Poco M4 Pro/Redmi Note 11S Files

~Requirements For The Procedure -
# Pc
# Few Drivers & Softwares
# Fastboot Rom of the device (Fleur)
# BRICKED / BOOTLOOPING phone
# Data Cable For Connection With Pc
# Patience
# Brain
# Stable Internet 

~Let's Begin With The Process Now -
# Extract The Fastboot Rom of The Device.
# COPY Boot.img , Vbmeta.img , Vbmeta_system.img , Vbmeta_vendor.img TO MTK CLIENT FOLDER.
# Open Terminal/Cmd In The Mtkclinet-main Folder & Setup it By Running :
- pip install -r requirements.txt
# Now Connect Your Phone In Brom Mode (Volume Up + Volume Down + Power Button Simultaneously) With Pc Using Data Cable.
# Run The Following Commands In Order Wise Sequence In Mtkclinet :
- Python mtk w vbmeta_a vbmeta.img
- Python mtk w vbmeta_b vbmeta.img
- Python mtk w vbmeta_system_a vbmeta_system.img
- Python mtk w vbmeta_system_b vbmeta_system.img
- Python mtk w vbmeta_vendor_a vbmeta_vendor.img
- Python mtk w vbmeta_vendor_b vbmeta_vendor.img
- Python mtk w boot_a boot.img
- Python mtk w boot_b boot.img

~NOTES -
# You May Need To Connect Your Phone Again And Again In Brom.
# Don't Disconnect Your Device In Between The Process To Prevent Any Hardware Damage.
# If Facing Any Errors Then Check Drivers Properly & Commands That You Are Typing.

~WARNING ⚠️
# DON'T COPY/EDIT/HOST THIS GUIDE ANYWHERE ELSE WITHOUT PERMISSION.
# IF FOUND COPYING OR EDITED ON ANY PLATFORM THEN ACTIONS WILL BE TAKEN IMMEDIATELY.