thread gage, spline gage, external micrometer, internal micrometer, dial indicator and electronic probe. -
35
Asset Controller
PCP Software Solutions Ltd
Calibration Management, Asset Management, Workload Management, Project Management & More! 14 Day Free Trial. No Credit Card Needed. Free Updates. UK Based Company. Understanding your requirements and objectives is important to us. Unlike other systems, Asset Controller is highly configurable, so it can become whatever you need it to be, and adjust as your needs change. With intuitive controls and lots of features, managing your assets has never been so easy. Asset Controller provides data redundancy and incremental backups ensuring your data is fully protected. Not having to worry about managing expensive storage systems and backups allows your business to focus on what is important. Asset Controller is designed to help your team achieve their goals together. It allows them to collaborate on assets with updates, notes and photos allowing all users to be kept updated. Asset Controller can accurately maintain and keep your stock right.Starting Price: £39 per month -
36
GAGEpack
PQ Systems
GAGEpack by PQ Systems is a powerful gage calibration software for manufacturing companies of all sizes and industries. GAGEpack helps companies stay organized by offering an easy way for maintaining gage inventory, tracking calibrations, creating and completing measurement systems analysis (MSA), maintaining certificates of calibrations, and more in one place. Users also get access to GAGEpack's powerful dashboard that provides summary information about gage inventory, historical events, and projected workload to enable better decision making. -
37
GageManager
ALTEGRA
GageManager is a fully-featured calibration management software from Altegra. With GageManager, service and repair facilities can ensure a fast, correct, and audit-compliant tracking and calibration of their equipment. GageManager's functionality covers inventory management, calibration scheduling, and measurement system analysis (MSA). It also comes with a dashboard-based screen design, giving users easy access to calibration status information. Our products include software for gage calibration management, at-machine job execution guidance, real-time predictive statistical process control, statistical quality control, and production decision support. Since 1999 our products have been helping manufacturing, industrial, and technical services companies increase productivity and profitability by avoiding unplanned downtime, reducing defects, and preventing equipment malfunction.Starting Price: $298 one-time payment -
38
EnGagePlus!
DATAMYTE
Maintain all gage information electronically, including gage history and calibration records. Intuitive functionality includes colorful graphics, menus, and a floating tool bar for instant access to major functions. EngagePlus! has built‐in capability to perform a variety of gage studies, including Gage R&R, bias, stability, and linearity. The user has the option of performing either standard or ANOVA R&R studies. EnGagePlus! automatically maintains all study events as part of each gage history, and is compliant with the MSA 3rd Edition Gage R&R and ANOVA analyses. -
39
HGI Calibration Recall
Harrington Group International
HGI's Calibration Tracking software (Calibration Recall) program allows you to take control of the equipment maintenance process by helping to reduce downtime, and maintain equipment history, while sequentially assessing a tool’s continuing usability in production. Calibration is the comparison of measured values delivered by a device under test with those from an agreed-upon standard of known accuracy. Calibrations can be used for many different purposes, such as ensuring consistency in product measurements across time and space, or by validating new measuring techniques before they’re put into use at scale. Calibration software is a lifesaver for anyone who runs, maintains, and/or performs maintenance on equipment. It allows the ability to automate all or part of the calibration process which saves time and can reduce bottom-line expenses. Gage Software helps manufacturers of all sizes keep track of calibrations for their test equipment.Starting Price: $999 one-time payment -
40
Insemito
Insemito
Insemito is a simple yet powerful and unique tool to manage your spare parts, tools and equipment for all types of operations from service to unforeseen breakdowns. Insemito software will keep track of all your equipment, expiry dates, documentation, history etc. with all data backed up in the cloud.Starting Price: $52/month/user -
41
Asset Tracking Database
Sunday Business Systems
Record calibration / validation history. Generate a Recall Report for “Out of Cal” Equipment. Record calibration / validation measurement values. Document responses when measuring equipment is found to be unfit for its intended purpose. Generate calibration certificates. Review detailed calibration reports. Create Preventive Maintenance Schedules. Define Preventive Maintenance Checklists. Track Unscheduled Maintenance. Generate Fix-It-Tickets. Control Miscellaneous Assets. Rich set of reports for detailed analysis. Control calibrated equipment. Easily generate a Calibration Recall report. Maintenance Due reports show the status of your equipment with a click of a button. A Vital Tool to ensure QMS compliance to ISO 9001, AS9100, ISO 13485, etc. Scan and link digital photographs, calibration certificates, or other electronic documents. No annual maintenance contracts are needed!Starting Price: $249 one-time payment -
42
CAQ.Net
CAQ AG Factory Systems
CAQ AG Factory Systems has established itself as one of the worldwide leading providers of quality management software. We have over 30 years of experience in the development and distribution of modular, multilingual, and industry-specific management solutions for small and medium-sized enterprises as well as multinational corporations. Our CAQ.Net software suite covers every aspect of computer aided quality assurance and was designed with the highest degrees of adaptability and customizability in mind. Just like a construction kit, our system allows you to pick the most suitable building blocks and thereby create the perfect solution to your individual quality management demands. -
43
Limble CMMS
Limble CMMS
Maintenance professionals across a variety of industries have a very real challenge: outdated, difficult-to-use, and expensive maintenance software. At Limble, we believe that you should love your CMMS, not just tolerate it. Limble CMMS was created to become the first truly easy-to-use, modern, and mobile CMMS that can be started in minutes with a return on investment within a matter of weeks. A few years later, we have ecstatic and pleased customers all over the world in manufacturing, mining, hospitality, office facilities, religious parishes, energy, restaurants, agriculture, and more.Starting Price: $35.00/month/user -
44
Sirwill FBM Tools
Sirwill Software
Designed and validated by our SPC / Six Sigma consultants, this is one of the most versatile and economical software for analyzing statistical process control (SPC) data. It can also compute the six sigma process metrics as well as predict the process average for Engineering Process Control (EPC). A must for all organizations and students pursuing Six Sigma. Our management consultants have vast experience in successfully implementing ISO9001:2015 / ISO14001:2015 / ISO17025:2017 / ISO22000:2018 / ISO27001:2013 / ISO45001:2018 / ISO50001:2018 / SA8000:2014 Management Systems at various client organisations around the world. On the basis of their experience, our consultants have prepared step-by-step system implementation guidelines that provide clear directions to managers (management representatives) who would plan and implement the system. Following these guidelines could cut down the cost and duration of your project substantially.Starting Price: $85 one-time payment -
45
Service Greeni
Key Computer Applications
Service management software that gives you the competitive advantage. Give your staff everything they need to become more productive, with access from anywhere, on any device. Become more competitive. With feature-rich functionality and intelligent data that helps you to stand out from the competition. Reduce costs. With no need to install and maintain costly hardware or out-of-date software. Complete jobs quicker. Boost productivity, maximize time in the field and get rid of unnecessary admin and paperwork. Scalable. Become more agile with an all-in-one cloud solution that grows and evolves with your business. Help your business stay ahead of the competition with a plethora of unrivaled features that connect your engineers, back office staff and customers. -
46
QUINDOS
Hexagon Metrology
With different analysis packages available it is possible to measure anything from machined parts to gears, blades, screw compressors, camshafts and more on a wide range of CMMs. QUINDOS is the leading modular metrology software for complex geometries used in aerospace, energy, automotive, and engineering. Choose from a wide range of modules to build precise measurement applications. Design your application and customise the UI for your machine operators. Highly programmable for the most complex geometries, QUINDOS offers structured programming and the option to build a custom command library with UI support. Find out how Siemens AG Turbines use QUINDOS and I++ Simulator high-pressure blades to fully visualise production and measurement in a single step. See how BMT Aerospace uses QUINDOS and I++ Simulator to streamline production with a virtual measuring room for offline testing -
47
Doble PowerBase
Doble
Doble PowerBase™ (PowerBase) is the premier application for administrators to manage and report on protection asset testing, settings, maintenance and engineering records. It helps simplify NERC PRC-005 compliance and trending. PowerBase lets you organize and consolidate test and settings data from disparate applications, spreadsheets and files. Use PowerBase to store, trend and report on relay testing data from software programs such as Doble RTS™ and Protection Suite. You can also track maintenance on CTs/VTs, breakers, transformers, batteries and any other asset. PowerBase uses import and export modules for data transfer with other systems and testing tools. Customize dashboards for snapshots of key testing and maintenance performance indicators needed for your compliance officers, supervisors, technicians and additional stakeholders. ata storage system for relay test, settings, maintenance and engineering records. -
48
CompuCal
CompuCal Calibration Solutons
Calibration Management Software for Manufacturing as supplied by CompuCal, allows for the accurate managing and scheduling of calibrations where data accuracy is paramount. This is where our calibration management software can work its magic. CompuCal calibration management software was developed to comply with the stringent regulations of the FDA. With the guidance and involvement of CompuCal’s customers in Ireland including Pfizer, GSK, Schering Plough and Roche, we have become experts in the requirements of regulated industry with regard to calibration management. -
49
Database Providers Calibration Management Software
Database Providers
Manage all measuring devices used within your organization using our simple, effective and efficient solution. Our solution includes a flexible and scalable approach to identifying, establishing calibration requirements, and communicating the status of all measuring devices/equipment/tools within the Calibration system. A quick and easy method for recording the successful calibration of each tool and the extension of the next due date. Scheduling of calibration is made easy using a calendar view of measuring devices’ calibration due dates. Our solution provides for automated emails to identify and communicate measuring devices whose calibration is past due, or due within the next 30 or 60 days; which has proven to increase the effectiveness of calibration programs. When used in conjunction with ISO 9001-based compliant calibration programs, this Calibrations Management Software provides for all required information, documentation and records. -
50
Gage Control Software
Quality Software Concepts
Gage Control Software is a straight-forward, hassle-free software solution for gage and test equipment calibration management. Affordable and easy to use, Gage Control Software is committed to delivering a comprehensive and personalized support to help businesses easily transition from a paper, Excel, or an out-dated software program. The solution allows for multiple concurrent users, increases efficiency by generating barcode labels directly to label printers, and enables users to organize and track tools and facilitates machine preventive maintenance while saving time and ensuring business continuity.