TekDT USB Creator Files

***************  INTRUCTIONS  ***************
Step 1: Download TekDT USB Creator_NoISO_EN.zip file
Step 2: After downloading, extract the TekDT USB Creator_NoISO_EN.zip file.
Step 3: Double-click the TekDTUSBCreator.exe file to open the software.
Step 4: Select Windows version and click Next.
Step 5: Click Start and Done!

***************  CHANGE LOG  ***************
Version 2022.09.26 (First)
- Customize each integrated win installer, diversify products, suitable for each customer's needs.
- The installers are all original ISO files, which can be downloaded directly from Microsoft without modifying any components, even 1 bit (md5 code can be compared with the original file from Microsoft). If the installer is lost or the installer is corrupted, you can download it again from the Microsoft homepage or the download link from TekDT.
- Fill the USB, to avoid the virus changing data inside the USB, causing boot loss.
- Rename the USB after the installation is complete to personalize the brand with customers.
- Eject USB once done.
- Change boot screen wallpaper to increase brand recognition.
- Create a trial license for the customer (if this feature is enabled, the USB will still be created normally, but will not install the software automatically after installing win).
- Check integrity, to limit errors. Avoid errors during the USB creation process, but it will take a little longer.
- Validate USB by serial number, via USB attached license. Surely only USB made from software can be used.
- Configure as you like the software that needs to be installed after installing windows, with more than 40 necessary software selected by TekDT.
- Features inside the installer:
+ Simple but necessary toolkit, supports partition / partition / hard drive management, drive browser to save data, RAM test program directly from Windows Setup environment without entering WinPE.
+ Give advice on deleting unnecessary partitions to increase free space for the hard drive.
+ Prevent activity and show notifications for unauthenticated USBs.
+ Automatically install software according to predefined configurations.
+ Save the configuration automatically for the next use.

Version 2022.10.06
- Fix bugs and optimize automatic operation with Ventoy.

Version 2022.10.13
- Added automatic driver integration feature in Windows installation environment.
- Supports USB 3.0 hardware compatibility, NVMe SSD hard drives, multiple motherboards on all Windows 7, 10 and 11 installers (enabled after using Driver integration in Windows installation environment) .
- Supports both UEFI and Legacy modes on Windows 7, running on high-end CPUs (enabled after using Driver integration feature in Windows installation environment).
Note: Because editing ISO files for commercial purposes is not allowed, TekDT introduces automatic integration when user selects this feature.

Version 2022.10.21
- Fix the wrong configuration of autosave software.
- Performance improvements for the software.

Version 2022.11.13
- Added perpetual copyright feature
- Fix backlog bugs.

Version 2022.12.15
- Added support for Windows 7 32Bit and Windows 10 32Bit.
- Now TekDT USB Creator has added support for 32Bit structure for 2 versions of Windows 7 and Windows 10, but can only boot in Legacy mode because Microsoft does not support UEFI for 32Bit structure.
- Add payment order creation and automatic activation to the software, without manual activation by TekDT.
- Fix bugs.

Version 2022.12.19
- Add the feature to download the installer when the installer cannot be found inside the ISO folder.
- Add total capacity tracking status after creating USB, to help you easily choose the right USB capacity.
- With the Free package and the Support package, starting from this version, after activation, you will use the software forever and always receive new updates from TekDT, instead of 3 days and 6 months like before.

Version 2022.12.22
- Fixed some display errors.

Version 2022.12.26
- Fix boot related error.

Version 2022.12.30
- Support to create Boot on the hard drive, no USB can still be used (Only NTFS formatted hard drives are supported and not the same as the one in which the operating system is installed, because Windows only supports this format when dividing partitions to boot ).
- Fixed crash when pressing Start creating USB/Boot hard drive.
- Optimized for weak machines, faster software startup.

Version 2023.02.13
- Added the feature to check and update the version on the USB/Hard drive that has been created.
- Add a suggestion feature to turn off motion effects to reduce lag when using the software.
- Fixed some interactive errors when using.

Version 2023.02.16
- It is now possible to create a direct installer from any hard drive using a new technique that supports both Legacy and UEFI standards (previously only supported computers with at least 2 hard drives and had to meet certain conditions). other specific circumstances).
- Add the feature to give suggestions, instructions on how to press the key to BootMenu and BIOS/UEFI of the current computer, so that users can more easily manipulate.
- Faster and more accurate disk change detection.
- Fixed a bug that calculates the total capacity more accurately.
- Fix flickering when starting the software.
- Fix update and automatic download.

Version 2023.02.19
- Support from Windows 7 and above (previously to run the software, required from Windows 10).
- Updated English version.

Version 2023.02.20
- Fix "Cannot create new partition" error on some computers.
- Changed how Hard Drive/USB is displayed.

Version 2023.02.28
- Updated Curl library to the latest version and fixed the error of not downloading automatically on some computers.
- Translate some modules to English.

Version 2023.03.01
- Added direct download mode without CURL, due to too many errors downloading from CURL.

Version 2023.03.04
- Improved the process of creating a new partition to hold the Windows installer on the hard drive.

Version 2023.03.06
- Change the download link of Windows installation packages (ISO format) to https://archive.org/ for a more stable download.
- Fix some bugs.

Version 2023.03.09
- Change link to update.
- Update config of some software TekDT Auto Installer.

Version 2023.03.12
- Update and replace quick tools in WinpE environment.
- Force installation of Windows according to the selected version regardless of which version of Windows was previously used.

Version 2023.03.16
- Fix bugs.
- Update new drivers for Windows 10 and Windows 11.

Version 2023.03.19
- Change some options of the interface layout.
- Fix some bugs.

Version 2023.03.20
- Bypass login Microsoft account require.
- Prevent BitLocker auto enable on Windows 11.

Version 2023.03.21
- Fix update core.
- Fix deep built-in driver in Windows Setup.

Version 2023.03.22
- Fix bugs.
- Add link Telegram group in Support menu.

Version 2023.03.26
- Enhanced support for ISO file installers containing the install.esd format
- Increased ability to detect installer errors.
- Fix update bug.

Version 2023.03.27
- Reduce loading time when opening software.
- Update Generic Key for Windows Setup.
- Improved download speed on FAT32 partition.

Version 2023.03.31
- Remove old drivers.
- Automatically detect BitLocker encrypted partitions and give warnings.

Version 2023.04.08
- Improved boot speed.
- Added option to read installer information, without restarting the software.
- Fix download error.

Version 2023.06.11
- Complete translation in a single package 95%.
- Bug fixes.

Version 2023.06.14
- Complete translation in a single package 100%.
- Bug fixes for detect USB.

Version 2023.06.18
- Bugs fixed

Version 2023.06.25
- Update new drivers.

Version 2023.06.27 (Last)
- Improved detection of hard drive/USB drive when creating installers on hard drives.