WSJT-Z Files

== Changelog
V1.48
[fixes]
- Fixed an issue where multiple consecutive QSOs with the same station on different bands would not be logged
- Fixed an issue where Z would stop sending RR73 and move on to the next caller if a late decode occurs
- Fixed Z not able to answer to combined messages
- Minor fixes 

[features]
- Renamed app, installer, modified default install path to wsjtz
- Automatically hiding/showing Raw view and PSK Reporter window when hiding/showing Z
- Added an option to show vertical bars in Wide Graph - checkbox in the Wide Graph Controls ( Thanks Uwe! :) )
- Added an option to automatically clear Wide Graph on band change - checkbox in the Wide Graph Controls
- Added button to clear Wide Graph ( X button in the top left of Wide Graph)
- Added an option to freeze Band Activity on mouse hover over (Settings -> WSJT-Z -> Freeze Band Activity on mouse hover)
- Added an option to remove extra characters from decodes (?, a1/a2/...) (Settings -> WSJT-Z -> Remove extra characters from decodes)
- Added a button to refresh PSKReporter window ("R" in the top left corner)
- Added option to set padding for the country column

V1.43
- Merged X 2.7.0 rc7
- Moved back to 1.22 code base
- Minor fixes and cleanup

V1.35
- Merged X 2.7.0 rc2
- Minor fixes and cleanup

V1.32
- Merged X 2.6.1
- Upgraded hamlib
- Upgraded to QT 5.15.2 (fixed issues with rearranging colors)
- Added the ability to hide/show columns in Band Activity and Rx Frequency (Settings->WSJT-Z->Columns)
- Minor fixes

V1.22
- Added option to execute command when custom alert is triggered (Settings->WSJT-Z->Custom alert command line)
- Added option to hold tx frequency in hound mode (Settings->WSJT-Z->No frequency changes for HOUND mode)
- Merged 2.5.4
- Added a button to automatically select a free frequency for TX (based on last few cycles)
- Added an option to automatically select a free frequency for TX after band or mode change (Settings->WSJT-Z->Find free TX freq after auto band change)
- Many fixes

V1.10
- Merged 2.5.0
- Added option to clear ignore list periodically
- Added total QSO counter in the status bar
- Added the ability to lock "TX even/1st" 
- Added the ability to set color of the separator line
- Minor fixes

V1.09
- Added PSKReporter feed (View->PSKReporter view)
- Added configuration option to show the bearing in the RX Window
- Added configuration option to clear RX windows when band change
- Added Raw View (View->Raw View) that displays unfiltered messages
- Fix for ACLog callbook lookup
- Minor adjustments to the layout to allow for better RX window resizing
- Other minor fixes

v0.95
- Added US state filtering/display (Settings->WSJT-Z->Show state for US callsigns)
- Fixed band selector colour in dark mode
- Fixed display issues in dark mode
- Merged 2.5.0 RC5
- Custom alerts will now show band and date
- UDP reply message will always force "Enable TX"
- Fixed an issue with DX fields not being cleared when re-sending RR73 to a station mulitple times

v0.81
- Added tooltips to various elements of the UI
- Added CQ Targets filtering "Show only" option to only show CQ messages with the specified targets
- Ignore list clear button resets the list using permanent ignore list
- Added option to Auto Tune after band change - for automatic antenna tuners
- Fixed Z not resetting ignore list properly when band hopping enabled
- Additional callsign validation before auto-calling (must contain a number, minimum length  3 characters)
- Added option to show distance on messages containing locator
- Added Permanent ignore list in Settings
- Pounce ehnancement - you can now type in the callsign, instead of having to right-click a message on the screen
- Added option to enable/disable responding to tailenders
- Locator from *Call Info* will be used when logging, if station didn't provide locator
- Locator from *Call Info* will be used when logging, if we have qrz.com integration enabled and locator retrieved is 6 characters

v0.74
- Ignore list cleared when band changed (with band hopping enabled)
- Special callsigns not sending the locator are used as priority when distance priority is selected
- Added ability to set WD timer per mode
- Added ability to write debug output to a file
- Added Reset WD button and option to disable resetting WD when clicking anywhere
- Added configuration option to highlight currently worked station
- Allow Z to respond to second station as soon as the last QSO is finished
- Show all messages directed to our callsign on the left pane
- Added option to enable/disable UDP filtering
- Increased number of decoder threads to 32
- Mulitple fixes


v0.57
- Added configuration option to apply filtering when using AutoCQ
- Added configuration option to set RX freq to TX freq when logged a QSO, WD timer expires or Halt TX button pressed
- Fixed WD not working in autocq mode
- Added Z information message
- Added a possibility to exclude or include specific CQ Targets

v0.52
- Fixed waterfall geometry issues
- Fixed AutoCall not working with INCLUDE filter
- Fixed AutoCQ responding to filtered callsigns
- Filtering now applies to UDP messages

v0.51
- Fixed 0.50 cosmetic issues
- Fixed "Treat 73's as CQ"
- Fixed colouring of 73/RR73 
- Other minor fixes


v0.50
- Merged wsjtx 2.3.0 
- fixed dark mode issues
- fixed AutoCQ filtering
- RXFreq now set to TXFreq when QSO logged or HALT pressed
- JTAlert 2.16.17 now working

v0.44
- Band hopping - Z will change bands baseed on time of day and number of CQ/AutoCall attempts on a band; sample configuration (HOUR:BAND1,BAND2,BAND3...):
	12:20m,40m
	18:80m,40m,15m
	22:160m
- Automatic mode switching - Z will switch between Auto Call / Auto CQ modes after trying N times

v0.39
- AutoCall priority: Z can now select the station to call by the signal strength or the distance
- Fixed Z unchecking "Hold TX Freq" under some circumstances

v0.37
- Merged 2.2.1 

v0.36
- Removed dependency on "Blank line between decoding periods" for AutoCall

v0.35
- Updated code base to wsjtx 2.2

v0.32
- Pounce ignores TX watchdog
- Changing to hound mode does not reset frequency
- Fixed colouring of messages sent to our callsign


V0.31
- (Fixed) You can now manually enter a call in Call Info and push a button to do a lookup
- Yet another fix for silly JTAlert code blocking wsjt-z ;) Simplistic approach shows level of coding skills of the developer and their ignorance. 
- Ported fix from WSJT-X v.2.1.1 to resolve <...> showing up for some stations

V0.30
- You can now manually enter a call in Call Info and push a button to do a lookup
- Fix for silly JTAlert code blocking wsjt-z ;)


V0.29
- F/H dropdown
- RaspberryPi package (Hit F12 or select Mini checkbox for the best layout on RPi) 
- Minor UI tweaks to accomodate RPi touchscreen size

V0.28
- Filtering bypass (Bottom-right corner -> Filtering checkbox)
- Show colours for all messages (Settings->WSJT-Z)
- Compiled with QT 5.5 - Windows XP support


V0.27.1
- QRZ.COM issue fix

V0.27
- Moved "Dock" option to View menu 
- Added Call Info section (View->Call info) - Ctrl+click on a callsign to trigger it manually
- Added QRZ.COM integration (Needs to be set up in settings->WSJT-Z)
- Fixed the CQ Target filter to allow for filtering "CQ TEST" calls
- Coloured the Azimuth / distance label in the status bar for Steve ;)
- WSJT-Z will not be saving *.wav files when Save->None is selected (less I/O)
- Added option to disable saving ALL.TXT and FoxQSO.log (less I/O) (In settings->WSJT-Z)


V0.26
- Added Date to status bar

V0.25
- UI Layout changes to optimize space of the RX Frequency area
- Azimuth / distance moved to Status bar

V0.24
- Clear DX: Double-click on tx6 radio button clears the TX fields
- Progress bar will turn red when transmitting
- Right-click menu: Copy row option


V0.23
- Minor UI fixes for docking
- Wide-Graph: single click changes TX&RX freq
- Wide-Graph: Ctrl+click changes RX freq
- Wide-Graph: Shift+click changes TX freq

V0.22
- Waterfall window can now be docked to WSJT-Z (using dock checkbox)

V0.21
- Preventing switching to contest modes in Auto CQ mode

V0.20
- Fixed the JTAlert connection issue

V0.19
- Auto Call forces "New call on band" (due to high number of 'it calls the same station multiple times' emails) 
- Auto CQ forces "Call 1st" and "Auto Seq" 

V0.18
- Cosmetical changes

V0.17
- Preventing duplicate log entries (for mulitple RR73 etc)

V0.16
- Added custom alerts
- Added tooltips for all functions of wsjt-z

V0.15
- Added alerting

V0.14
- Fixed right-click issue
- Fixed AutoCQ

V0.12
- Added QRZ Lookup right-click option
- Fixed some filtering issues
- Minor bugfixes

V0.11.1
- Moved F/H indicator and RX All Freq to main screen

V0.11
- Merged RC7
- Preventing switching to contest modes in Auto Call

V0.10 
- Prefixes filter now allows to exclude/include all prefixes from a particular dxcc
- Treat 73's as CQ - this will show all stations transmitting 73/RR73 in CQ Only mode, it will also colour that row accordingly and display DXCC for it. In this mode WSJTX will force the user to lock the TX Freq, to make sure they don't transmit over the final 73
- Mini mode - see few posts above - a mini UI useful for small screens (RPi etc)
- minor fixes